These seals have a solid bulb.

Able to withstand temperatures up to 500° F, these all-rubber silicone seals resist water and salts.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.

Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.

Use these H-seals to lock out moisture, dust, and debris around windows and panels.

The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.

It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

These solid EPDM rubber seals also resist salts.

These seals are made of solid EPDM foam rubber.

These hollow seals offer better compressibility than solid seals.

Hollow construction makes these seals more compressible than solid seals.

The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

These loosely knitted fiberglass seals are more flexible, compressible, and conformable than High-Temperature Rope Edge Seals.

Made of 96% silica, these seals resist temperatures up to 1800° F.

Alumina silicate is loosely woven to create these ceramic seals that are stronger and more flexible than Ultra High- and Low-Temperature Rope Seals. They can handle temperatures from –300° to 2300° F.

These seals have a strong Inconel core covered with woven silica yarn that’s been treated to withstand temperatures up to 2300° F. They resist most refrigerants, salts, and grease.

A ceramic cover makes these seals more chemical resistant than the seals with a silica cover. They resist acids (except hydrofluoric and phosphoric), diluted alkalies, most refrigerants, salts, and grease. Seals can withstand temperatures up to 1700° F.

Made of fiberglass, these seals are woven tighter than High-Temperature Ultra-Conformable Slotted Edge Seals for increased durability. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

Push these plugs into an opening and friction holds them in place.

Often used on metal furniture, these plugs provide a finished look on posts and tubes. Snap them into place and their flexible ridges will provide a secure grip.

Push these plugs into an opening and friction holds them in place.

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

Made of FDA listed materials, these caps are suitable for food contact.

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Slide these flexible vinyl caps on and they conform for a snug fit.

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

Slide these flexible vinyl caps on and they conform for a snug fit. Pull the tab for easy removal.

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Sized to fit hex nuts, these caps snap on for a tight hold and provide protection from corrosion.

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Even after extended compression, these sheets and strips will bounce back to shape.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.