McMaster-Carr logo
    Filter by
    System of Measurement
    Washer Type
    For Use With
    Maximum Pressure for Gases
    Shape
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Maximum Pressure for Fluids
    Application
    Pressure Rating
    Maximum Pressure
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    200 Products

    High-Pressure Bonded Sealing Washers

    Tested to hold up to high pressures, these washers create the strongest seal of all to lock in air and fluid and keep equipment running efficiently. They are often used on flanged connections to prevent leaks in pumps, hydraulic systems, compressors, and other pressurized lines. The flexible rubber or plastic layer compresses to fills gaps, while the metal backing stops the washer from squeezing through the hole.
    For Screw Heads and Nuts
    Image of ProductInUse. Front orientation. CrossSection view. Sealing Washers. High-Pressure Bonded Sealing Washers, For Screw Heads and Nuts.
    Image of Product. Front orientation. Sealing Washers. High-Pressure Bonded Sealing Washers, For Screw Heads and Nuts.
    Install these washers under screw heads and nuts. When compressed, the PVC sealant squeezes into every crevice, creating an impervious 360° seal that stops liquids or gases from trickling along the length of the screw. These washers are not reusable.
    18-8 Stainless Steel and PVC—The PVC sealant resists acids, alcohols, solvents, and detergents. However, the metal is more likely to rust than 316 stainless steel.
    Chemical-Resistant 316 Stainless Steel and PVC—Every part of these washers resists acids, alcohols, solvents, and other aggressive substances. They are commonly used in harsh environments, such chemical processing plants.
    Max.
    Pressure, psi, psi
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    For
    Fluids
    For
    Gases
    Min.
    Max.
    Color
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel and PVC
    No. 6
    		0.148"0.495"0.06" to 0.07"8,5008,500-60270Black2590736A120000000
    No. 8
    		0.175"0.495"0.06" to 0.07"8,5008,500-60270Black2590736A13000000
    No. 10
    		0.205"0.56"0.06" to 0.07"8,5008,500-60270Black2590736A14000000
    1/4"
    		0.255"0.625"0.068" to 0.078"8,5008,500-60270Black1090736A1500000
    5/16"
    		0.315"0.685"0.072" to 0.082"8,5008,500-60270Black1090736A1600000
    3/8"
    		0.385"0.81"0.077" to 0.087"8,5008,500-60270Black1090736A1700000
    7/16"
    		0.445"0.89"0.085" to 0.095"8,5008,500-60270Black590736A1800000
    1/2"
    		0.51"0.99"0.085" to 0.095"8,5008,500-60270Black590736A1900000
     
    Chemical-Resistant 316 Stainless Steel and PVC
    No. 4
    		0.124"0.396"0.05" to 0.06"8,5008,500-60270Black2094154A0050000
    No. 6
    		0.148"0.495"0.06" to 0.07"8,5008,500-60270Black2094154A1000000
    No. 8
    		0.175"0.495"0.06" to 0.07"8,5008,500-60270Black2094154A2000000
    No. 10
    		0.205"0.56"0.06" to 0.07"8,5008,500-60270Black2094154A3000000
    1/4"
    		0.255"0.625"0.068" to 0.078"8,5008,500-60270Black1594154A4000000
    5/16"
    		0.315"0.685"0.072" to 0.082"8,5008,500-60270Black1594154A5000000
    3/8"
    		0.385"0.81"0.077" to 0.087"8,5008,500-60270Black1094154A6000000
    1/2"
    		0.51"0.99"0.085" to 0.095"8,5008,500-60270Black594154A8000000
    5/8"
    		0.639"1.135"0.085" to 0.095"8,5008,500-60270Black194154A8050000
    3/4"
    		0.77"1.28"0.105" to 0.115"8,5008,500-60270Black194154A8100000
    7/8"
    		0.893"1.44"0.105" to 0.115"8,5008,500-60270Black194154A8150000
    1"
    		1.018"1.6"0.105" to 0.115"8,5008,500-60270Black194154A8200000
     

    Plastic Washers

    Image of Product. Front orientation. Washers. Plastic Washers.
    All of these washers are lightweight, nonconductive, and naturally rust resistant. They are commonly used in electronics and automation applications to take the pressure off screws and nuts and protect mounting surfaces.
    Acid-Resistant PVC—A great choice for chemical-processing lines, these washers won't degrade when exposed to harsh acids, alkalis, and alcohols. They are also good electrical insulators.
    Temp.
    Range
    For Screw
    Size
    ID
    OD
    Thk.
    Min.
    Max.,
    ° F
    Color
    Pkg.
    Qty.
    Pkg.
    Acid-Resistant PVC
    No. 2
    		0.090"0.250"0.025" to 0.035"Not Rated140Gray10095611A211000000
    No. 3
    		0.109"0.250"0.025" to 0.035"Not Rated140Gray10095611A21200000
    No. 4
    		0.125"0.250"0.025" to 0.035"Not Rated140Gray10095611A21300000
    No. 5
    		0.141"0.375"0.025" to 0.035"Not Rated140Gray5095611A21400000
    No. 5
    		0.141"0.500"0.025" to 0.035"Not Rated140Gray2595611A2150000
    No. 6
    		0.156"0.312"0.025" to 0.035"Not Rated140Gray5095611A2170000
    No. 6
    		0.156"0.562"0.025" to 0.035"Not Rated140Gray2595611A21900000
    No. 6
    		0.156"0.750"0.025" to 0.035"Not Rated140Gray2595611A22100000
    No. 6
    		0.156"1.000"0.025" to 0.035"Not Rated140Gray1095611A22200000
    No. 8
    		0.188"0.375"0.025" to 0.035"Not Rated140Gray5095611A22300000
    No. 8
    		0.188"0.500"0.025" to 0.035"Not Rated140Gray2595611A2240000
    No. 8
    		0.188"1.000"0.025" to 0.035"Not Rated140Gray1095611A22500000
    No. 8
    		0.188"1.000"0.053" to 0.071"Not Rated140Gray595611A2260000
    No. 10
    		0.203"0.438"0.025" to 0.035"Not Rated140Gray5095611A22700000
    No. 10
    		0.203"0.562"0.025" to 0.035"Not Rated140Gray2595611A2280000
    No. 10
    		0.203"1.000"0.025" to 0.035"Not Rated140Gray1095611A22900000
    No. 10
    		0.203"1.000"0.053" to 0.071"Not Rated140Gray595611A2310000
    No. 10
    		0.203"1.250"0.053" to 0.071"Not Rated140Gray1095611A2330000
    No. 12
    		0.234"0.500"0.025" to 0.035"Not Rated140Gray2595611A2360000
    No. 12
    		0.234"1.000"0.025" to 0.035"Not Rated140Gray1095611A23700000
    No. 12
    		0.234"1.000"0.053" to 0.071"Not Rated140Gray595611A2380000
    No. 12
    		0.234"1.250"0.053" to 0.071"Not Rated140Gray1095611A2410000
    1/4"
    		0.265"0.500"0.025" to 0.035"Not Rated140Gray2595611A2440000
    1/4"
    		0.265"0.625"0.025" to 0.035"Not Rated140Gray2595611A24500000
    1/4"
    		0.265"0.625"0.053" to 0.071"Not Rated140Gray2595611A2460000
    1/4"
    		0.281"0.625"0.025" to 0.035"Not Rated140Gray2595611A24700000
    1/4"
    		0.281"0.625"0.053" to 0.071"Not Rated140Gray5095611A24800000
    1/4"
    		0.281"0.750"0.053" to 0.071"Not Rated140Gray5095611A24900000
    1/4"
    		0.281"1.000"0.025" to 0.035"Not Rated140Gray1095611A25100000
    1/4"
    		0.281"1.000"0.053" to 0.071"Not Rated140Gray595611A2520000
    1/4"
    		0.281"1.250"0.053" to 0.071"Not Rated140Gray1095611A2540000
    1/4"
    		0.281"1.500"0.053" to 0.071"Not Rated140Gray595611A2560000
    1/4"
    		0.312"0.750"0.053" to 0.071"Not Rated140Gray5095611A02900000
    5/16"
    		0.344"0.875"0.053" to 0.071"Not Rated140Gray5095611A25700000
    5/16"
    		0.344"0.875"0.084" to 0.102"Not Rated140Gray2595611A25800000
    5/16"
    		0.344"1.000"0.053" to 0.071"Not Rated140Gray2595611A25900000
    5/16"
    		0.344"1.250"0.053" to 0.071"Not Rated140Gray1095611A2610000
    5/16"
    		0.375"0.875"0.053" to 0.071"Not Rated140Gray5095611A03000000
    3/8"
    		0.406"0.734"0.056" to 0.071"Not Rated140Gray5095611A40300000
    3/8"
    		0.406"0.875"0.053" to 0.071"Not Rated140Gray2595611A2620000
    3/8"
    		0.406"1.000"0.053" to 0.071"Not Rated140Gray2595611A26300000
    3/8"
    		0.406"1.250"0.053" to 0.071"Not Rated140Gray1095611A2640000
    3/8"
    		0.406"1.500"0.053" to 0.071"Not Rated140Gray595611A2650000
    3/8"
    		0.406"1.500"0.084" to 0.102"Not Rated140Gray1095611A26800000
    3/8"
    		0.406"1.500"0.112" to 0.138"Not Rated140Gray1095611A27200000
    3/8"
    		0.406"1.750"0.053" to 0.071"Not Rated140Gray595611A2660000
    3/8"
    		0.406"1.750"0.084" to 0.102"Not Rated140Gray595611A2690000
    3/8"
    		0.406"1.750"0.112" to 0.138"Not Rated140Gray595611A27300000
    3/8"
    		0.406"2.000"0.084" to 0.102"Not Rated140Gray595611A27100000
    3/8"
    		0.406"2.000"0.112" to 0.138"Not Rated140Gray595611A27400000
    3/8"
    		0.438"1.000"0.053" to 0.071"Not Rated140Gray5095611A03100000
    7/16"
    		0.500"1.125"0.053" to 0.071"Not Rated140Gray1095611A2750000
    7/16"
    		0.500"1.250"0.084" to 0.102"Not Rated140Gray1095611A2760000
    1/2"
    		0.531"1.000"0.025" to 0.035"Not Rated140Gray1095611A27700000
    1/2"
    		0.531"1.000"0.053" to 0.071"Not Rated140Gray2595611A27800000
    1/2"
    		0.531"1.000"0.084" to 0.102"Not Rated140Gray2595611A27900000
    1/2"
    		0.531"1.062"0.084" to 0.102"Not Rated140Gray1095611A4010000
    1/2"
    		0.531"1.250"0.053" to 0.071"Not Rated140Gray1095611A2810000
    1/2"
    		0.531"1.250"0.084" to 0.102"Not Rated140Gray1095611A2820000
    1/2"
    		0.562"1.250"0.053" to 0.071"Not Rated140Gray5095611A03300000
    1/2"
    		0.562"1.250"0.084" to 0.102"Not Rated140Gray1095611A2830000
    1/2"
    		0.562"1.375"0.084" to 0.102"Not Rated140Gray1095611A40200000
    1/2"
    		0.562"1.500"0.053" to 0.071"Not Rated140Gray595611A2840000
    1/2"
    		0.562"1.500"0.084" to 0.102"Not Rated140Gray1095611A28500000
    1/2"
    		0.562"1.500"0.112" to 0.138"Not Rated140Gray1095611A28600000
    1/2"
    		0.562"1.750"0.112" to 0.138"Not Rated140Gray595611A28900000
    1/2"
    		0.562"2.000"0.053" to 0.071"Not Rated140Gray595611A29100000
    1/2"
    		0.562"2.000"0.084" to 0.102"Not Rated140Gray595611A29200000
    1/2"
    		0.562"2.000"0.112" to 0.138"Not Rated140Gray595611A29300000
    9/16"
    		0.578"1.250"0.053" to 0.071"Not Rated140Gray1095611A2940000
    5/8"
    		0.655"1.500"0.053" to 0.071"Not Rated140Gray1095611A29500000
    5/8"
    		0.656"1.250"0.084" to 0.102"Not Rated140Gray1095611A40400000
    5/8"
    		0.656"1.500"0.084" to 0.102"Not Rated140Gray1095611A29600000
    5/8"
    		0.656"1.625"0.112" to 0.138"Not Rated140Gray595611A29700000
    5/8"
    		0.656"1.750"0.084" to 0.102"Not Rated140Gray1095611A40500000
    5/8"
    		0.656"2.000"0.112" to 0.138"Not Rated140Gray595611A30100000
    5/8"
    		0.656"2.250"0.053" to 0.071"Not Rated140Gray595611A30200000
    5/8"
    		0.688"1.500"0.112" to 0.138"Not Rated140Gray2595611A03700000
    3/4"
    		0.812"1.500"0.053" to 0.071"Not Rated140Gray1095611A30800000
    3/4"
    		0.812"1.500"0.084" to 0.102"Not Rated140Gray2595611A03800000
    3/4"
    		0.812"1.750"0.053" to 0.071"Not Rated140Gray1095611A30900000
    3/4"
    		0.812"2.000"0.084" to 0.102"Not Rated140Gray595611A31200000
    3/4"
    		0.812"2.250"0.084" to 0.102"Not Rated140Gray595611A31400000
    3/4"
    		0.812"2.500"0.053" to 0.071"Not Rated140Gray195611A3160000
    3/4"
    		0.812"3.000"0.053" to 0.071"Not Rated140Gray195611A3190000
    3/4"
    		0.812"3.000"0.084" to 0.102"Not Rated140Gray195611A3210000
    7/8"
    		0.891"1.750"0.084" to 0.102"Not Rated140Gray195611A1510000
    7/8"
    		0.937"2.000"0.084" to 0.102"Not Rated140Gray595611A3240000
    7/8"
    		0.937"2.000"0.112" to 0.138"Not Rated140Gray595611A3250000
    1"
    		1.062"2.000"0.084" to 0.102"Not Rated140Gray595611A3330000
    1"
    		1.062"2.000"0.112" to 0.138"Not Rated140Gray595611A3340000
    1"
    		1.062"2.500"0.053" to 0.071"Not Rated140Gray195611A3350000
    1"
    		1.062"3.000"0.112" to 0.138"Not Rated140Gray195611A34100000
    1 1/8"
    		1.250"2.250"0.084" to 0.104"Not Rated140Gray195611A1530000
    1 1/4"
    		1.312"3.000"0.112" to 0.138"Not Rated140Gray195611A34200000
    1 1/4"
    		1.375"2.500"0.112" to 0.138"Not Rated140Gray195611A1540000
    1 1/2"
    		1.625"3.000"0.112" to 0.139"Not Rated140Gray195611A1550000
    M2
    		2.1 mm5.0 mm0.7 mm to 0.9 mmNot Rated140Gray1095611A1020000
    M2.5
    		2.7 mm6.0 mm0.7 mm to 0.9 mmNot Rated140Gray1095611A14100000
    M3.5
    		3.7 mm7.0 mm0.7 mm to 0.9 mmNot Rated140Gray1095611A14200000
    M7
    		7.2 mm16.0 mm0.7 mm to 0.9 mmNot Rated140Gray1095611A14300000
    M14
    		15.0 mm24.0 mm0.7 mm to 0.9 mmNot Rated140Gray595611A1440000
    M16
    		17.0 mm30.0 mm2.8 mm to 3.5 mmNot Rated140Gray595611A1060000
    M18
    		19.0 mm34.0 mm2.8 mm to 3.5 mmNot Rated140Gray595611A1450000
    M20
    		21.0 mm37.0 mm1.3 mm to 1.7 mmNot Rated140Gray595611A1460000
    M20
    		21.0 mm37.0 mm2.8 mm to 3.5 mmNot Rated140Gray595611A1210000
    M22
    		23.0 mm40.0 mm1.3 mm to 1.7 mmNot Rated140Gray595611A14700000
    M24
    		25.0 mm42.0 mm1.3 mm to 1.7 mmNot Rated140Gray595611A14800000
     

    Shims

    Image of Product. Front orientation. Shims. Round, Sold Individually.
    With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Color-Coded Plastic—These shims are color coded by thickness to quickly spot and grab the right size every time. Softer than metal, they won't mar delicate surfaces and they will never rust.
    Thk.
    Thk. Tolerance
    ID
    Tolerance
    OD Tolerance
    Color
    Pkg.
    Qty.
    Pkg.
    Color-Coded Plastic
     
    3/8" ID × 5/8" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A135000000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A14000000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A14500000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A15000000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A15500000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A16000000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A16500000
     
    1/2" ID × 3/4" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A21500000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A22000000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A22500000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A23000000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A23500000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A24000000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A24500000
     
    5/8" ID × 1" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A28500000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A29000000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A29500000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A30000000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A30500000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A31000000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A31500000
     
    3/4" ID × 1 1/8" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A35500000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A36000000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A36500000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A37000000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A37500000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A38000000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A38500000
     
    1" ID × 1 1/2" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A49500000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A50000000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A50500000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A51000000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A51500000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A52000000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A52500000
     
    1 1/4" ID × 1 3/4" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A64000000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A64500000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A65000000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A65500000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A66000000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A66500000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A67000000
     
    1 1/2" ID × 2 1/8" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A78000000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A78500000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A79000000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A79500000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A80000000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A80500000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A81000000
     
    1 3/4" ID × 2 3/4" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A85000000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A85500000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A86000000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A86500000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A87000000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A87500000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A88000000
     
    2" ID × 2 3/4" OD
    0.0075"-0.0004" to 0.0004"0" to 0.015"-0.005" to 0.005"Gray1098090A92000000
    0.01"-0.0005" to 0.0005"0" to 0.015"-0.005" to 0.005"Brown1098090A92500000
    0.0125"-0.00063" to 0.00063"0" to 0.015"-0.005" to 0.005"Black1098090A93000000
    0.015"-0.00075" to 0.00075"0" to 0.015"-0.005" to 0.005"Pink1098090A93500000
    0.02"-0.001" to 0.001"0" to 0.015"-0.005" to 0.005"Yellow1098090A94000000
    0.025"-0.00125" to 0.00125"0" to 0.015"-0.005" to 0.005"White1098090A94500000
    0.03"-0.0015" to 0.0015"0" to 0.015"-0.005" to 0.005"Coral1098090A95000000
     

    Shim Assortments

    Image of Product. Front orientation. Shims. Round, Sold as Assortments.
    When you don’t know the exact shim thickness you’ll need, keep multiple shim thicknesses on hand so you always have the right one. With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Color-Coded Plastic—These shims are color coded by thickness to quickly spot and grab the right size every time. Softer than metal, they won't mar delicate surfaces and they will never rust.
    No. of
    Pieces
    ID × OD Included
    Thicknesses Included
    Each
    Color-Coded Plastic
    133/8" ID × 5/8" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A955000000
    131/2" ID × 3/4" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A95800000
    135/8" ID × 1" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A96100000
    133/4" ID × 1 1/8" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A96400000
    131" ID × 1 1/2" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A97100000
    131 1/4" ID × 1 3/4" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A98300000
    131 1/2" ID × 2 1/8" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A98900000
    131 3/4" ID × 2 3/4" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A99100000
    132" ID × 2 3/4" OD0.0015”, 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.0075”, 0.010”, 0.0125”, 0.0150”, 0.020”, 0.025”, 0.030”98090A99400000
     
    back to top