Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.

Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

For outdoor painting jobs, this plastic tape stands up to the elements. The high-tack adhesive works on rough exterior surfaces, such as stucco and masonry.

This tubular foam tape compresses to fill the gaps around door jambs and other openings that flat masking tape can't.

Brush on this liquid to mask small surfaces and irregular shapes.

Use these crepe paper discs to mask areas while spray painting, as well as to temporarily cover holes for dust protection.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.

Cover small spots and holes while paint stripping and electroplating, or use as a moisture and dust barrier. These aluminum foil discs are flexible and conform to irregular shapes.

Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.

Low-pile velvet cushions surfaces and absorbs sound. Use it between parts and in acoustic applications.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.

Protect signs posted on windows, glass, and other surfaces from debris and moisture without obstructing clarity.

Made of pinhole-free crepe paper to seal out light. It is often used in photo processing labs.

Outline and draw attention to safety zones and hazards with this tape.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

Often used for weatherstripping and sealing gaps around windows, doors, and hatches; this tough tape keeps out moisture, dirt, heat, and cold.

Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.

Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.

Make invisible repairs with this clear tape. The weatherproof adhesive won't turn yellow outdoors.

This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.

This uncoated tape is thinner and more conformable than our other repair tape to reinforce irregular shapes.

Create dams in pipes before welding, then wash away with water or steam.

Used to mount panels, signs, and dispensers, this foam tape absorbs shock and provides high strength holding power on rigid surfaces.

Tape is cut into convenient discs and rectangles.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Remove mounted objects from most surfaces without leaving residue behind.

Use this tape outdoors for sealing and mounting signs and security control panels.

Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.

Use this clear tape for strong, invisible bonds.

Create strong, permanent bonds that can replace mechanical fasteners.

These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.

Use these clear sheets for strong, invisible bonds.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.

Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.

Our thinnest duct tape, this tape is easy to unwind and tear by hand.

For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.

Seal foil-jacketed insulation as well as air-conditioning and refrigeration systems with this conformable aluminum tape.

Our most slippery tape, the slick surface allows items to glide smoothly over it.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Low-Friction Tape Shapes Made with Teflon® PTFE.

Protect small parts with these slippery UHMW rings, discs, and squares.

Dissipate static and create a slick surface.

Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.

This tape discharges minor amounts of surface static electricity and resists static buildup.

PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.

This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

Also known as Scotchfil, this noncorrosive putty tape wraps, stretches, and molds around irregular shapes for insulation buildup.

Use this rubber tape to splice cable in high-voltage applications.

Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.

Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

The adhesive on this conformable aluminum foil tape is electrically conductive for use on surfaces that can't be soldered. Use it to shield cables and electronic components from EMI (electromagnetic interference).

A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.

Made of woven polyethylene fabric, this is the most puncture-, abrasion-, and tear-resistant surface protection we offer. Commonly used on heavy equipment, it guards metal, plastic, composite, and painted surfaces from damage. It can also be used as a protective layer beneath other materials.

Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

With its reflective, mirror-like finish, this film is often used to repair or create new decorative finishes on edge trim, panels, and other flat surfaces.

Patch rips and seal gloves, boots, and respirators to clothing with this chemical-resistant tape.

Cover heavily-used ADA-compliant door handles to help keep them free of germs. These covers are clear in color, so details on the handle show through.

Apply this tape to handles, pull and push bars, and other frequently-touched surfaces to help limit the spread of germs and diseases.

Protect weary feet from blisters and cushion existing corns and calluses.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Silicone maintains its flexibility across a wide range of temperatures.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Also known as Ethafoam.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.

Make your markings stand out with this fluorescent tape.