McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    434 Products

    Timing Belt Pulleys

    Image of Product. Front orientation. Timing Belt Drive Pulleys. Timing Belt Pulleys, Plain Bore.

    Plain Bore

    Image of Product. Front orientation. Timing Belt Drive Pulleys. Timing Belt Pulleys, Bushing Bore.

    Bushing Bore

    Image of Attribute. Front orientation. Contains Annotated, Border. Timing Belt Pulleys.
    Keep your drive system in sync. Trapezoidal teeth mesh with matching belts to synchronize motion. With the original tooth profile, these pulleys handle enough torque for most applications. If you need high torque or precise starts and stops, consider curved tooth profiles, such as GT and HTD pulleys.
    Steel and Iron—Strong but best for dry environments since moisture will cause them to rust.
    Plain Bore—Do it your way—machine the bore to your exact shaft size or add a set screw or keyway.
    Bushing Bore—Quickly swap or service parts in tight spaces—no press-fitting or special tools required. Mount a bushing (sold separately) on your shaft and slide the pulley over it. As you tighten the included set screws, the bushing grips the shaft and draws it into the pulley, creating a final hold that is more secure than with set screws alone.
    For
    Bushing
    For Max.
    Belt Wd.
    Pitch
    No. of
    Teeth
    Bore
    Type
    For Shaft
    Dia.
    Type
    Trade
    No.
    OD
    No. of
    Flanges
    Hub
    Type
    Each
    For H Trade Size
     
    Steel
    1"0.500"14Plain5/8"2.461"2Standard0000000000000
    1"0.500"14BushingQuick Disconnect (QD)JA2.43"20000000000000
    1"0.500"16Plain5/8"2.779"2Standard000000000000
    1"0.500"16BushingQuick Disconnect (QD)JA2.779"20000000000000
    1"0.500"18Plain5/8"3.097"2Standard000000000000
    1"0.500"18BushingQuick Disconnect (QD)SH3.125"20000000000000
    1"0.500"20Plain5/8"3.415"2Standard000000000000
    1"0.500"20BushingQuick Disconnect (QD)SH3.415"20000000000000
    1"0.500"21Plain3/4"3.574"2Standard0000000000000
    1"0.500"22Plain3/4"3.733"2Standard0000000000000
    1"0.500"22BushingQuick Disconnect (QD)SDS3.733"20000000000000
    1"0.500"24Plain3/4"4.051"2Standard0000000000000
    1"0.500"24BushingQuick Disconnect (QD)SDS4.051"20000000000000
    1"0.500"26Plain3/4"4.369"2Standard0000000000000
    1"0.500"26BushingQuick Disconnect (QD)SDS4.369"200000000000000
    1"0.500"28Plain3/4"4.687"2Standard0000000000000
    1"0.500"28BushingQuick Disconnect (QD)SDS4.697"200000000000000
    1 1/2"0.500"14Plain3/4"2.461"2Standard0000000000000
    1 1/2"0.500"14BushingQuick Disconnect (QD)JA3"20000000000000
    1 1/2"0.500"16Plain3/4"2.779"2Standard0000000000000
    1 1/2"0.500"16BushingQuick Disconnect (QD)JA2.779"20000000000000
    1 1/2"0.500"18Plain3/4"3.097"2Standard0000000000000
    1 1/2"0.500"18BushingQuick Disconnect (QD)SH3.125"20000000000000
    1 1/2"0.500"19Plain3/4"3.256"2Standard0000000000000
    1 1/2"0.500"20Plain3/4"3.415"2Standard0000000000000
    1 1/2"0.500"20BushingQuick Disconnect (QD)SH3.415"20000000000000
    1 1/2"0.500"21Plain3/4"3.574"2Standard0000000000000
    1 1/2"0.500"22Plain3/4"3.733"2Standard00000000000000
    1 1/2"0.500"22BushingQuick Disconnect (QD)SD3.79"200000000000000
    1 1/2"0.500"24Plain3/4"4.051"2Standard00000000000000
    1 1/2"0.500"24BushingQuick Disconnect (QD)SD4.051"200000000000000
    1 1/2"0.500"26Plain3/4"4.369"2Standard00000000000000
    1 1/2"0.500"26BushingQuick Disconnect (QD)SD4.369"200000000000000
    1 1/2"0.500"28BushingQuick Disconnect (QD)SD4.697"200000000000000
    2"0.500"14Plain3/4"2.461"2Standard00000000000000
    2"0.500"14BushingQuick Disconnect (QD)JA2.5"20000000000000
    2"0.500"16Plain3/4"2.779"2Standard00000000000000
    2"0.500"16BushingQuick Disconnect (QD)JA2.78"20000000000000
    2"0.500"18Plain3/4"3.097"2Standard00000000000000
    2"0.500"18BushingQuick Disconnect (QD)SH3.1"200000000000000
    2"0.500"19Plain3/4"3.256"2Standard00000000000000
    2"0.500"20Plain3/4"3.415"2Standard00000000000000
    2"0.500"22Plain1"3.733"2Standard00000000000000
    2"0.500"24Plain1"4.051"2Standard00000000000000
    2"0.500"26Plain1"4.369"2Standard00000000000000
    3"0.500"16Plain3/4"2.779"2Standard00000000000000
     
    Iron
    1"0.500"30BushingQuick Disconnect (QD)SD5.005"200000000000000
    1"0.500"32BushingQuick Disconnect (QD)SK5.323"20000000000000
    1"0.500"36BushingQuick Disconnect (QD)SK5.959"200000000000000
    1"0.500"40BushingQuick Disconnect (QD)SK6.595"200000000000000
    1"0.500"48BushingQuick Disconnect (QD)SK7.867"200000000000000
    1"0.500"60BushingQuick Disconnect (QD)SF9.549"00000000000000
    1"0.500"120BushingQuick Disconnect (QD)SF18.955"00000000000000
    1 1/2"0.500"30BushingQuick Disconnect (QD)SD5.005"200000000000000
    1 1/2"0.500"32BushingQuick Disconnect (QD)SK5.323"20000000000000
    1 1/2"0.500"36BushingQuick Disconnect (QD)SK5.73"200000000000000
    1 1/2"0.500"40BushingQuick Disconnect (QD)SK6.595"200000000000000
    1 1/2"0.500"48BushingQuick Disconnect (QD)SK7.867"200000000000000
    1 1/2"0.500"60BushingQuick Disconnect (QD)SF9.549"00000000000000
    1 1/2"0.500"120BushingQuick Disconnect (QD)SF18.955"00000000000000
    2"0.500"20BushingQuick Disconnect (QD)SH3.42"200000000000000
    2"0.500"22BushingQuick Disconnect (QD)SD3.735"200000000000000
    2"0.500"24BushingQuick Disconnect (QD)SD4.05"200000000000000
    2"0.500"26BushingQuick Disconnect (QD)SD4.369"200000000000000
    2"0.500"28BushingQuick Disconnect (QD)SD4.687"200000000000000
    2"0.500"30BushingQuick Disconnect (QD)SD5"200000000000000
    2"0.500"32BushingQuick Disconnect (QD)SK5.32"20000000000000
    2"0.500"36BushingQuick Disconnect (QD)SK5.959"200000000000000
    2"0.500"40BushingQuick Disconnect (QD)SK6.6"200000000000000
    2"0.500"48BushingQuick Disconnect (QD)SF8.016"200000000000000
    2"0.500"60BushingQuick Disconnect (QD)SF9.495"00000000000000
    2"0.500"120BushingQuick Disconnect (QD)E19.045"00000000000000
     
    Bushings

    Timing Belt Idler Pulleys

    Image of Product. Front orientation. Timing Belt Idler Pulleys. Timing Belt Idler Pulleys.
    Image of Attribute. Front orientation. Contains Annotated, Border. Timing Belt Idler Pulleys.
    Reduce vibration and wear on your timing belt with idler pulleys that maintain constant tension. Their trapezoidal teeth mesh with matching grooves on your timing belt, pressing against the belt to take up slack. Plus, they rotate freely on bearings to keep the belt moving smoothly. Idler pulleys are often used with belt tensioners.
    Steel and Iron—Strong, but best for dry environments since moisture will cause them to rust.
    For Max.
    Belt Wd.
    No. of
    Teeth
    Pitch
    For Shaft
    Dia.
    OD
    Bearing
    Type
    Each
    For H Trade Size
     
    Steel
    1"160.5"1"2 1/2"Roller
    0000000000000
    2"160.5"1"2 1/2"Roller
    000000000000
     
    Iron
    3"180.5"1"2.8"Roller
    0000000000000
     

    Timing Belts

    Image of Product. Front orientation. Contains Inset. Timing Belts. Timing Belts.
    Image of Attribute. Front orientation. Contains Annotated, Border. Trapezoidal Teeth.
    Keep your drive system in sync. Trapezoidal teeth mesh with matching pulleys to transmit power without slipping. With the original tooth profile, these timing belts handle enough torque and synchronization for most applications. If you need high torque or precise starts and stops, consider curved tooth profiles, such as GT and HTD belts.
    Neoprene—Durable and weather resistant, but lose elasticity if exposed to oil and fuel. These belts are reinforced, so they're strong enough to transmit power without stretching. Plus, nylon-coated teeth minimize friction and protect the surface from wear.
    Abrasion-Resistant Urethane Rubber—Won’t break down or create dust while they run. Plus, they last longer than neoprene belts. Aramid or steel reinforcements provide very high strength and low stretch.
    High-Temperature Silicone Rubber—The best for extreme heat, silicone timing belts resist sterilizing temperatures that would degrade other rubber. All are reinforced with aramid for very high strength and low stretch.
    Wd.
    Outer
    Circle
    No. of
    Teeth
    Pitch
    Reinforcement
    Material
    Tooth
    Finish
    Temp. Range,
    ° F
    Belt Trade
    No.
    Each
    Neoprene
     
    H Trade Size
    3/4"21"420.500"FiberglassNylon Coated-22 to 212210H0750000000000000
    3/4"23"460.500"FiberglassNylon Coated-22 to 212230H0750000000000000
    3/4"24"480.500"FiberglassNylon Coated-22 to 212240H075000000000000
    3/4"27"540.500"FiberglassNylon Coated-22 to 212270H0750000000000000
    3/4"30"600.500"FiberglassNylon Coated-22 to 212300H0750000000000000
    3/4"32"640.500"FiberglassNylon Coated-22 to 212320H075000000000000
    3/4"33"660.500"FiberglassNylon Coated-22 to 212330H0750000000000000
    3/4"36"720.500"FiberglassNylon Coated-22 to 212360H0750000000000000
    3/4"37"740.500"FiberglassNylon Coated-22 to 212370H0750000000000000
    3/4"39"780.500"FiberglassNylon Coated-22 to 212390H075000000000000
    3/4"42"840.500"FiberglassNylon Coated-22 to 212420H075000000000000
    3/4"45"900.500"FiberglassNylon Coated-22 to 212450H0750000000000000
    3/4"48"960.500"FiberglassNylon Coated-22 to 212480H075000000000000
    3/4"51"1020.500"FiberglassNylon Coated-22 to 212510H075000000000000
    3/4"54"1080.500"FiberglassNylon Coated-22 to 212540H075000000000000
    3/4"57"1140.500"FiberglassNylon Coated-22 to 212570H0750000000000000
    3/4"60"1200.500"FiberglassNylon Coated-22 to 212600H075000000000000
    3/4"63"1260.500"FiberglassNylon Coated-22 to 212630H075000000000000
    3/4"66"1320.500"FiberglassNylon Coated-22 to 212660H075000000000000
    3/4"70"1400.500"FiberglassNylon Coated-22 to 212700H075000000000000
    3/4"75"1500.500"FiberglassNylon Coated-22 to 212750H075000000000000
    3/4"80"1600.500"FiberglassNylon Coated-22 to 212800H075000000000000
    3/4"85"1700.500"FiberglassNylon Coated-22 to 212850H0750000000000000
    3/4"90"1800.500"FiberglassNylon Coated-22 to 212900H0750000000000000
    3/4"96"1920.500"FiberglassNylon Coated-22 to 212960H07500000000000000
    3/4"100"2000.500"FiberglassNylon Coated-22 to 2121000H07500000000000000
    3/4"110"2200.500"FiberglassNylon Coated-22 to 2121100H07500000000000000
    3/4"125"2500.500"FiberglassNylon Coated-22 to 2121250H0750000000000000
    3/4"140"2800.500"FiberglassNylon Coated-22 to 2121400H07500000000000000
    3/4"170"3400.500"FiberglassNylon Coated-22 to 2121700H07500000000000000
    1"21"420.500"FiberglassNylon Coated-22 to 212210H1000000000000000
    1"22"440.500"FiberglassNylon Coated-22 to 212220H1000000000000000
    1"23"460.500"FiberglassNylon Coated-22 to 212230H1000000000000000
    1"24"480.500"FiberglassNylon Coated-22 to 212240H1000000000000000
    1"27"540.500"FiberglassNylon Coated-22 to 212270H1000000000000000
    1"30"600.500"FiberglassNylon Coated-22 to 212300H1000000000000000
    1"32"640.500"FiberglassNylon Coated-22 to 212320H1000000000000000
    1"33"660.500"FiberglassNylon Coated-22 to 212330H1000000000000000
    1"34"680.500"FiberglassNylon Coated-22 to 212340H1000000000000000
    1"36"720.500"FiberglassNylon Coated-22 to 212360H1000000000000000
    1"37"740.500"FiberglassNylon Coated-22 to 212370H1000000000000000
    1"39"780.500"FiberglassNylon Coated-22 to 212390H1000000000000000
    1"40"800.500"FiberglassNylon Coated-22 to 212400H1000000000000000
    1"42"840.500"FiberglassNylon Coated-22 to 212420H1000000000000000
    1"45"900.500"FiberglassNylon Coated-22 to 212450H1000000000000000
    1"48"960.500"FiberglassNylon Coated-22 to 212480H1000000000000000
    1"51"1020.500"FiberglassNylon Coated-22 to 212510H100000000000000
    1"54"1080.500"FiberglassNylon Coated-22 to 212540H1000000000000000
    1"56"1120.500"FiberglassNylon Coated-22 to 212560H1000000000000000
    1"57"1140.500"FiberglassNylon Coated-22 to 212570H1000000000000000
    1"60"1200.500"FiberglassNylon Coated-22 to 212600H1000000000000000
    1"63"1260.500"FiberglassNylon Coated-22 to 212630H1000000000000000
    1"66"1320.500"FiberglassNylon Coated-22 to 212660H1000000000000000
    1"70"1400.500"FiberglassNylon Coated-22 to 212700H1000000000000000
    1"75"1500.500"FiberglassNylon Coated-22 to 212750H1000000000000000
    1"80"1600.500"FiberglassNylon Coated-22 to 212800H10000000000000000
    1"85"1700.500"FiberglassNylon Coated-22 to 212850H10000000000000000
    1"90"1800.500"FiberglassNylon Coated-22 to 212900H10000000000000000
    1"96"1920.500"FiberglassNylon Coated-22 to 212960H10000000000000000
    1"100"2000.500"FiberglassNylon Coated-22 to 2121000H10000000000000000
    1"110"2200.500"FiberglassNylon Coated-22 to 2121100H10000000000000000
    1"125"2500.500"FiberglassNylon Coated-22 to 2121250H10000000000000000
    1"140"2800.500"FiberglassNylon Coated-22 to 2121400H10000000000000000
    1"170"3400.500"FiberglassNylon Coated-22 to 2121700H1000000000000000
    1 1/2"21"420.500"FiberglassNylon Coated-22 to 212210H1500000000000000
    1 1/2"22"440.500"FiberglassNylon Coated-22 to 212220H1500000000000000
    1 1/2"23"460.500"FiberglassNylon Coated-22 to 212230H1500000000000000
    1 1/2"24"480.500"FiberglassNylon Coated-22 to 212240H1500000000000000
    1 1/2"27"540.500"FiberglassNylon Coated-22 to 212270H1500000000000000
    1 1/2"30"600.500"FiberglassNylon Coated-22 to 212300H1500000000000000
    1 1/2"32"640.500"FiberglassNylon Coated-22 to 212320H1500000000000000
    1 1/2"33"660.500"FiberglassNylon Coated-22 to 212330H1500000000000000
    1 1/2"34"680.500"FiberglassNylon Coated-22 to 212340H1500000000000000
    1 1/2"36"720.500"FiberglassNylon Coated-22 to 212360H1500000000000000
    1 1/2"37"740.500"FiberglassNylon Coated-22 to 212370H1500000000000000
    1 1/2"39"780.500"FiberglassNylon Coated-22 to 212390H1500000000000000
    1 1/2"40"800.500"FiberglassNylon Coated-22 to 212400H1500000000000000
    1 1/2"42"840.500"FiberglassNylon Coated-22 to 212420H1500000000000000
    1 1/2"45"900.500"FiberglassNylon Coated-22 to 212450H1500000000000000
    1 1/2"48"960.500"FiberglassNylon Coated-22 to 212480H15000000000000000
    1 1/2"51"1020.500"FiberglassNylon Coated-22 to 212510H150000000000000
    1 1/2"54"1080.500"FiberglassNylon Coated-22 to 212540H15000000000000000
    1 1/2"56"1120.500"FiberglassNylon Coated-22 to 212560H15000000000000000
    1 1/2"57"1140.500"FiberglassNylon Coated-22 to 212570H15000000000000000
    1 1/2"60"1200.500"FiberglassNylon Coated-22 to 212600H15000000000000000
    1 1/2"63"1260.500"FiberglassNylon Coated-22 to 212630H15000000000000000
    1 1/2"66"1320.500"FiberglassNylon Coated-22 to 212660H15000000000000000
    1 1/2"70"1400.500"FiberglassNylon Coated-22 to 212700H15000000000000000
    1 1/2"75"1500.500"FiberglassNylon Coated-22 to 212750H15000000000000000
    1 1/2"80"1600.500"FiberglassNylon Coated-22 to 212800H15000000000000000
    1 1/2"85"1700.500"FiberglassNylon Coated-22 to 212850H15000000000000000
    1 1/2"90"1800.500"FiberglassNylon Coated-22 to 212900H15000000000000000
    1 1/2"96"1920.500"FiberglassNylon Coated-22 to 212960H15000000000000000
    1 1/2"100"2000.500"FiberglassNylon Coated-22 to 2121000H15000000000000000
    1 1/2"110"2200.500"FiberglassNylon Coated-22 to 2121100H15000000000000000
    1 1/2"125"2500.500"FiberglassNylon Coated-22 to 2121250H15000000000000000
    1 1/2"140"2800.500"FiberglassNylon Coated-22 to 2121400H15000000000000000
    1 1/2"170"3400.500"FiberglassNylon Coated-22 to 2121700H15000000000000000
    2"21"420.500"FiberglassNylon Coated-22 to 212210H2000000000000000
    2"22"440.500"FiberglassNylon Coated-22 to 212220H200000000000000
    2"23"460.500"FiberglassNylon Coated-22 to 212230H20000000000000000
    2"24"480.500"FiberglassNylon Coated-22 to 212240H2000000000000000
    2"27"540.500"FiberglassNylon Coated-22 to 212270H2000000000000000
    2"30"600.500"FiberglassNylon Coated-22 to 212300H2000000000000000
    2"32"640.500"FiberglassNylon Coated-22 to 212320H20000000000000000
    2"33"660.500"FiberglassNylon Coated-22 to 212330H2000000000000000
    2"34"680.500"FiberglassNylon Coated-22 to 212340H20000000000000000
    2"36"720.500"FiberglassNylon Coated-22 to 212360H20000000000000000
    2"37"740.500"FiberglassNylon Coated-22 to 212370H20000000000000000
    2"39"780.500"FiberglassNylon Coated-22 to 212390H2000000000000000
    2"40"800.500"FiberglassNylon Coated-22 to 212400H20000000000000000
    2"42"840.500"FiberglassNylon Coated-22 to 212420H20000000000000000
    2"45"900.500"FiberglassNylon Coated-22 to 212450H20000000000000000
    2"48"960.500"FiberglassNylon Coated-22 to 212480H20000000000000000
    2"51"1020.500"FiberglassNylon Coated-22 to 212510H20000000000000000
    2"54"1080.500"FiberglassNylon Coated-22 to 212540H20000000000000000
    2"56"1120.500"FiberglassNylon Coated-22 to 212560H20000000000000000
    2"57"1140.500"FiberglassNylon Coated-22 to 212570H20000000000000000
    2"60"1200.500"FiberglassNylon Coated-22 to 212600H20000000000000000
    2"63"1260.500"FiberglassNylon Coated-22 to 212630H2000000000000000
    2"66"1320.500"FiberglassNylon Coated-22 to 212660H20000000000000000
    2"70"1400.500"FiberglassNylon Coated-22 to 212700H20000000000000000
    2"75"1500.500"FiberglassNylon Coated-22 to 212750H20000000000000000
    2"80"1600.500"FiberglassNylon Coated-22 to 212800H20000000000000000
    2"85"1700.500"FiberglassNylon Coated-22 to 212850H20000000000000000
    2"90"1800.500"FiberglassNylon Coated-22 to 212900H20000000000000000
    2"96"1920.500"FiberglassNylon Coated-22 to 212960H20000000000000000
    2"100"2000.500"FiberglassNylon Coated-22 to 2121000H20000000000000000
    2"110"2200.500"FiberglassNylon Coated-22 to 2121100H20000000000000000
    2"125"2500.500"FiberglassNylon Coated-22 to 2121250H2000000000000000
    2"140"2800.500"FiberglassNylon Coated-22 to 2121400H20000000000000000
    2"170"3400.500"FiberglassNylon Coated-22 to 2121700H20000000000000000
     
    Abrasion-Resistant Urethane Rubber
     
    H Trade Size
    3/4"23"460.500"Steel-13 to 176230H0750000000000000
    3/4"24"480.500"Steel-13 to 176240H0750000000000000
    3/4"27"540.500"Steel-13 to 176270H0750000000000000
    3/4"30"600.500"Steel-13 to 176300H0750000000000000
    3/4"33"660.500"Steel-13 to 176330H0750000000000000
    3/4"36"720.500"Steel-13 to 176360H0750000000000000
    3/4"39"780.500"Steel-13 to 176390H0750000000000000
    3/4"42"840.500"Steel-13 to 176420H0750000000000000
    3/4"45"900.500"Steel-13 to 176450H0750000000000000
    3/4"48"960.500"Steel-13 to 176480H0750000000000000
    3/4"51"1020.500"Steel-13 to 176510H0750000000000000
    1"23"460.500"Steel-13 to 176230H1000000000000000
    1"24"480.500"Steel-13 to 176240H1000000000000000
    1"27"540.500"Steel-13 to 176270H1000000000000000
    1"30"600.500"Steel-13 to 176300H1000000000000000
    1"33"660.500"Steel-13 to 176330H1000000000000000
    1"36"720.500"Steel-13 to 176360H1000000000000000
    1"39"780.500"Steel-13 to 176390H1000000000000000
    1"42"840.500"Steel-13 to 176420H1000000000000000
    1"45"900.500"Steel-13 to 176450H1000000000000000
    1"48"960.500"Steel-13 to 176480H1000000000000000
    1"51"1020.500"Steel-13 to 176510H1000000000000000
    1 1/2"23"460.500"Steel-13 to 176230H1500000000000000
    1 1/2"24"480.500"Steel-13 to 176240H1500000000000000
    1 1/2"27"540.500"Steel-13 to 176270H1500000000000000
    1 1/2"30"600.500"Steel-13 to 176300H1500000000000000
    1 1/2"33"660.500"Steel-13 to 176330H1500000000000000
    1 1/2"36"720.500"Steel-13 to 176360H1500000000000000
    1 1/2"39"780.500"Steel-13 to 176390H1500000000000000
    1 1/2"42"840.500"Steel-13 to 176420H1500000000000000
    1 1/2"45"900.500"Steel-13 to 176450H1500000000000000
    1 1/2"48"960.500"Steel-13 to 176480H15000000000000000
    1 1/2"51"1020.500"Steel-13 to 176510H15000000000000000
     
    High-Temperature Silicone Rubber
     
    H Trade Size
    1"16.5"330.500"Aramid-40 to 400165H100000000000000000
    1"17.5"350.500"Aramid-40 to 400175H100000000000000000
    1"21"420.500"Aramid-40 to 400210H100000000000000000
    1"22.5"450.500"Aramid-40 to 400225H100000000000000000
    1"39"780.500"Aramid-40 to 400390H100000000000000000
    1"42"840.500"Aramid-40 to 400420H100000000000000000
    1 1/2"16.5"330.500"Aramid-40 to 400165H150000000000000000
    1 1/2"17.5"350.500"Aramid-40 to 400175H150000000000000000
    1 1/2"21"420.500"Aramid-40 to 400210H150000000000000000
    1 1/2"22.5"450.500"Aramid-40 to 400225H150000000000000000
    1 1/2"39"780.500"Aramid-40 to 400390H150000000000000000
    1 1/2"42"840.500"Aramid-40 to 400420H150000000000000000
     

    Cut-to-Length Timing Belts

    Image of Product. Front orientation. Contains Inset. Timing Belts. Cut-to-Length Timing Belts.
    Image of Attribute. Front orientation. Contains Annotated, Border. Trapezoidal Teeth.
    Use these timing belts for linear applications or join the ends to create a custom belt. Their trapezoidal teeth mesh with matching pulleys to transmit power without slipping. With the original tooth profile, these timing belts handle enough torque and synchronization for most applications. If you need high torque or precise starts and stops, consider a GT tooth profile.
    Neoprene—Durable and weather resistant, but lose elasticity if exposed to oil and fuel. These belts are reinforced, so they're strong enough to transmit power without stretching. Plus, nylon-coated teeth minimize friction and protect the surface from wear.
    Abrasion-Resistant Urethane Rubber—Won’t break down or create dust while they run. Plus, they last longer than neoprene belts. Aramid or steel reinforcements provide very high strength and low stretch.
    End Plates—Interlock with belt teeth to clamp them tightly in place without slippage.
    Timing Belts
    End Plates
    Wd.
    Pitch
    Reinforcement
    Material
    Tooth
    Finish
    Temp. Range,
    ° F
    Max. Continuous
    Lg., ft.
    Per
    Ft.
    Each
    Neoprene
     
    H Trade Size
    1/2"0.500"FiberglassNylon Coated-22 to 212500000000000000000000000000
    3/4"0.500"FiberglassNylon Coated-22 to 21250000000000000000000000000
    1"0.500"FiberglassNylon Coated-22 to 2125000000000000000000000000
    1 1/2"0.500"FiberglassNylon Coated-22 to 21250000000000000000000000000
    2"0.500"FiberglassNylon Coated-22 to 21250000000000000000000000000
     
    Abrasion-Resistant Urethane Rubber
     
    H Trade Size
    3/4"0.500"Aramid-22 to 2303280000000000000000000000
    1"0.500"Aramid-22 to 23032800000000000000000000000
     
    back to top