McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    14 Products

    Low-Maintenance Plastic Circulation Pumps for Water and Coolants

    Eliminate seal wear and leakage with pumps that use magnets to turn the impeller. They’re often used with electroplating and photographic solutions. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.
    Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.
    Pumps with Pipe Connections (Front Intake)
    Image of Product. Front orientation. Centrifugal Pumps. Low-Maintenance Plastic Circulation Pumps for Water and Coolants, Pumps with Pipe Connections (Front Intake).
    Intake
    Discharge
    Overall
    Max. Flow
    Rate, gpm
    Flow Rate @ 10 ft.
    of Head, gpm
    Max. ft. of
    Head, ft.
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Connection
    Connection
    Type
    Connection
    Connection
    Type
    Lg.
    Wd.
    Ht.
    Each
    120V AC, Single Phase—With Thermal Overload Protection
     
    Plug In
    8514.662035 to 1501/301.5Threaded1/2 Female NPTThreaded1/2 Male NPT8 1/2"4"4 3/8"9930K510000000
     

    Condensate Pumps with Tank

    Image of Product. Front orientation. Condensate Pumps. Condensate Pumps with Tank, Style B.
    Image of Product. Front orientation. Condensate Pumps. Condensate Pumps with Tank, Style C.

    Style B

    Style C

    Equipped with a built-in container for condensate, these pumps work alongside your system to remove condensate from air conditioners, refrigerators, dehumidifiers, and other equipment. They are not submersible. A safety switch turns off your equipment in case of pump failure. Pumps turn on and off automatically.
    For the Manufacturer User Manual, click on a part number and select Product Detail.
    Style B
    Image of Product. Front orientation. Condensate Pumps. Condensate Pumps with Tank, Style B.
    Style B pumps have a low profile for use in areas with limited clearance.
    Max. Flow
    Rate, gpm
    Level
    Discharge
    Overall
    Tank Cap.,
    gal.
    @ 1 Ft.
    of Head
    @ 5 Ft.
    of Head
    @ 10 Ft.
    of Head
    Max. ft. of
    Head, ft.
    Max. Pressure,
    psi
    Turn
    On
    Turn
    Off
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Tube
    Connection
    For Tube
    ID
    Ht.
    Wd.
    Dp.
    Each
    120V AC, Single Phase—With Thermal Overload Protection
     
    Plug In
    0.31.31.10.82091"1/2"35 to 1201/301.5Barbed
    		3/8"5"5"12"99575K130000000
     
    240V AC, Single Phase—With Thermal Overload Protection
     
    Plug In
    0.31.31.10.81471"1/2"35 to 1201/300.5Barbed
    		3/8"5"5"12"99575K33000000
     
    Style C
    Image of Product. Front orientation. Condensate Pumps. Condensate Pumps with Tank, Style C.
    Style C pumps are often used with medium tonnage air conditioning and refrigerating units.
    Max. Flow
    Rate, gpm
    Level
    Discharge
    Overall
    Tank Cap.,
    gal.
    @ 1 Ft.
    of Head
    @ 5 Ft.
    of Head
    @ 10 Ft.
    of Head
    Max. ft. of
    Head, ft.
    Max. Pressure,
    psi
    Turn
    On
    Turn
    Off
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Tube
    Connection
    For Tube
    ID
    Ht.
    Wd.
    Dp.
    Each
    120V AC, Single Phase—With Thermal Overload Protection
     
    Plug In
    0.51.31.10.82092 1/4"1 1/4"35 to 1201/301.5Barbed
    		3/8"7"5"11"99575K21000000
     
    240V AC, Single Phase—With Thermal Overload Protection
     
    Plug In
    0.51.31.10.81772 1/4"1 1/4"35 to 1201/300.5Barbed
    		3/8"7"5"11"99575K4100000
     

    High-Pressure Peristaltic Pumps for Chemicals

    Image of Product. Front orientation. Peristaltic Pumps. High-Pressure Peristaltic Pumps for Chemicals.
    These pumps can be used with pressures four times higher than standard pumps. An adjustment dial lets you alter flow rate in 2.5% increments of the maximum flow without the hassle of changing tubing. Often used in boiler feed systems and water treatment, they're compatible with chemicals such as cleaning fluids and acid-washing solutions. Pumps are self-priming and create suction to draw liquid upward. They can run dry.
    Pumps
    Replacement
    Pump Heads
    Replacement
    Tubing
    Discharge
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Intake
    Connection
    Tube
    ID
    Tube
    OD
    Connection
    Lg.
    Wd.
    Ht.
    Includes
    Each
    Each
    Each
    120V AC, Single Phase
     
    Plug In
    0.3 to 51001,50035 to 1251/301.7Compression
    		3/16"1/4"Compression
    		11"5"6"20-ft. Lg. of LDPE Plastic Intake/Discharge Tubing9154K5100000009154K6100000009154K64000000
    0.8 to 171001,50035 to 1251/301.7Compression
    		3/16"1/4"Compression
    		11"5"6"20-ft. Lg. of LDPE Plastic Intake/Discharge Tubing9154K520000009154K620000009154K6500000
    2 to 401001,50035 to 1251/301.7Compression
    		3/16"1/4"Compression
    		11"5"6"20-ft. Lg. of LDPE Plastic Intake/Discharge Tubing9154K530000009154K630000009154K6600000
     
    back to top