Pure Aluminum | McMaster-Carr

Filter by

Thickness

Shape

Width

Length

Material

Diameter

Temper Designation

Performance

Highly Corrosion Resistant

Interference Shielding

Ultra Formable

Ultra Weldable

Ultra-Low Temperature

Heat Treatment

Hardness Rating

Appearance

Maximum Temperature

Elongation

Fabrication

Hardness

Yield Strength

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Minimum Temperature

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

DFARS Specialty Metals

Exempt

RoHS

Compliant

Conductivity Percentage

Specifications Met

Container Type

Container Net Weight

267 Products

About Aluminum

Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.

Aluminum Foil

Shield, insulate, and make quick repairs—aluminum foil is a jack-of-all-trades. Wrap it around pipe to hold in heat and keep out moisture, or around wire to block electromagnetic interference. To patch damaged insulation, tape it over tears and holes. You can also use it to cover surfaces while painting and processing.

Black Powder-Coated Foil—With a black powder coating, this foil blocks leaks, reduces reflections, and absorbs radiant heat. Use it to wrap ductwork, shield equipment from stray light, and insulate electrical enclosures.

Annealed—This foil is softened until it's as flexible as possible, often called "dead soft." It conforms to complex shapes and contours, making it a good choice for sealing joints and wrapping HVAC ducts.

Hardened—Stronger than annealed foil, this foil resists bending and denting from daily wear and tear. Use it to seal duct seams, cut custom gaskets, and create shims.

	Thk.	Thk. Tolerance	Wd.	Lg.	Material	Fabrication	Temper Designation	Pkg. Qty.		Pkg.
Annealed







				Foil

				0.0005"	-0.0001" to 0.0001"	9"	10 3/4"	1000 Series Aluminum	Cast	O	500	9060K34	000000


				0.0007"	-0.0001" to 0.0001"	12"	10 3/4"	1000 Series Aluminum	Cast	O	500	9060K35	00000
				0.0007"	-0.0001" to 0.0001"	12"	500 ft.	1000 Series Aluminum	Cast	O	1	9060K51	00000
				0.0007"	-0.0001" to 0.0001"	12"	1,000 ft.	1000 Series Aluminum	Cast	O	1	9060K19	000000
				0.0007"	-0.0001" to 0.0001"	18"	500 ft.	1000 Series Aluminum	Cast	O	1	9060K52	00000
				0.0007"	-0.0001" to 0.0001"	18"	1,000 ft.	1000 Series Aluminum	Cast	O	1	9060K23	000000
				0.0010"	-0.0001" to 0.0001"	6"	100 ft.	1000 Series Aluminum	Cast	O	1	9060K61	00000
				0.0010"	-0.0001" to 0.0001"	12"	100 ft.	1000 Series Aluminum	Cast	O	1	9060K62	00000
				0.0010"	-0.0001" to 0.0001"	12"	250 ft.	1000 Series Aluminum	Cast	O	1	9060K53	00000
				0.0010"	-0.0001" to 0.0001"	12"	500 ft.	1000 Series Aluminum	Cast	O	1	9060K12	00000
				0.0010"	-0.0001" to 0.0001"	18"	100 ft.	1000 Series Aluminum	Cast	O	1	9060K63	00000


				0.0010"	-0.0001" to 0.0001"	18"	250 ft.	1000 Series Aluminum	Cast	O	1	9060K54	00000
				0.0010"	-0.0001" to 0.0001"	18"	500 ft.	1000 Series Aluminum	Cast	O	1	9060K17	000000
				0.0010"	-0.0001" to 0.0001"	18"	1,000 ft.	1000 Series Aluminum	Cast	O	1	9060K24	000000
				0.0015"	-0.0002" to 0.0002"	6"	250 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K56	00000
				0.0015"	-0.0002" to 0.0002"	6"	500 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K21	000000
				0.0015"	-0.0002" to 0.0002"	8"	250 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K57	000000
				0.0015"	-0.0002" to 0.0002"	8"	500 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K22	000000
				0.0020"	-0.0002" to 0.0002"	6"	100 ft.	1000 Series Aluminum	Cast	O	1	9060K64	00000
				0.0020"	-0.0002" to 0.0002"	12"	100 ft.	1000 Series Aluminum	Cast	O	1	9060K65	00000
				0.0020"	-0.0002" to 0.0002"	12"	250 ft.	1000 Series Aluminum	Cast	O	1	9060K66	000000


				0.0020"	-0.0002" to 0.0002"	18"	100 ft.	1000 Series Aluminum	Cast	O	1	9060K67	00000
				0.0020"	-0.0002" to 0.0002"	18"	250 ft.	1000 Series Aluminum	Cast	O	1	9060K18	000000
				0.0020"	-0.0002" to 0.0002"	18"	500 ft.	1000 Series Aluminum	Cast	O	1	9060K59	000000
				0.0030"	-0.0003" to 0.0003"	12"	50 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K72	00000
				0.0030"	-0.0003" to 0.0003"	36"	50 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K73	000000
				0.0030"	-0.0003" to 0.0003"	36"	100 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K14	000000
				0.0030"	-0.0003" to 0.0003"	48"	100 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K15	000000
				0.0050"	-0.0005" to 0.0005"	6"	50 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K75	00000
				0.0050"	-0.0005" to 0.0005"	12"	50 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K76	00000
				0.0050"	-0.0005" to 0.0005"	24"	50 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K77	000000


				0.0050"	-0.0005" to 0.0005"	36"	50 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K78	000000
				0.0050"	-0.0005" to 0.0005"	36"	100 ft.	1000 Series Aluminum	Cold Rolled	O	1	9060K16	000000
				0.0100"	-0.001" to 0.001"	6"	50 ft.	1000 Series Aluminum	Cast	O	1	9060K68	00000
				0.0100"	-0.001" to 0.001"	12"	50 ft.	1000 Series Aluminum	Cast	O	1	9060K69	000000
				0.0100"	-0.001" to 0.001"	24"	50 ft.	1000 Series Aluminum	Cast	O	1	9060K71	000000




						Adhesive-Backed Foil

						0.0015"	-0.0002" to 0.0002"	6"	180 ft.	1000 Series Aluminum	Cold Rolled	O	1	8941K24	000000


						0.0015"	-0.0002" to 0.0002"	18"	50 ft.	1000 Series Aluminum	Cold Rolled	O	1	8941K27	000000
						0.0015"	-0.0002" to 0.0002"	18"	180 ft.	1000 Series Aluminum	Cold Rolled	O	1	8941K26	000000
0.0020"						-0.0002" to 0.0002"	6"	100 ft.	1000 Series Aluminum	Cold Rolled	O	1	8941K25	000000
0.0040"	-0.0004" to 0.0004"					6"	180 ft.	1000 Series Aluminum	Cold Rolled	O	1	8941K28	000000
0.0040"	-0.0004" to 0.0004"					18"	180 ft.	1000 Series Aluminum	Cold Rolled	O	1	8941K31	000000




		Black Powder-Coated Foil

		0.0020"	-0.0002" to 0.0002"			12"	10 ft.	1000 Series Aluminum	Extruded	O	1	7073T24	00000


		0.0020"	-0.0002" to 0.0002"			24"	10 ft.	1000 Series Aluminum	Extruded	O	1	7073T26	00000


		Hardened







								Foil

								0.001"	-0.0001" to 0.0001"	6"	50 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K11	00000


								0.001"	-0.0001" to 0.0001"	6"	100 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K13	00000
								0.001"	-0.0001" to 0.0001"	18"	50 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K15	000000
								0.001"	-0.0001" to 0.0001"	18"	100 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K17	000000
								0.002"	-0.0002" to 0.0002"	6"	50 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K19	00000
								0.002"	-0.0002" to 0.0002"	6"	100 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K21	00000
								0.002"	-0.0002" to 0.0002"	18"	50 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K23	000000
								0.002"	-0.0002" to 0.0002"	18"	100 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K25	000000
								0.003"	-0.0003" to 0.0003"	2"	25 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K26	00000
								0.003"	-0.0003" to 0.0003"	6"	50 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K27	00000
								0.003"	-0.0003" to 0.0003"	6"	100 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K29	00000


								0.003"	-0.0003" to 0.0003"	18"	50 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K31	000000
								0.003"	-0.0003" to 0.0003"	18"	100 ft.	1100 Aluminum	Cold Rolled	H19	1	9012K33	000000

Highly Conductive 1100 Aluminum Sheets

At 99% pure, 1100 is among the most conductive, corrosion-resistant, and formable aluminum alloys. Since it’s so soft, it’s often shaped into terminal blocks, raceways, and other parts that don’t need to be hard or strong. For high-stress electrical parts such as bus bars, look to 6101 aluminum instead.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

					Annealed			Hardened
	Wd.	Lg.	Fabrication	Specs. Met	Temper Designation		Each	Temper Designation		Each
0.020" Thick (-0.0045" to 0.0045" Tolerance)



		2"	24"	Cold Rolled	ASTM B209	O	2471T921	00000	—	———	0


		4"	24"	Cold Rolled	ASTM B209	O	2471T922	00000	—	———	0
		6"	6"	Cold Rolled	ASTM B209	O	2471T923	0000	—	———	0
		6"	12"	Cold Rolled	ASTM B209	O	2471T924	00000	—	———	0
		6"	24"	Cold Rolled	ASTM B209	O	2471T925	00000	—	———	0
		12"	12"	Cold Rolled	ASTM B209	O	2471T13	00000	—	———	0
		12"	24"	Cold Rolled	ASTM B209	O	2471T16	00000	—	———	0
		24"	24"	Cold Rolled	ASTM B209	O	2471T17	00000	—	———	0
		24"	48"	Cold Rolled	ASTM B209	O	2471T18	00000	—	———	0


		0.032" Thick (-0.0045" to 0.0045" Tolerance)



				2"	24"	Cold Rolled	ASTM B209	O	2471T931	0000	—	———	0


				4"	24"	Cold Rolled	ASTM B209	O	2471T932	00000	—	———	0
				6"	6"	Cold Rolled	ASTM B209	O	2471T933	0000	—	———	0
				6"	12"	Cold Rolled	ASTM B209	O	2471T934	00000	—	———	0
				6"	24"	Cold Rolled	ASTM B209	O	2471T935	00000	—	———	0
				12"	12"	Cold Rolled	ASTM B209	O	2471T11	00000	—	———	0
				12"	24"	Cold Rolled	ASTM B209	O	2471T12	00000	—	———	0
				24"	24"	Cold Rolled	ASTM B209	O	2471T26	00000	—	———	0
				24"	48"	Cold Rolled	ASTM B209	O	2471T27	00000	—	———	0


				0.032" Thick (-0.0040" to 0.0040" Tolerance)



						6"	6"	Cold Worked	ASTM B209	—	———	0	H14	88685K911	000000


						6"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K912	00000
						6"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K913	00000
						12"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K11	00000
						12"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K14	00000
						24"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K17	00000
						24"	36"	Cold Worked	ASTM B209	—	———	0	H14	88685K21	00000
						24"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K914	000000
						48"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K915	000000
						48"	96"	Cold Worked	ASTM B209	—	———	0	H14	88685K916	000000


						0.040" Thick (-0.0045" to 0.0045" Tolerance)



								2"	24"	Cold Rolled	ASTM B209	O	2471T941	0000	—	———	0


								4"	24"	Cold Rolled	ASTM B209	O	2471T942	00000	—	———	0
								6"	6"	Cold Rolled	ASTM B209	O	2471T943	0000	—	———	0
								6"	12"	Cold Rolled	ASTM B209	O	2471T944	00000	—	———	0
								6"	24"	Cold Rolled	ASTM B209	O	2471T945	00000	—	———	0
								12"	12"	Cold Rolled	ASTM B209	O	2471T21	00000	—	———	0
								12"	24"	Cold Rolled	ASTM B209	O	2471T22	00000	—	———	0
24"								24"	Cold Rolled	ASTM B209	O	2471T23	00000	—	———	0
24"	48"							Cold Rolled	ASTM B209	O	2471T24	00000	—	———	0


0.050" Thick (-0.0050" to 0.0050" Tolerance)



								6"	6"	Cold Worked	ASTM B209	—	———	0	H14	88685K921	00000


								6"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K922	00000
								6"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K923	00000
								12"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K51	00000
								12"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K52	00000
								24"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K53	00000
								24"	36"	Cold Worked	ASTM B209	—	———	0	H14	88685K924	000000
								24"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K54	000000
		48"						48"	Cold Worked	ASTM B209	—	———	0	H14	88685K55	000000
		48"	96"					Cold Worked	ASTM B209	—	———	0	H14	88685K56	000000


		0.050" Thick (-0.0045" to 0.0045" Tolerance)



								2"	24"	Cold Rolled	ASTM B209	O	2471T951	0000	—	———	0


								4"	24"	Cold Rolled	ASTM B209	O	2471T952	00000	—	———	0
								6"	6"	Cold Rolled	ASTM B209	O	2471T953	0000	—	———	0
								6"	12"	Cold Rolled	ASTM B209	O	2471T954	00000	—	———	0
								6"	24"	Cold Rolled	ASTM B209	O	2471T955	00000	—	———	0
								12"	12"	Cold Rolled	ASTM B209	O	2471T31	00000	—	———	0
								12"	24"	Cold Rolled	ASTM B209	O	2471T32	00000	—	———	0
								24"	24"	Cold Rolled	ASTM B209	O	2471T33	00000	—	———	0
				24"				48"	Cold Rolled	ASTM B209	O	2471T34	00000	—	———	0


				0.063" Thick (-0.0050" to 0.0050" Tolerance)



								6"	6"	Cold Worked	ASTM B209	—	———	0	H14	88685K931	00000


								6"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K932	00000
								6"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K933	00000
								12"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K12	00000
								12"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K15	00000
								24"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K18	00000
								24"	36"	Cold Worked	ASTM B209	—	———	0	H14	88685K32	000000
								24"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K934	000000
								48"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K935	000000
								48"	96"	Cold Worked	ASTM B209	—	———	0	H14	88685K936	000000


						0.063" Thick (-0.0045" to 0.0045" Tolerance)



								2"	24"	Cold Rolled	ASTM B209	O	2471T861	00000	—	———	0


								4"	24"	Cold Rolled	ASTM B209	O	2471T862	00000	—	———	0
								6"	6"	Cold Rolled	ASTM B209	O	2471T863	00000	—	———	0
								6"	12"	Cold Rolled	ASTM B209	O	2471T864	00000	—	———	0
								6"	24"	Cold Rolled	ASTM B209	O	2471T865	00000	—	———	0
								12"	12"	Cold Rolled	ASTM B209	O	2471T41	00000	—	———	0
12"								24"	Cold Rolled	ASTM B209	O	2471T42	00000	—	———	0
24"	24"							Cold Rolled	ASTM B209	O	2471T43	00000	—	———	0
24"	48"							Cold Rolled	ASTM B209	O	2471T44	000000	—	———	0


0.080" Thick (-0.0045" to 0.0045" Tolerance)



								2"	24"	Cold Rolled	ASTM B209	O	2471T871	00000	—	———	0


								4"	24"	Cold Rolled	ASTM B209	O	2471T872	00000	—	———	0
								6"	6"	Cold Rolled	ASTM B209	O	2471T873	00000	—	———	0
								6"	12"	Cold Rolled	ASTM B209	O	2471T874	00000	—	———	0
								6"	24"	Cold Rolled	ASTM B209	O	2471T875	00000	—	———	0
								12"	12"	Cold Rolled	ASTM B209	O	2471T51	00000	—	———	0
								12"	24"	Cold Rolled	ASTM B209	O	2471T52	00000	—	———	0
								24"	24"	Cold Rolled	ASTM B209	O	2471T53	00000	—	———	0
		24"						48"	Cold Rolled	ASTM B209	O	2471T54	000000	—	———	0


		0.090" Thick (-0.0060" to 0.0060" Tolerance)



								6"	6"	Cold Worked	ASTM B209	—	———	0	H14	88685K941	00000


								6"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K942	00000
								6"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K943	00000
								12"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K77	00000
								12"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K78	00000
								24"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K79	000000
								24"	36"	Cold Worked	ASTM B209	—	———	0	H14	88685K944	000000
								24"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K81	000000
								48"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K82	000000
				48"				96"	Cold Worked	ASTM B209	—	———	0	H14	88685K83	000000


				0.090" Thick (-0.0045" to 0.0045" Tolerance)



								2"	24"	Cold Rolled	ASTM B209	O	2471T891	00000	—	———	0


								4"	24"	Cold Rolled	ASTM B209	O	2471T892	00000	—	———	0
								6"	6"	Cold Rolled	ASTM B209	O	2471T893	00000	—	———	0
								6"	12"	Cold Rolled	ASTM B209	O	2471T894	00000	—	———	0
								6"	24"	Cold Rolled	ASTM B209	O	2471T895	00000	—	———	0
								12"	12"	Cold Rolled	ASTM B209	O	2471T61	00000	—	———	0
								12"	24"	Cold Rolled	ASTM B209	O	2471T62	00000	—	———	0
								24"	24"	Cold Rolled	ASTM B209	O	2471T63	000000	—	———	0
								24"	48"	Cold Rolled	ASTM B209	O	2471T64	000000	—	———	0


						1/8" Thick (-0.0070" to 0.0070" Tolerance)



								6"	6"	Cold Worked	ASTM B209	—	———	0	H14	88685K1	00000


								6"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K952	00000
								6"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K953	00000
								12"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K13	00000
								12"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K16	00000
								24"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K19	000000
								24"	36"	Cold Worked	ASTM B209	—	———	0	H14	88685K954	000000
24"								48"	Cold Worked	ASTM B209	—	———	0	H14	88685K23	000000
48"	48"							Cold Worked	ASTM B209	—	———	0	H14	88685K26	000000
48"	96"							Cold Worked	ASTM B209	—	———	0	H14	88685K29	000000


1/8" Thick (-0.0045" to 0.0045" Tolerance)



								2"	24"	Cold Rolled	ASTM B209	O	2471T911	00000	—	———	0


								4"	24"	Cold Rolled	ASTM B209	O	2471T912	00000	—	———	0
								6"	6"	Cold Rolled	ASTM B209	O	2471T913	00000	—	———	0
								6"	12"	Cold Rolled	ASTM B209	O	2471T914	00000	—	———	0
								6"	24"	Cold Rolled	ASTM B209	O	2471T915	00000	—	———	0
								12"	12"	Cold Rolled	ASTM B209	O	2471T71	00000	—	———	0
								12"	24"	Cold Rolled	ASTM B209	O	2471T72	00000	—	———	0
		24"						24"	Cold Rolled	ASTM B209	O	2471T73	000000	—	———	0
		24"	48"					Cold Rolled	ASTM B209	O	2471T74	000000	—	———	0


		0.190" Thick (-0.0110" to 0.0110" Tolerance)



								6"	6"	Cold Worked	ASTM B209	—	———	0	H14	88685K961	00000


								6"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K962	00000
								6"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K963	00000
								12"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K41	00000
								12"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K42	000000
								24"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K43	000000
								24"	36"	Cold Worked	ASTM B209	—	———	0	H14	88685K964	000000
								24"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K44	000000
								48"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K45	000000
				48"				96"	Cold Worked	ASTM B209	—	———	0	H14	88685K46	00000000


				1/4" Thick (-0.0160" to 0.0160" Tolerance)



								6"	6"	Cold Worked	ASTM B209	—	———	0	H14	88685K971	00000


								6"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K972	00000
								6"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K973	000000
								12"	12"	Cold Worked	ASTM B209	—	———	0	H14	88685K61	000000
								12"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K62	000000
								24"	24"	Cold Worked	ASTM B209	—	———	0	H14	88685K63	000000
								24"	36"	Cold Worked	ASTM B209	—	———	0	H14	88685K974	000000
								24"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K64	000000
								48"	48"	Cold Worked	ASTM B209	—	———	0	H14	88685K65	00000000
						48"		96"	Cold Worked	ASTM B209	—	———	0	H14	88685K975	00000000

Aluminum Wire


Package	Coil	Spool

Bend this wire and it stays put. It’s often used for securing and bundling applications. Made of 1100 aluminum, it won’t degrade from salt water or mild chemicals, and it conducts electricity almost as well as copper.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Lg., ft.	Fabrication	Temper Designation	Specs. Met	Container Type	Pkg. Qty.		Pkg.
0.013" Diameter (-0.001" to 0.001" Tolerance)



		1	Cold Drawn	O	ASTM B211	Package	25	8904K87	00000


		1,735	Cold Drawn	O	ASTM B211	Spool	1	8904K39	00000
		6,940	Cold Drawn	O	ASTM B211	Spool	1	8904K76	00000
		34,700	Cold Drawn	O	ASTM B211	Spool	1	8904K45	000000


		0.016" Diameter (-0.001" to 0.001" Tolerance)



				1	Cold Drawn	O	ASTM B211	Package	25	8904K88	0000


				1,085	Cold Drawn	O	ASTM B211	Spool	1	8904K37	00000
				4,355	Cold Drawn	O	ASTM B211	Spool	1	8904K77	00000
				21,790	Cold Drawn	O	ASTM B211	Spool	1	8904K46	000000


				0.020" Diameter (-0.001" to 0.001" Tolerance)



						1	Cold Drawn	O	ASTM B211	Package	25	8904K89	00000


						680	Cold Drawn	O	ASTM B211	Spool	1	8904K35	00000
						2,725	Cold Drawn	O	ASTM B211	Spool	1	8904K78	00000
						13,635	Cold Drawn	O	ASTM B211	Spool	1	8904K47	000000


						0.025" Diameter (-0.001" to 0.001" Tolerance)



								1	Cold Drawn	O	ASTM B211	Package	25	8904K91	00000


								430	Cold Drawn	O	ASTM B211	Spool	1	8904K33	00000
								1,720	Cold Drawn	O	ASTM B211	Spool	1	8904K79	00000
								8,605	Cold Drawn	O	ASTM B211	Spool	1	8904K48	000000


								0.032" Diameter (-0.001" to 0.001" Tolerance)



										1	Cold Drawn	O	ASTM B211	Package	10	8904K92	0000


										265	Cold Drawn	O	ASTM B211	Spool	1	8904K31	00000
										1,075	Cold Drawn	O	ASTM B211	Spool	1	8904K81	00000
										5,380	Cold Drawn	O	ASTM B211	Spool	1	8904K49	000000


										0.040" Diameter (-0.002" to 0.002" Tolerance)



												1	Cold Drawn	O	ASTM B211	Package	10	8904K93	0000


165	Cold Drawn											O	ASTM B211	Spool	1	8904K71	00000
675	Cold Drawn											O	ASTM B211	Spool	1	8904K82	00000
3,390	Cold Drawn											O	ASTM B211	Spool	1	8904K51	000000


0.051" Diameter (-0.002" to 0.002" Tolerance)



												1	Cold Drawn	O	ASTM B211	Package	10	8904K94	0000


		105	Cold Drawn									O	ASTM B211	Spool	1	8904K72	00000
		425	Cold Drawn									O	ASTM B211	Spool	1	8904K83	00000
		2,130	Cold Drawn									O	ASTM B211	Spool	1	8904K52	000000


		0.064" Diameter (-0.002" to 0.002" Tolerance)



												1	Cold Drawn	O	ASTM B211	Package	10	8904K95	0000


				67								Cold Drawn	O	ASTM B211	Spool	1	8904K73	00000
				265	Cold Drawn							O	ASTM B211	Spool	1	8904K84	00000
				1,340	Cold Drawn							O	ASTM B211	Spool	1	8904K53	000000


				0.080" Diameter (-0.002" to 0.002" Tolerance)



												2,025	Cold Drawn	O	ASTM B211	Coil	1	8866K13	000000


												0.081" Diameter (-0.002" to 0.002" Tolerance)



												1	Cold Drawn	O	ASTM B211	Package	10	8904K96	00000


												42	Cold Drawn	O	ASTM B211	Spool	1	8904K74	00000
												165	Cold Drawn	O	ASTM B211	Spool	1	8904K85	00000
												840	Cold Drawn	O	ASTM B211	Spool	1	8904K54	00000


												0.114" Diameter (-0.002" to 0.002" Tolerance)



												21	Cold Drawn	O	ASTM B211	Spool	1	8904K41	0000


												84	Cold Drawn	O	ASTM B211	Spool	1	8904K42	00000
												420	Cold Drawn	O	ASTM B211	Spool	1	8904K55	00000
												1,010	Cold Drawn	O	ASTM B211	Coil	1	8866K12	000000


												0.125" Diameter (-0.002" to 0.002" Tolerance)



												830	Cold Drawn	O	ASTM B211	Coil	1	8866K15	000000


												0.126" Diameter (-0.002" to 0.002" Tolerance)



17	Cold Drawn													O	ASTM B211	Spool	1	8904K75	00000


69	Cold Drawn													O	ASTM B211	Spool	1	8904K86	00000
330	Cold Drawn													O	ASTM B211	Spool	1	8904K56	00000

Materials for High-Vacuum Thin Film Protective Coatings

Coat knobs, handles, mirrors, and other objects with a micron-thin, decorative finish. 99.999% or 99.88% elementally pure, these metals vaporize when heated with low-voltage current inside a high-vacuum environment. The material then coats the object one atom at a time. Also known as physical vapor deposition (PVD), this process allows for super-thin coatings that are more consistent, wear resistant, and corrosion resistant than coatings created through other methods. Hold and heat the material in a material holder.

All materials will coat metal and plastic with a silvery-white color.

Aluminum—Aluminum has a dull appearance.

							25 g		100 g
	Lg.	Dia.	For Color	For Appearance	Material Composition	Certificate Type		Each		Each
Pellets







				Aluminum

				1/8"	1/8"	Silver	Dull	99.999% Aluminum, 0.001% Other	Material Certificate with Traceable Lot Number	3407N11	000000	3407N12	0000000

High-Vacuum Aluminum Foil

Disperse heat evenly without contaminating high-vacuum systems. “A” wettable according to ASTM B479, this foil is completely free of oil that could interfere with your system’s vacuum. It’s sealed in plastic and packed in a plastic box, so you can trust it’s contaminant-free. You can also use it in clean rooms and other environments where dust and oil might jeopardize your system. Also known as UHV (ultra-high-vacuum) foil.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Thk. Tolerance	Wd.	Lg., ft.	Fabrication	Temper Designation	Specs. Met		Each
1100 Aluminum



	0.0010"	-0.00015" to 0.00015"	6"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N141	0000000


	0.0010"	-0.00015" to 0.00015"	6"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N142	000000
	0.0010"	-0.00015" to 0.00015"	12"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N147	000000
	0.0010"	-0.00015" to 0.00015"	12"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N11	000000
	0.0010"	-0.00015" to 0.00015"	18"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N151	000000
	0.0010"	-0.00015" to 0.00015"	18"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N152	000000
	0.0010"	-0.00015" to 0.00015"	24"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N157	000000
	0.0010"	-0.00015" to 0.00015"	24"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N12	000000
	0.0015"	-0.00015" to 0.00015"	6"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N143	000000
	0.0015"	-0.00015" to 0.00015"	6"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N144	000000
	0.0015"	-0.00015" to 0.00015"	12"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N148	000000


	0.0015"	-0.00015" to 0.00015"	12"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N13	000000
	0.0015"	-0.00015" to 0.00015"	18"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N153	000000
	0.0015"	-0.00015" to 0.00015"	18"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N154	000000
	0.0015"	-0.00015" to 0.00015"	24"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N158	000000
	0.0015"	-0.00015" to 0.00015"	24"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N14	000000
	0.0020"	-0.00015" to 0.00015"	6"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N145	000000
	0.0020"	-0.00015" to 0.00015"	12"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N149	000000
	0.0020"	-0.00015" to 0.00015"	18"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N155	000000
	0.0020"	-0.00015" to 0.00015"	18"	500	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N156	000000
	0.0020"	-0.00015" to 0.00015"	24"	250	Cold Rolled	O	ASTM B479, Fed. Spec. QQ-A-1876	4650N159	000000