1/15 hp Pumps | McMaster-Carr

Filter by

Voltage

Maximum Flow Rate @ 1 Feet of Head

Maximum Flow Rate @ 10 Feet of Head

Discharge Pipe Size

For Use With

Pump Type

Discharge Connection Port

Discharge Connection

Cord Length

Power Source

Maximum Temperature

Housing Material

Maximum Feet of Head

Current

Flow Rate @ 10 Feet of Head

Intake Connection Port

Maximum Flow Rate

Frequency

Pump Style

RoHS Compliance

Power

REACH Compliance

DFARS Compliance

Forward

How can we improve?

20 Products

About Sump, Water-Removal, Condensate, and Submersible Pumps

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

About Drum Pumps

Extended-Life Immersion Circulation Pumps for Water and Coolants

A sealless construction means these pumps have few moving parts that can fail and shorten service life. The intake can be completely submerged in liquid. Pumps have a totally enclosed fan-cooled (TEFC) motor for use in dusty, dirty, and damp environments. They are gravity fed and require an elevated liquid source. Do not run dry.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

With Inlet and Tube Connections

										Discharge (Female)		Overall
Max. Flow Rate, gpm	Flow Rate @ 10 ft. of Head, gpm	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	Temp. Range, °F	Electrical Connection Type	hp	Current, A	Intake Connection Type	Tube Connection Type	For Tube OD	Dia.	Ht.	Shaft Ht.		Each
120V AC, Single Phase—With Thermal Overload Protection
11	7	13	5	70	50° to 150°	Plug	1/15	2.4	Screened Inlet	Push to Connect	5/8"	5"	13"	8 1/8"	0000000	0000000
11	7	13	5	70	50° to 150°	Plug	1/15	2.4	Screened Inlet	Push to Connect	5/8"	5"	15"	10 1/2"	0000000	000000
240V AC, Single Phase—With Thermal Overload Protection
11	7	13	5	70	50° to 150°	Plug	1/15	1.2	Screened Inlet	Push to Connect	5/8"	5"	10"	5 1/8"	0000000	000000
11	7	13	5	70	50° to 150°	Plug	1/15	1.2	Screened Inlet	Push to Connect	5/8"	5"	13"	8 1/8"	0000000	000000
11	7	13	5	70	50° to 150°	Plug	1/15	1.2	Screened Inlet	Push to Connect	5/8"	5"	15"	10 1/2"	0000000	000000

Replacement Impeller

0000000

Each

0000000

Battery-Operated Drum Pumps with Nozzle for Oil

Quickly and cleanly transfer oil with no need for an electrical connection, air connection, or manual pumping. These drum pumps come with everything they need to operate.

Add extra stem assemblies to move a single pump head across multiple containers.

Use additional pump heads to transfer oil to multiple locations at once. Pump heads fit all stem assemblies.

To control the exact amount of oil you move, connect a meter.

Add batteries to minimize downtime—swap in a second battery while another charges.

Pumps

								Intake Tube		Discharge (Hose and Nozzle)
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	For Use With	Temp. Range, °F	Horsepower	For Drum Opening Size	Includes	OD	Lg.	Hose ID	Hose Lg., ft.	Nozzle Type	Batteries Included	Features		Each
Single Phase—With Thermal Overload Protection
1.5	5	2,200	Automatic Transmission Fluid, Coolant, Gear Oil, Hydraulic Oil, Motor Oil	32° to 100°	1/15 hp	2 NPT	Drum Connector	1"	12 3/4"-17 1/2"	3/4"	5	Manual Shut-Off	Yes	Removable Pump Head	00000000	0000000
1.5	16 - 55	2,200	Automatic Transmission Fluid, Coolant, Gear Oil, Hydraulic Oil, Motor Oil	32° to 100°	1/15 hp	2 NPT	Drum Connector	1"	21 1/2"-39 3/4"	3/4"	5	Manual Shut-Off	Yes	Removable Pump Head	00000000	000000

Optional Stem Assemblies

			Intake Tube
For Container Size, gal.	For Drum Opening Size	Includes	OD	Lg.	Hose Lg., ft.	Nozzle Type		Each
For Automatic Transmission Fluid, Coolant, Gear Oil, Hydraulic Oil, Motor Oil
5	2 NPT	Drum Connector, Hose, Intake Tube, Nozzle	1"	12 3/4"-17 1/2"	5	Manual Shut-Off	00000000	0000000
16 - 55	2 NPT	Drum Connector, Hose, Intake Tube, Nozzle	1"	21 1/2"-39 3/4"	5	Manual Shut-Off	00000000	000000

Optional Pump Heads

Pump Head

Single Phase—With Thermal Overload Protection
Horsepower	No. of Batteries Required		Each
1/15 hp	1	00000000	0000000

Optional Meters

Meter

Scale	Accuracy	Temp. Range, °F	Pipe Size	Thread Type	Features		Each
Gallons, Liters, Quarts	±2%	0° to 155°	1/2	BSPP	Nonresettable Flow Counter for Total Volume; Resettable Batch Function	00000000	0000000

Optional Batteries

Battery

Voltage	Battery Capacity, amp-hrs.		Each
18V DC	2	00000000	000000

Optional Battery Chargers

Battery Charger

Battery Charging Time, hrs.	Battery Charger Voltage		Each
1	120V AC	00000000	000000

Submersible Pumps for Water

Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.

Style B

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
115V AC, Single Phase—With Thermal Overload Protection
B	Plug	5.6	4.3	0.8	11.1	35° to 85°	1/15 hp	0.8	Screened	1/4	NPT	Male	6	4"	3 7/8"	5 3/8"	0000000	000000

Style E

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
115V AC, Single Phase—With Thermal Overload Protection
E	Plug	20	12	4	15	35° to 85°	1/15 hp	1	Screened	3/4	NPT	Male	15	5 1/4"	3 3/4"	6 3/8"	00000000	0000000

Impact-Resistant Submersible/Open-Air Pumps for Water

Protected from impact by a durable epoxy-coated aluminum housing, these pumps can be submerged or connected remotely to a pipe in your line. Use to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.

Hardwire pumps must be wired to a plug (not included).

	Max. Flow Rate, gpm							Intake			Discharge			Overall
	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.	Features		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug
B	8.3	5.6	3.5	17.3	35° to 120°	1/15 hp	3.2	1/2	NPT	Female	1/2	NPT	Male	5 1/2"	4 1/2"	7"	Removable Intake Screen	000000	0000000
240V AC, Single Phase—With Thermal Overload Protection
Hardwire
B	10	8.6	6.9	21	35° to 120°	1/15 hp	1.4	1/2	NPT	Female	1/2	NPT	Male	5 1/2"	4 1/2"	7"	Removable Intake Screen	0000000	000000

Flood Coolant Dispensers with Reservoir

These dispensers have a reservoir for recirculating coolant. They provide a constant flow of coolant, so they dissipate heat more efficiently than mist and droplet dispensers, making them suitable for cooling long machine cycles. Coolant strainers prevent debris from getting into the recirculated coolant.

Maximum flow rate and shut-off height are for water-soluble oil. Shut-off height is the maximum height to which the water-soluble oil can be pumped.

					Nozzle				Reservoir
	Cap., gal.	Max. Flow Rate	Max. Pressure, psi	Coolant Outlet Hose Lg.	Lg.	Type	Nozzle Material	O'all Ht.	Wd.	Dp.	Reservoir Material	Shut-Off Ht., ft.	For Max. SSU Viscosity Grade	Voltage	Features		Each
For Use With Coolant, Water
B	5	500 gph @ 1 ft. of head	7.5	6 ft.	12"	Flexible	Acetal Plastic	8 1/2"	16 7/8"	11 1/4"	Polyethylene Plastic	17.3	300	120V AC	Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve	00000000	0000000
D	10	500 gph @ 1 ft. of head	7.5	4 ft.	12"	Flexible	Acetal Plastic	12"	25"	10"	Steel	17.3	300	120V AC	Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve	00000000	000000