Use the rear hitch on these trailers to pull up to five trailers at the same time. They have pneumatic wheels for a smooth, cushioned ride over the roughest surfaces, such as gravel.

Tow large quantities of loose material around a facility, then flip the rear panel up for easy dumping. The trailer has a smooth interior for easy cleaning. They have pneumatic wheels for a cushioned ride over the roughest surfaces, such as gravel.

These wagons provide a smooth and gentle ride for transporting fragile loads. They roll on pneumatic wheels that cushion the load over rough surfaces and obstructions. The wheels are also quieter and absorb impact better than steel wagons. These wagons have a two-piece handle that steers the front wheels independently for better stability. Remove the T-end of the handle for towing applications.

Ease the strain of pulling heavy carts, trailers, and hoppers. Unlike a manual trailer mover, these tuggers don't require exerting yourself as you tug your load across your facility. Instead, use the simple controls on the handle: forward, reverse, and a horn. To prevent accidents, these tuggers will stop automatically if you take one of your hands off the handle. The wheels are filled with solid foam, so they won’t go flat.

Use the included pin hitch to attach these tuggers to any pin-compatible connector.

Make moving and positioning trailers an easier job. The long handle on these movers gives you the leverage you need to roll the trailer. It has a removable hitch ball for connecting to a trailer. The wheels are flat free for easy rolling. Vertical capacity (also known as tongue weight) represents the weight of the load on the drawbar ring or hitch ball.

Position these dollies under a load, then depress the removable handle to lift it. A safety latch locks the dollies in the raised position; a handle-activated lock release lowers the load. The platform and removable handle are plastic coated for a nonskid, nonmarring contact surface. Four swivel casters make these dollies easier to maneuver. Their solid rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces.

They are made of steel to handle tough environments. All have four swivel casters for easy maneuvering.

The combination of an offset handle and a V-shaped cradle make moving large, long items a one-person job. Their rubber pneumatic wheels provide a cushioned ride over the roughest surfaces, such as gravel.

A removable handle and four swivel casters make these dollies easy to push, pull, and maneuver along walls and aisles. They can be used with round drums as well as square cartons and crates.

Tow up to three of these tough, sturdy trucks at the same time with the included tow bar and hitch coupler. Tilt them to empty. They have a seamless body that resists many chemicals and can be cleaned with high pressure water or steam. The steel side rails provide added support. Trucks have two swivel casters and two-axle mounted wheels for good steering control, with nonmarking polyurethane wheels that are abrasion-resistant and shock-absorbing. Use them on all floor types, including areas with debris.

Note: Don't exceed 2,100 lbs. total capacity for all three trucks.

Lids—Lids (sold separately) fold open for loading or unloading.

A rustproof aluminum platform and open corners for easy drainage make these dollies a good fit for food-service applications, plus they meet NSF/ANSI standards for food equipment. Platforms are flush in front for easy loading but lipped on three sides to keep items from sliding off. Dollies have two swivel and two rigid casters with nonmarking, polyurethane tread-on-core wheels that absorb shock on rough floors and in areas with debris.

Add wheels to a door, partition, or piece of sheet stock to make moving a one-person job. The cradle adjusts to accommodate a variety of load widths and is carpeted for a nonmarring contact surface. Rubber semi-pneumatic wheels provide a cushioned ride over rough surfaces and won't go flat.