McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    3 Products

    Hazardous Location High-Flow Battery-Operated Drum Pumps with Nozzle for Fuel

    Image of Product. Front orientation. ZoomedIn view. Drum Pumps. Hazardous Location High-Flow Battery-Operated Drum Pumps with Nozzle for Fuel.
    These pumps are C-UL listed for Class I, Division 2, Group D for use in environments with flammable gases. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene. They have an automatic shut-off nozzle so they turn off when the tank is full. Lock the nozzle with a padlock (not included).
    Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
    Temp.,
    ° F
    Discharge (Hose
    and Nozzle)
    Flow Rate,
    gpm
    Discharge
    Pressure, psi
    Max. Viscosity,
    cP
    Min.
    Max.
    Power,
    hp
    Current,
    amp
    Max. Lift,
    ft.
    For Drum Opening
    Size
    Includes
    Intake Pipe
    Connection
    Hose
    ID
    Hose Lg.,
    ft.
    Nozzle Type
    Max. Shackle
    Dia.
    Each
    12V DC—With Thermal Overload Protection
    252010-201254/1035152 NPT18-ft. Battery Cable, Drum Connector1 Female NPT1"18Automatic Shutoff
    Lockable    		5/16"0000000000000000
     

    Dewatering Pumps with Hose

    Image of Product. Front orientation. Dewatering Pumps. Dewatering Pumps with Hose.
    Use this pump to remove water with small solids up to 1/4" in diameter. It activates when plugged in; add a plug-in switch to control when the pump activates. Install in water that's at least 2" deep. Pump includes a 25-ft. hose with cam and groove fittings for quick, secure connections and a storage crate with built-in filtration to protect the pump from debris.
    Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.
    Max. Flow Rate, gpm
    Discharge
    Overall
    @ 5 Ft.
    of Head
    @ 10 Ft.
    of Head
    @ 15 Ft.
    of Head
    @ 20 Ft.
    of Head
    Max. Flow
    Rate, gpm
    Max. ft. of
    Head, ft.
    Max. Solids
    Dia.
    Removes
    Water Down To
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Connection
    Coupling Size
    Connection
    Gender
    Ht.
    Wd.
    Lg.
    Includes
    Each
    120V AC, Single Phase—Without Thermal Overload Protection
     
    Plug with 15" Long Cord
    4132231141251/4"7/16"35 to 1004/1031 1/4Cam and GrooveMale12 3/4"11 13/16"15 3/4"25' Durable Cloth Hose, Carrying Cage00000000000000
     

    Float-Switch Activated Sump Pumps for Sewage Water

    Image of Product. Front orientation. Sump Pumps. Float-Switch Activated Sump Pumps for Sewage Water.
    Equipped with a large intake and a rugged impeller, this pump transfers raw sewage water with solids up to 2" in diameter. It has a cast iron housing that stands up to demanding environments. The float switch is wired to the pump. Submerge while in use and do not run dry.
    Max. Flow
    Rate, gpm
    Level
    Discharge
    Min.
    Sump Pit
    Overall
    @ 5 Ft.
    of Head
    @ 10 Ft.
    of Head
    @ 15 Ft.
    of Head
    Max. ft. of
    Head, ft.
    Max. Solids
    Dia.
    Housing
    Material
    Turn-On
    Turn-Off
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Max. Temp.,
    ° F
    Intake Inlet
    Type
    Connection
    Pipe
    Size
    Thread
    Type
    Gender
    Dia.
    Dp.
    Ht.
    Wd.
    Lg.
    Each
    120V AC, Single Phase—With Thermal Overload Protection
     
    Plug In with 20 ft. Long Cord
    1008060202"Cast Iron13"8"35 to 1404/108140OpenThreaded2
    		NPT
    		Female18"30"14 1/2"11"9"000000000000000
     
    back to top