About External and Internal Grip Pullers
More
Reversible Jaw External/Internal Grip Puller Sets
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | Crossbar Oil-Seal Puller Hook 2-Jaw Jaw Bar 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer Three Sets of Jaws (2 3/8", 4 1/8", and 6 1/2" Reaches) | 0000000 | 0000000 |
| Steel | 2-Jaw Bridge-Style Internal Grip Puller (For 7/8"-2" ID; 1" Reach) 2-Jaw External Grip Puller—5-ton Capacity (For Up To 6" OD; 5 1/2" Reach) 2-Jaw External Grip Puller—7-ton Capacity (For Up To 9" OD; 5" Reach) 2-Jaw Internal Grip Puller (For 7/8"-2 1/8" ID; 1" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 11" OD; 8 3/4" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (1/2"-4 1/4" Spread) Bearing Separator (1/8"-1 7/8" Spread) Face-Grip Puller (For 1 1/2"-4 1/4" OD) with 5 1/2” Long Forcing Screw Face-Grip Puller (For 2"-7 3/4" OD) with 11 5/8” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller | 0000000 | 00000000 |
| Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 000000 |
Reversible Jaw External/Internal Grip Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | 2-Jaw Internal Grip Puller (For 1/2"-1 1/2" ID; 3/4" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—5-ton Capacity (For Up To 7" OD; 3 1/4" Reach) 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (1/2"-4 1/4" Spread) Bearing Separator (1/8"-1 7/8" Spread) Face-Grip Puller (For 1 1/2"-4 1/2" OD) with 13” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Two Sets of Long-Reach Jaws (Three Jaws for 5-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) | 00000000 | 000000000 |
Reversible Jaw External/Internal Grip Puller Sets for Tight Spaces
A flat profile and straight jaws fit in spots where other pullers do not. This puller comes with four pairs of different-sized jaws for use in external and internal pulling jobs.
To grip objects on the outside, attach jaws with tips facing in. To grip objects from inside, attach jaws with tips facing out.
| Capacity, tons | Puller Material | Forcing Screw Material | Includes | Each | |
| 5 | Steel | Steel | Crossbar Forcing Screw (7/8"-9" Thread Size; 8" Long) Four Sets of Jaws (5", 6", 6" Tapered Tip, and 8" Reach) Two Jaw-Mounting Screws | 000000 | 000000000 |
| Optional Straight-Tip Jaws (25-ton Capacity; 6" Reach) | 0000000 | Pair | 0000000 |
| Optional Straight-Tip Jaws (25-ton Capacity; 10" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws (5-ton Capacity; 5" Reach) | 0000000 | Pair | 000000 |
| Replacement Crossbar (5-ton Capacity; Includes: Forcing Screw) | 0000000 | Each | 000000 |
| Optional Crossbar (25-ton Capacity; Includes: Forcing Screw) | 0000000 | Each | 000000 |
| Replacement Tapered-Tip Jaws (5-ton Capacity; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws (5-ton Capacity; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws (5-ton Capacity; 8" Reach) | 0000000 | Pair | 000000 |
Quick-Hold External Grip Puller Sets
Each puller has a cage around the jaws that keeps them in place for a quick job of gripping bearings and pulleys. Use them to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
| Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Includes | Each | |
| 5-20 | Steel | Iron | Steel | 2-Jaw Puller (For 1/2"-7" OD) 3-Jaw Puller (For 1"-14" OD) 3-Jaw Puller (For 1/2"-5" OD) 3-Jaw Puller (For 1/2"-7" OD) Forcing Screws T-Handles | 0000000 | 0000000 |
High-Force External Grip Puller Sets
Move the immovable—this puller set includes a hand pump and hydraulic cylinder so you can create up to 17 1/2 tons of pulling force.
| Capacity, tons | Puller Material | Includes | Each | |
| 17 1/2 | Steel | 3-Jaw External-Grip Hydraulic Puller (For Up To 20" OD; 11 1/2" Reach) 3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller Adjusting Screw Bearing Separator (1/2"-9" Spread) Crank Handle Face-Grip Hydraulic Puller with End Caps (For 5 3/4"-11 3/4" OD; 18 1/2" Reach) Hose Half Coupler with Dust Cap Hydraulic Cylinder (2" Stroke) Hydraulic Hose - 6 Feet Internal-Grip Jaw Attachment (For 1 1/2"-9" OD; 4" Reach) for 3-Jaw External-Grip Hydraulic Puller Pair of Legs (22 1/2" Reach) for Face-Grip Puller Pressure Gauge Single Stage Hydraulic Hand Pump Assembly Tee Adapter Three Threaded Adapters Two Pushing Adapters Wood Case | 0000000 | 000000000 |
Hub and Fan Blade External Grip Puller Sets
Remove press-fit hubs and fan blades in a variety of sizes. Set includes a hub adapter and long jaws so you can grip larger components.
For hub-mounted components such as blower wheels, secure the puller with the included set screws. For fan blades, attach the puller with the removable jaws, hooking a jaw around each fan blade to secure.
| Puller Material | Jaw Material | Forcing Screw Material | Includes | Each | |
| Aluminum | Steel | Steel | 4-Jaw Puller (For 3"-6" OD; 1 1/2" Reach; 1/4" Width × 1" Long Tip) Forcing Screw (1/2"-20 Thread Size; 9" Long) Four Long Jaws (For 3"-8 1/2" OD; 2 5/8" Reach) Hub Adapter (For 2 3/4" OD) Three Set Screws Plastic Case | 00000000 | 000000 |
Bearing/V-Belt Pulley Separator Sets
Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included with all sets) to remove them from the shaft.
Sets with 5 separators do not include face-grip pullers. Select a face-grip puller with a leg thread size that matches the thread size of your separator.
| Thread Size  | Material | Includes | Each | |
| 3/8"-16 5/8"-18 15/16"-18 | Steel | 5 Separators (1 3/4"-5 3/4" Spread; 1/2"-4 1/4" Spread; 1/2"-8 7/8" Spread; 1/4"-13/16" Spread; 1/8"-1 7/8" Spread) Plastic Case | 0000000 | 0000000 |
Expanding-Collar Internal Grip Puller Sets
Get a grip on objects with blind holes—this puller set has a variety of expanding collets that secure bearings and bushings from inside.
Use the pin and pin adapter to expand the collet inside the object you’re pulling. When the collet is secure, use the bridge with the forcing screw and nut to apply force to the object you’re removing. When you need additional force to extract hard-to-remove objects, use the bridge with the slide hammer. Forcefully slide the weight to the top of the slide bar to yank hard on the object you’re pulling.
| For Shaft Dia. | Pin Dia. | Puller Material | Includes | Each | |
| 5/16"-1 1/4" | 5/32", 3/16", 9/32", 13/32", 1/2" | Steel | Five Pullers Slide Hammer Rod (17" Long) Five Pins Pin Adapter 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) Bridge (6 3/4" Reach; 6" Width) Forcing Screw Nut (3/4"-16 Thread Size) Forcing Screws (5/8"-18 and 3/4"-16 Thread Sizes; 12 11/32" Long) Plastic Case | 0000000 | 0000000 |
Forcing Screws for Pullers
Make your old puller work like new by replacing worn forcing screws.
| Thread Size | Lg. | Material | Head Style | Each | |
| 5/16"-24 | 4 1/8" | Steel | T-Handle | 000000 | 000000 |
| 5/16"-24 | 5 1/2" | Steel | T-Handle | 00000000 | 00000 |
| 3/8"-24 | 7" | Steel | T-Handle | 00000000 | 00000 |
| 1/2"-20 | 9" | Steel | Hex | 00000000 | 0000 |
| 9/16"-16 | 10 1/8" | Steel | Hex | 00000000 | 00000 |
| 9/16"-20 | 6 7/8" | Steel | Hex | 0000000 | 00000 |
| 5/8"-14 | 12 3/4" | Steel | Hex | 00000000 | 00000 |
| 5/8"-18 | 5 1/2" | Steel | Hex | 0000000 | 00000 |
| 5/8"-18 | 13" | Steel | Hex | 0000000 | 00000 |
| 11/16"-18 | 9" | Steel | Hex | 0000000 | 00000 |
| 3/4"-14 | 16 1/4" | Steel | Hex | 00000000 | 00000 |
| 3/4"-14 | 19 1/4" | Steel | Hex | 00000000 | 00000 |
| 7/8"-9 | 8" | Steel | Hex | 0000000 | 000000 |
| 1"-14 | 13 3/4" | Steel | Hex | 0000000 | 000000 |
| 1 1/8"-14 | 26" | Steel | Hex | 00000000 | 000000 |
| 1 1/4"-12 | 16" | Steel | Hex | 0000000 | 000000 |
| 1 1/4"-14 | 31 1/2" | Steel | Hex | 00000000 | 000000 |
| 1 1/2"-6 | 14" | Steel | Hex | 0000000 | 000000 |
Threaded Adapters for Pullers
Use adapters on the ends of forcing screws and face-grip puller legs when pulling shafts, bearing caps, and pinions.
| Thread Size | Gender | Each | |
| 1/4"-20 × 5/8"-18 | Male × Female | 000000 | 000000 |
| 5/16"-18 × 5/8"-18 | Male × Female | 000000 | 00000 |
| 3/8"-16 × 5/8"-18 | Male × Female | 000000 | 00000 |
| 3/8"-24 × 5/8"-18 | Male × Female | 000000 | 00000 |
| 7/16"-14 × 5/8"-18 | Male × Female | 000000 | 00000 |
| 7/16"-20 × 5/8"-18 | Male × Female | 000000 | 00000 |
| 1/2"-13 × 5/8"-18 | Male × Female | 000000 | 00000 |
| 1/2"-20 × 5/8"-18 | Male × Female | 000000 | 00000 |
| 5/8"-18 × 1"-14 | Male × Female | 000000 | 00000 |
Step-Plate Adapters for Pullers
Pull bearings, gears, and other parts from hollow shafts and housings. Place one of these adapters in the end of your hollow shaft to provide a surface for the forcing screw to push against.
For technical drawings and 3-D models, click on a part number.
Adjustable Face-Grip Puller Sets
Also known as steering wheel and flywheel pullers, you can change the bolt configuration on these pullers to fit a variety of tapered hole patterns.
| Puller Material | Includes | Each | |
| Steel | Adjustable Face-Grip Puller (For Up To 3" OD; 3 1/8" Reach) with 4 1/2” Long Forcing Screw Six Cap Screws (2 of Each: 3/8"-16 x 4" Lg., 5/16"-18 x 4" Lg., and 5/16"-24 x 4" Lg.) Two Washers | 00000000 | 000000 |
| Steel | Adjustable Face-Grip Small-Hole Puller (For Up To 3 1/4" OD; 4 3/8" Reach) with 4 3/4" Long Forcing Screw Adjustable Face-Grip Large-Hole Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw 12 Flange-Head Cap Screws (3 of Each: 3/8"-16 × 3 1/2" Lg., 3/8"-24 × 3" Lg., 5/16"-18 × 3 1/2" Lg., and 5/16"-24 × 3 1/2" Lg.) | 00000000 | 000000 |
Corkscrew Puller Sets
Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors and packing pullers, they are often used to remove packing material from pump and valve seals.
Flexible-shaft pullers bend to access material in tight spots.
| Number of Pieces | Includes | Grip Style | Tip Type | Handle Material | Specifications Met | Each | |
Flexible Shaft | |||||||
|---|---|---|---|---|---|---|---|
| 3 | 7 1/2" Lg. Steel Puller with 1/4" Dia. Corkscrew Tip and T-Handle 10 3/4" Lg. Steel Puller with 5/16" Dia. Corkscrew Tip and T-Handle 14 1/2" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle | Plain | Fixed | Steel | Fed. Spec. GGG-E-950A | 0000000 | 000000 |
| 8 | 7" Lg. Steel Puller with 3/16" Dia. Corkscrew Tip and T-Handle 7 1/2" Lg. Steel Puller with 1/4" Dia. Corkscrew Tip and T-Handle 10 3/4" Lg. Steel Puller with 5/16" Dia. Corkscrew Tip and T-Handle 14 1/2" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle 18" Lg. Steel Puller with 1/2" Dia. Corkscrew Tip and T-Handle 22" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle 22" Lg. Steel Puller with 5/8" Dia. Corkscrew Tip and T-Handle 30" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle | Plain | Fixed | Steel | Fed. Spec. GGG-E-950A | 0000000 | 000000 |
Rigid Shaft | |||||||
| 4 | 6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips | Plain | Fixed | Steel | __ | 0000000 | 000000 |
| 6 | 6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 18" Lg. Steel Puller with Corkscrew Tip and Loop Handle 8" Lg. Steel Pick with 90° Angle Tip and Loop Handle 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips | Plain | Fixed | Steel | __ | 0000000 | 000000 |
| 8 | 6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 18" Lg. Steel Puller with Corkscrew Tip and Loop Handle 20" Lg. Steel Puller with Corkscrew Tip and Loop Handle 8" Lg. Steel Pick with 90° Angle Tip and Loop Handle 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips 14" Lg. Steel Packing Installation Tool with Blunt Tip and Offset Handle | Plain | Fixed | Steel | __ | 0000000 | 000000 |
| 10 | 6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 18" Lg. Steel Puller with Corkscrew Tip and Loop Handle 20" Lg. Steel Puller with Corkscrew Tip and Loop Handle 8" Lg. Steel Pick with 90° Angle Tip and Loop Handle 10" Lg. Steel Pick with 90° Angle Tip and Loop Handle 10" Lg. Steel Pick with 90° Angle × 45° Angle Tips 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips 14" Lg. Steel Packing Installation Tool with Blunt Tip and Offset Handle | Plain | Fixed | Steel | __ | 0000000 | 000000 |
Changeable-Tip Corkscrew Puller Sets
Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style. Also known as packing extractors and packing pullers, they are often used to extract packing material from pump and valve seals.
Sets with pry bars give more leverage for pulling and packing.
Corkscrew tips twist into material for a firm hold.
Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.
Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.
Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.
| Number of Pieces | Includes | Tip Mounting Thread Size | Grip Style | Handle Material | Container Type | Each | |
| 6 | Three Steel Rigid Shafts with Loop Handles (6", 10", and 14" Lg.) Three Steel Corkscrew Tips (1/4", 5/16", and 3/8" Dia.) | 8-32, 1/4"-20 | Plain | Steel | Cardboard Box | 00000000 | 000000 |
| 6 | Three Steel Flexible Shafts with T-Handles (8", 11 1/12", and 15" Lg.) Three Steel Corkscrew Tips (1/4", 5/16", and 3/8" Dia.) | 8-32, 1/4"-20 | Plain | Steel | Cardboard Box | 00000000 | 00000 |
| 8 | Two Steel Flexible Shafts with T-Handles (11 3/4" Lg.) Four Steel Corkscrew Tips (1/4" Dia.) Wrench Pry Bar | 8-32 | Plain | Steel | Plastic Box | 00000000 | 000000 |
| 14 | Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Four Steel Flexible Shafts with T-Handles (Two each of 7" and 11" Lg.) Six Steel Corkscrew Tips (Three each of 1/4" and 5/16" Dia.) Wrench | 8-32, 1/4"-20 | Plain | Steel | Plastic Box | 0000000 | 000000 |
| 14 | Four Steel Flexible Shafts with T-Handles (Two each of 11 1/2" and 14 3/4" Lg.) Eight Steel Corkscrew Tips (Four each of 5/16" and 3/8" Dia.) Wrench Pry Bar | 1/4"-20 | Plain | Steel | Plastic Box | 00000000 | 000000 |
| 22 | Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Six Steel Flexible Shafts with T-Handles (Two each of 7", 11", and 14" Lg.) Nine Steel Corkscrew Tips (Three each of 1/4", 5/16", and 3/8" Dia.) Three Steel Wood Screw Tips (One each of 3/16", 1/4", and 5/16" Thread Size) Wrench | 8-32, 1/4"-20 | Plain | Steel | Plastic Box | 0000000 | 000000 |
| 49 | Two 6" Lg. Steel 20° Angle Picks with Loop Handles Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Six Steel Rigid Shafts with Loop Handles (Two each of 6", 10", and 14" Lg.) Six Steel Flexible Shafts with T-Handles (Two each of 7", 11", and 14" Lg.) 15 Steel Corkscrew Tips (Five each of 1/4", 5/16", and 3/8" Dia.) Three Steel Wood Screw Tips (One each of 3/16", 1/4", and 5/16" Thread Size) Six Steel Machine Screw Tips (One each of 8-32, 10-32, 10-24, 1/4"-20, 1/4"-28, and 5/16"-18 Thread Size) Four Steel Brush Tips (One each of 7/32", 5/16", 5/8", and 11/16" Dia.) Two Brush Tip Adapters Knife Wrench | 8-32, 1/4"-20 | Plain | Steel | Plastic Box | 0000000 | 000000 |
