Filter by
Shaft Diameter
Bearing Type
Shaft Type
OD
Shaft Material
ID
Linear Bearing Component
Alignment Style
Overall Length
Lubrication
Bearing Material
Housing Type
Static Load Capacity
Shaft Clearance
Dynamic Linear Load Capacity @ Speed
For Housing ID
Maximum Temperature
Overall Height
RoHS
Export Control Classification Number (ECCN)
REACH
DFARS Specialty Metals
Linear Sleeve Bearings
Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
Self-Aligning with 2° Misalignment Capability
![]() |
PTFE Liner |
Self-aligning bearings compensate for shaft misalignment.
PTFE Liner—PTFE-lined bearings are chemical resistant and nonabrasive. They have a ceramic coating for added corrosion resistance.
0.001" Shaft Clearance—Bearings with 0.001" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
0.0015" Shaft Clearance—Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Linear Bearings | Retaining Rings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp., ° F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Shaft Dia. | Shaft Clearance | Overall Lg. | OD | For Housing ID | With Retaining Ring Grooves | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | Each | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" | 0.001" | 3/4" | 1/2" | 0.5000" to 0.5005" | Yes | 0.517" | No | 50 lb. @ 100 fpm | 935 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 000000 | 1 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/8" | 0.001" | 7/8" | 5/8" | 0.6250" to 0.6255" | Yes | 0.642" | No | 90 lb. @ 100 fpm | 1,600 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.001" | 1 1/4" | 7/8" | 0.8750" to 0.8755" | Yes | 0.971" | No | 150 lb. @ 100 fpm | 3,100 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.001" | 1 1/2" | 1 1/8" | 1.1250" to 1.1255" | Yes | 1.116" | No | 250 lb. @ 100 fpm | 4,600 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.001" | 1 5/8" | 1 1/4" | 1.2500" to 1.2505" | Yes | 1.178" | No | 350 lb. @ 100 fpm | 6,100 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.001" | 2 1/4" | 1 9/16" | 1.5625" to 1.5630" | Yes | 1.765" | No | 600 lb. @ 100 fpm | 11,000 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/4" | 0.001" | 2 5/8" | 2" | 2.0000" to 2.0010" | Yes | 2.055" | No | 900 lb. @ 100 fpm | 16,000 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 0.0015" | 3" | 2 3/8" | 2.3750" to 2.3760" | Yes | 2.43" | No | 1,000 lb. @ 100 fpm | 22,000 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 000000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 0.0015" | 4" | 3" | 3.0000" to 3.0010" | Yes | 3.21" | No | 2,000 lb. @ 100 fpm | 40,000 | -400 | 375 | Aluminum, Stainless Steel | 000000 | 000000 | 1 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 mm | 0.001" | 25 mm | 16 mm | 16.000 mm to 16.018 mm | Yes | 16.2 mm | No | 90 lb. @ 100 fpm | 1,100 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 mm | 0.001" | 32 mm | 22 mm | 22.000 mm to 22.021 mm | Yes | 22.6 mm | No | 150 lb. @ 100 fpm | 2,200 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 mm | 0.001" | 36 mm | 26 mm | 26.000 mm to 26.021 mm | Yes | 24.6 mm | No | 250 lb. @ 100 fpm | 3,300 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 mm | 0.001" | 45 mm | 32 mm | 32.000 mm to 32.025 mm | Yes | 31.2 mm | No | 350 lb. @ 100 fpm | 5,200 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 mm | 0.001" | 58 mm | 40 mm | 40.000 mm to 40.025 mm | Yes | 43.7 mm | No | 600 lb. @ 100 fpm | 8,400 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 mm | 0.001" | 68 mm | 47 mm | 47.000 mm to 47.025 mm | Yes | 51.7 mm | No | 900 lb. @ 100 fpm | 11,800 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fixed Alignment
![]() |
PTFE Liner |
Fixed-alignment bearings are for use where shaft misalignment is unlikely.
PTFE Liner—PTFE-lined bearings are chemical resistant and nonabrasive. They have a ceramic coating for added corrosion resistance.
0.001" Shaft Clearance—Bearings with 0.001" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Linear Bearings | Retaining Rings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp., ° F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Shaft Dia., mm | Shaft Clearance | Overall Lg., mm | OD, mm | For Housing ID | With Retaining Ring Grooves | Retaining Ring Groove End-to-End Lg., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | Each | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | 0.001" | 25 | 16 | 16.000 mm to 16.018 mm | Yes | 16.2 | No | 90 lb. @ 100 fpm | 1,100 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 000000 | 1 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.001" | 32 | 22 | 22.000 mm to 22.021 mm | Yes | 22.6 | No | 150 lb. @ 100 fpm | 2,200 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | 0.001" | 36 | 26 | 26.000 mm to 26.021 mm | Yes | 24.6 | No | 250 lb. @ 100 fpm | 3,300 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0.001" | 45 | 32 | 32.000 mm to 32.025 mm | Yes | 31.2 | No | 350 lb. @ 100 fpm | 5,200 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dust-Resistant Linear Sleeve Bearings
Ridges on the inside of these bearings wipe away dust and debris. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually). All bearings are lined with lightweight, corrosion- and chemical-resistant PTFE.
Self-Aligning with 0.5° Misalignment Capability
![]() |
PTFE-Lined 6061 Aluminum Bearings |
Self-aligning bearings compensate for shaft misalignment.
PTFE-Lined 6061 Aluminum Bearings—6061 aluminum bearings have good corrosion resistance, and have a higher load capacity than bearings made entirely of PTFE.
Linear Bearings | Retaining Rings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp., ° F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Shaft Dia. | Shaft Clearance | Overall Lg. | OD | For Housing ID | With Retaining Ring Grooves | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | Each | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" | 0.0016" to 0.0032" | 3/4" | 1/2" | 0.5000" to 0.5007" | Yes | 0.527" | No | 15 lb. @ 100 fpm | 945 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 000000 | 1 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/8" | 0.0016" to 0.0032" | 7/8" | 5/8" | 0.6250" to 0.6257" | Yes | 0.652" | No | 30 lb. @ 100 fpm | 825 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.0016" to 0.0032" | 1 1/4" | 7/8" | 0.8750" to 0.8758" | Yes | 0.987" | No | 60 lb. @ 100 fpm | 1,500 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.0016" to 0.0032" | 1 1/2" | 1 1/8" | 1.1250" to 1.1258" | Yes | 1.136" | No | 90 lb. @ 100 fpm | 2,300 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.0016" to 0.0032" | 1 5/8" | 1 1/4" | 1.2500" to 1.2510" | Yes | 1.198" | No | 115 lb. @ 100 fpm | 3,000 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.002" to 0.0041" | 2 1/4" | 1 9/16" | 1.5625" to 1.5635" | Yes | 1.789" | No | 215 lb. @ 100 fpm | 5,600 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/4" | 0.002" to 0.0041" | 2 5/8" | 2" | 2.0000" to 2.0010" | Yes | 2.039" | No | 315 lb. @ 100 fpm | 8,200 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 0.002" to 0.0041" | 3" | 2 3/8" | 2.3750" to 2.3760" | Yes | 2.463" | No | 435 lb. @ 100 fpm | 11,000 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 mm | 0.032 mm to 0.07 mm | 25 mm | 16 mm | 16.000 mm to 16.018 mm | Yes | 16.4 mm | No | 30 lb. @ 100 fpm | 1,500 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 mm | 0.03 mm to 0.088 mm | 29 mm | 19 mm | 19.000 mm to 19.021 mm | Yes | 21.8 mm | No | 40 lb. @ 100 fpm | 1,100 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 mm | 0.03 mm to 0.088 mm | 32 mm | 22 mm | 22.000 mm to 22.021 mm | Yes | 22.8 mm | No | 55 lb. @ 100 fpm | 1,500 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 mm | 0.03 mm to 0.088 mm | 36 mm | 26 mm | 26.000 mm to 26.021 mm | Yes | 24.9 mm | No | 85 lb. @ 100 fpm | 2,200 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 mm | 0.03 mm to 0.091 mm | 45 mm | 32 mm | 32.000 mm to 32.025 mm | Yes | 31.5 mm | No | 135 lb. @ 100 fpm | 3,500 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 mm | 0.04 mm to 0.11 mm | 68 mm | 47 mm | 47.000 mm to 47.025 mm | Yes | 52.1 mm | No | 305 lb. @ 100 fpm | 8,000 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fixed Alignment
Fixed-alignment bearings are designed for use with round, end-supported shafts where shaft misalignment is unlikely.
PTFE-Lined 6061 Aluminum Bearings—6061 aluminum bearings have good corrosion resistance, and have a higher load capacity than bearings made entirely of PTFE.
Linear Bearings | Retaining Rings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp., ° F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Shaft Dia. | Shaft Clearance | Overall Lg. | OD | For Housing ID | With Retaining Ring Grooves | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | Each | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/8" | 0.002" to 0.0044" | 7/8" | 5/8" | 0.6250" to 0.6257" | Yes | 0.689" | No | 30 lb. @ 100 fpm | 415 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 000000 | 1 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.0013" to 0.0036" | 1 1/4" | 7/8" | 0.8750" to 0.8758" | Yes | 1.012" | No | 60 lb. @ 100 fpm | 555 | -40 | 194 | Aluminum, Stainless Steel, Steel | 0000000 | 0000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.0013" to 0.0036" | 1 1/2" | 1 1/8" | 1.1250" to 1.1258" | Yes | 1.095" | No | 90 lb. @ 100 fpm | 990 | -40 | 194 | Aluminum, Stainless Steel, Steel | 0000000 | 0000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.0013" to 0.0036" | 1 5/8" | 1 1/4" | 1.2500" to 1.2510" | Yes | 1" | No | 100 lb. @ 100 fpm | 1,400 | -40 | 194 | Aluminum, Stainless Steel, Steel | 0000000 | 0000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.0013" to 0.0036" | 2 1/4" | 1 9/16" | 1.5625" to 1.5635" | Yes | 1.864" | No | 200 lb. @ 100 fpm | 2,000 | -40 | 194 | Aluminum, Stainless Steel, Steel | 000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/4" | 0.002" to 0.0044" | 2 5/8" | 2" | 2.0000" to 2.0010" | Yes | 1.984" | No | 315 lb. @ 100 fpm | 4,100 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 0.0024" to 0.0053" | 4" | 3" | 3.0000" to 3.0010" | Yes | 3.163" | No | 775 lb. @ 100 fpm | 10,000 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 mm | 0.032 mm to 0.075 mm | 29 mm | 19 mm | 19.000 mm to 19.021 mm | Yes | 21.6 mm | No | 40 lb. @ 100 fpm | 570 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 mm | 0.032 mm to 0.075 mm | 32 mm | 22 mm | 22.000 mm to 22.021 mm | Yes | 22.6 mm | No | 55 lb. @ 100 fpm | 755 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 mm | 0.032 mm to 0.075 mm | 36 mm | 26 mm | 26.000 mm to 26.021 mm | Yes | 24.6 mm | No | 85 lb. @ 100 fpm | 1,100 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 mm | 0.04 mm to 0.092 mm | 45 mm | 32 mm | 32.000 mm to 32.025 mm | Yes | 31.2 mm | No | 135 lb. @ 100 fpm | 1,700 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 mm | 0.04 mm to 0.092 mm | 58 mm | 40 mm | 40.000 mm to 40.025 mm | Yes | 43.7 mm | No | 215 lb. @ 100 fpm | 2,800 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 mm | 0.04 mm to 0.092 mm | 68 mm | 47 mm | 47.000 mm to 47.025 mm | Yes | 51.7 mm | No | 305 lb. @ 100 fpm | 4,000 | -40 | 194 | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
40 mm | 0.06 mm to 0.112 mm | 80 mm | 62 mm | 62.000 mm to 62.030 mm | Yes | 60.3 mm | No | 480 lb. @ 100 fpm | 6,200 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/8" | 0.0008" to 0.0016" | 7/8" | 5/8" | 0.6250" to 0.6257" | Yes | 0.644" | No | 30 lb. @ 100 fpm | 825 | -40 | 194 | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.0008" to 0.0016" | 1 1/4" | 7/8" | 0.8750" to 0.8758" | Yes | 0.979" | No | 60 lb. @ 100 fpm | 1,500 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.0008" to 0.0016" | 1 1/2" | 1 1/8" | 1.1250" to 1.1258" | Yes | 1.124" | No | 90 lb. @ 100 fpm | 2,300 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.0008" to 0.0016" | 1 5/8" | 1 1/4" | 1.2500" to 1.2510" | Yes | 1.186" | No | 115 lb. @ 100 fpm | 3,000 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.0008" to 0.0016" | 2 1/4" | 1 9/16" | 1.5625" to 1.5635" | Yes | 1.773" | No | 215 lb. @ 100 fpm | 5,600 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/4" | 0.001" to 0.0021" | 2 5/8" | 2" | 2.0000" to 2.0010" | Yes | 2.023" | No | 315 lb. @ 100 fpm | 8,200 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 mm | 0 mm to 0.058 mm | 29 mm | 19 mm | 19.000 mm to 19.021 mm | Yes | 21.6 mm | No | 40 lb. @ 100 fpm | 1,100 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 mm | 0 mm to 0.058 mm | 32 mm | 22 mm | 22.000 mm to 22.021 mm | Yes | 22.6 mm | No | 55 lb. @ 100 fpm | 1,500 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 mm | 0 mm to 0.058 mm | 36 mm | 26 mm | 26.000 mm to 26.021 mm | Yes | 24.6 mm | No | 85 lb. @ 100 fpm | 2,200 | -40 | 194 | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 mm | 0 mm to 0.061 mm | 45 mm | 32 mm | 32.000 mm to 32.025 mm | Yes | 31.2 mm | No | 135 lb. @ 100 fpm | 3,500 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 mm | 0 mm to 0.061 mm | 58 mm | 40 mm | 40.000 mm to 40.025 mm | Yes | 43.7 mm | No | 215 lb. @ 100 fpm | 5,700 | -40 | 194 | Aluminum, Stainless Steel, Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ultra-Thin Linear Sleeve Bearings
Thinner than standard linear sleeve bearings, these bearings fit where clearance is a concern. Pair them with round end-supported shafts. They have fixed alignment, so they’re best for applications where shaft misalignment is unlikely. The PTFE lining stands up to chemicals and won’t scratch the shaft. To install, slide them into a housing (not included).
Fixed Alignment
![]() |
Temp., ° F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Overall Lg., mm | OD, mm | For Housing ID | With Retaining Ring Grooves | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | 0.038 | 22 | 12 | 12.000 mm to 12.018 mm | No | No | 70 lb. @ 100 fpm | 760 | -400 | 375 | Stainless Steel, Steel | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | 0.038 | 24 | 15 | 15.000 mm to 15.018 mm | No | No | 80 lb. @ 100 fpm | 1,100 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | 0.038 | 26 | 17 | 17.000 mm to 17.018 mm | No | No | 250 lb. @ 100 fpm | 1,500 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.038 | 28 | 19 | 19.000 mm to 19.021 mm | No | No | 250 lb. @ 100 fpm | 1,950 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
14 | 0.038 | 28 | 21 | 21.000 mm to 21.021 mm | No | No | 300 lb. @ 100 fpm | 2,250 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | 0.05 | 30 | 24 | 24.000 mm to 24.021 mm | No | No | 350 lb. @ 100 fpm | 2,750 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0.05 | 30 | 28 | 28.000 mm to 28.021 mm | No | No | 450 lb. @ 100 fpm | 3,450 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.05 | 40 | 35 | 35.000 mm to 35.025 mm | No | No | 600 lb. @ 100 fpm | 5,800 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
50 | 0.0625 | 70 | 62 | 62.000 mm to 62.023 mm | No | No | 2,000 lb. @ 100 fpm | 20,300 | -400 | 375 | Stainless Steel, Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mounted Linear Sleeve Bearings
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. All are for use with round end-supported shafts.
Self-Aligning with 2° Misalignment Capability
![]() |
Self-aligning bearings compensate for shaft misalignment.
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia., mm | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined Ceramic-Coated 6061 Aluminum Bearings with Anodized 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | 0.013 | 44 | 50 | 38.5 | 19 | No | 200 lb. @ 100 fpm | 3,300 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 4.3 | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0.013 | 53 | 54 | 41 | 21 | No | 300 lb. @ 100 fpm | 5,200 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5.2 | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.013 | 67 | 76 | 51.5 | 26 | No | 500 lb. @ 100 fpm | 4,800 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 7 | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
40 | 0.013 | 90 | 102 | 78 | 40 | No | 1,000 lb. @ 100 fpm | 18,600 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 8.7 | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fixed Alignment
![]() |
Fixed-alignment bearings are for use where shaft misalignment is unlikely.
0.001" Shaft Clearance—Bearings with 0.001" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Overall | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Ctr. Ht. | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" | 0.001" | 1 3/16" | 1 5/8" | 13/16" | 7/16" | No | 50 lb. @ 100 fpm | 935 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/8" | 0.001" | 1 5/16" | 1 3/4" | 15/16" | 1/2" | No | 90 lb. @ 100 fpm | 1,600 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.001" | 1 11/16" | 2" | 1 1/4" | 11/16" | No | 150 lb. @ 100 fpm | 3,100 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.001" | 1 15/16" | 2 1/2" | 1 5/8" | 7/8" | No | 200 lb. @ 100 fpm | 4,600 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.001" | 2 1/16" | 2 3/4" | 1 3/4" | 15/16" | No | 300 lb. @ 100 fpm | 6,100 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.001" | 2 13/16" | 3 1/4" | 2 3/16" | 1 3/16" | No | 500 lb. @ 100 fpm | 11,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 7/32" | 000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/4" | 0.001" | 3 5/8" | 4" | 2 13/16" | 1 1/2" | No | 900 lb. @ 100 fpm | 16,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 7/32" | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 0.001" | 4" | 4 3/4" | 3 1/4" | 1 3/4" | No | 1,000 lb. @ 100 fpm | 22,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 9/32" | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 0.001" | 5" | 6" | 4 1/16" | 2 1/8" | No | 2,000 lb. @ 100 fpm | 40,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 13/32" | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mounted Linear Sleeve Bearings for Support Rail Shafts
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. Mount them on a support rail shaft for applications requiring maximum rigidity.
Self-Aligning with 2° Misalignment Capability
![]() |
Self-aligning bearings compensate for shaft misalignment.
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | Wd., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia., mm | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined Ceramic-Coated 6061 Aluminum Bearings with Anodized 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | -0.038 to -0.013 | 39 | 40 | 27.6 | 17 | 8.5 | No | 150 lb. @ 100 fpm | 2,200 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5 | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | -0.038 to -0.013 | 45 | 45 | 33 | 20 | 10 | No | 200 lb. @ 150 fpm | 3,300 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5 | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | -0.038 to -0.013 | 50 | 48 | 39 | 23 | 10 | No | 300 lb. @ 100 fpm | 5,200 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 6 | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | -0.038 to -0.013 | 65 | 60 | 47 | 27 | 11.5 | No | 500 lb. @ 100 fpm | 8,400 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 6 | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 | -0.038 to -0.013 | 70 | 70 | 56 | 33 | 14 | No | 900 lb. @ 100 fpm | 11,850 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 8 | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
40 | -0.038 to -0.013 | 90 | 90 | 72 | 42 | 19 | No | 1,000 lb. @ 100 fpm | 18,600 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 10 | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fixed Alignment
![]() |
Fixed-alignment bearings are for use where shaft misalignment is unlikely.
0.001" Shaft Clearance—Bearings with 0.001" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Overall | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Ctr. Ht. | Wd. | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" | 0.001" | 1 3/16" | 1 5/8" | 3/4" | 7/16" | 1/16" | No | 50 lb. @ 100 fpm | 935 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/8" | 0.001" | 1 5/16" | 1 3/4" | 7/8" | 1/2" | 1/8" | No | 90 lb. @ 100 fpm | 1,600 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.001" | 1 11/16" | 2" | 1 1/8" | 11/16" | 5/16" | No | 150 lb. @ 100 fpm | 3,100 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.001" | 1 15/16" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | No | 200 lb. @ 100 fpm | 4,600 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.001" | 2 1/16" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | No | 300 lb. @ 100 fpm | 6,100 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.001" | 2 13/16" | 3 1/4" | 2" | 1 3/16" | 9/16" | No | 500 lb. @ 100 fpm | 11,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 7/32" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/4" | 0.001" | 3 5/8" | 4" | 2 1/2" | 1 1/2" | 5/8" | No | 900 lb. @ 100 fpm | 16,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 7/32" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 0.001" | 4" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | No | 1,000 lb. @ 100 fpm | 22,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 1/4" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 0.001" | 5" | 6" | 3 5/8" | 2 1/8" | 1" | No | 2,000 lb. @ 100 fpm | 40,000 | -400 | 375 | Aluminum, Stainless Steel, Steel | 4 | 3/8" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Linear Sleeve Bearings for Support Rail Shafts
Mount these bearings on a support rail shaft for applications requiring maximum rigidity. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
Self-Aligning with 2° Misalignment Capability
![]() |
Self-aligning bearings compensate for shaft misalignment.
PTFE Liner—PTFE-lined bearings are chemical resistant and nonabrasive. They have a ceramic coating for added corrosion resistance.
0.001" Shaft Clearance—Bearings with 0.001" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
0.0015" Shaft Clearance—Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Linear Bearings | Retaining Rings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp., ° F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Shaft Dia. | Shaft Clearance | Overall Lg. | OD | Wd. | For Housing ID | With Retaining Ring Grooves | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | Each | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" | 0.001" | 3/4" | 1/2" | 1/8" | 0.5000" to 0.5005" | Yes | 0.517" | No | 50 lb. @ 100 fpm | 935 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 000000 | 1 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/8" | 0.001" | 7/8" | 5/8" | 3/16" | 0.6250" to 0.6255" | Yes | 0.642" | No | 90 lb. @ 100 fpm | 1,600 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.001" | 1 1/4" | 7/8" | 5/16" | 0.8750" to 0.8755" | Yes | 0.969" | No | 150 lb. @ 100 fpm | 3,100 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.001" | 1 1/2" | 1 1/8" | 3/8" | 1.1250" to 1.1255" | Yes | 1.116" | No | 250 lb. @ 100 fpm | 4,600 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.001" | 1 5/8" | 1 1/4" | 7/16" | 1.2500" to 1.2505" | Yes | 1.178" | No | 350 lb. @ 100 fpm | 6,100 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.001" | 2 1/4" | 1 9/16" | 9/16" | 1.5625" to 1.5630" | Yes | 1.765" | No | 600 lb. @ 100 fpm | 11,000 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 0.0015" | 3" | 2 3/8" | 3/4" | 2.3750" to 2.3760" | Yes | 2.43" | No | 1,000 lb. @ 100 fpm | 22,000 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 000000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 0.0015" | 4" | 3" | 1" | 3.0000" to 3.0010" | Yes | 3.21" | No | 2,000 lb. @ 100 fpm | 40,000 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 000000 | 1 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 mm | 0.001" | 36 mm | 26 mm | 10.4 mm | 26.000 mm to 26.021 mm | Yes | 24.6 mm | No | 250 lb. @ 100 fpm | 3,300 | -400 | 375 | Aluminum, Stainless Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 mm | 0.001" | 45 mm | 32 mm | 10.8 mm | 32.000 mm to 32.025 mm | Yes | 31.2 mm | No | 350 lb. @ 100 fpm | 5,200 | -400 | 375 | Aluminum, Stainless Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 mm | 0.001" | 58 mm | 40 mm | 13.2 mm | 40.000 mm to 40.025 mm | Yes | 43.8 mm | No | 600 lb. @ 100 fpm | 8,400 | -400 | 375 | Aluminum, Stainless Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 mm | 0.001" | 68 mm | 47 mm | 14.2 mm | 47.000 mm to 47.025 mm | Yes | 51.8 mm | No | 900 lb. @ 100 fpm | 11,800 | -400 | 375 | Aluminum, Stainless Steel | 00000000 | 00000 | 1 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Load Mounted Linear Sleeve Bearings
With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings. All have an anodized aluminum housing that’s lightweight and stands up to corrosion. They also have a slippery, chemical-resistant PTFE liner, so there’s no need for added lubrication. Use these fixed-alignment bearings with round end-supported shafts where shaft misalignment is unlikely.
Fixed Alignment
![]() |
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia., mm | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined Ceramic-Coated 6061 Aluminum Bearings with Anodized 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.0127 | 77 | 44 | 30 | 15 | No | 300 lb. @ 100 fpm | 4,450 | -400 | 385 | Aluminum, Stainless Steel, Steel | 4 | 5 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | 0.0127 | 89 | 50 | 38.5 | 19 | No | 400 lb. @ 100 fpm | 6,650 | -400 | 385 | Aluminum, Stainless Steel, Steel | 4 | 5 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.0127 | 136 | 76 | 51.5 | 26 | No | 1,000 lb. @ 100 fpm | 16,850 | -400 | 385 | Aluminum, Stainless Steel, Steel | 4 | 8 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Load Mounted Linear Sleeve Bearings for Support Rail Shafts
With two bearings mounted in one housing, these sleeve bearings are designed to withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity. All of these bearings have a ceramic-coated aluminum housing that’s lightweight and stands up to corrosion. They also have a slippery, chemical-resistant PTFE liner, so there’s no need for lubrication. These fixed-alignment bearings are for use where shaft misalignment is unlikely.
Fixed Alignment
![]() |
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | Wd., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia., mm | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings with Ceramic-Coated 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.0127 to 0.0381 | 77 | 40 | 27.5 | 17 | 8.5 | No | 300 lb. @ 100 fpm | 4,450 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 5 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0.0127 to 0.0381 | 100 | 48 | 39 | 23 | 10 | No | 600 lb. @ 100 fpm | 10,450 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 6 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.0127 to 0.0381 | 136 | 60 | 47 | 27 | 11.5 | No | 1,000 lb. @ 100 fpm | 16,850 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 6 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 | 0.013 to 0.05 | 154 | 70 | 56 | 33 | 14 | No | 1,800 lb. @ 100 fpm | 23,700 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 8 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Electrically Insulating Linear Sleeve Bearings
These fiberglass bearings are lightweight, nonmagnetic, and won’t conduct electricity. Bearings are for use with round end-supported shafts. All have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
Fixed Alignment
![]() |
0.001" Shaft Clearance—Bearings with 0.001" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Linear Bearings | Retaining Rings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp., ° F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Shaft Dia. | Shaft Clearance | Overall Lg. | OD | For Housing ID | With Retaining Ring Grooves | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined Fiberglass Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 0.001" | 1 1/4" | 7/8" | 0.8750" to 0.8755" | Yes | 0.975" | No | 150 lb. @ 100 fpm | 3,100 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 000000 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 0.001" | 1 1/2" | 1 1/8" | 1.1250" to 1.1255" | Yes | 1.116" | No | 250 lb. @ 100 fpm | 4,600 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 0.001" | 1 5/8" | 1 1/4" | 1.2500" to 1.2505" | Yes | 1.178" | No | 350 lb. @ 100 fpm | 6,100 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" | 0.001" | 2 1/4" | 1 9/16" | 1.5625" to 1.5630" | Yes | 1.765" | No | 600 lb. @ 100 fpm | 11,000 | -400 | 375 | Aluminum, Stainless Steel | 0000000 | 00000 | 0000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||