Quick-Change Boring and Turning Cartridges

Filter by

Cut Type

Insert Shape

Insert Code

Overall Length

Cutting Direction

Length

Insert Designation

Cartridge OD

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Insert Inscribed Circle Diameter (IC)

Cutting Edge Angle

Insert Nose Angle

Insert Holder Code

Insert Relief Angle

Hole Diameter

Insert Thickness

REACH

Machine Taper Number

Diameter

Overall Diameter

Usable Length

Help me decide (beta)

69 Products

...

Quick-Change Boring and Turning Cartridges

Limit downtime when you’re changing out cutting tools. Rather than removing and replacing an insert while your lathe is stopped, just swap out these cartridges and get right back to work. While one cartridge is in use, you can replace the insert in another, so a fresh cutting tool is always ready to go.

Pair these cartridges with a lathe tool insert and connect them to your lathe with either a quick-change cartridge holder or boring bar (each sold separately). Cartridge holders mount to quick-change lathe systems, also known as Capto, while boring bars mount with round shank toolholders. All components are coolant-through compatible. They have a hole that delivers coolant from your lathe onto the workpiece to minimize heat.

Boring Cartridges with SCLC Holders—For CCMT Inserts


Boring Cartridges with SCLC Holders—For CCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	0.92"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N15	0000000


		1"	1.185"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N16	000000
		1 1/4"	1.465"	2 1/8"	95°	1/2"	0.187"	Coolant Hole	Arch Cutting Tools	9181N19	000000
		1 1/2"	1.73"	2 1/2"	95°	1/2"	0.187"	Coolant Hole	Arch Cutting Tools	9181N21	000000
		1 3/4"	2"	2 7/8"	95°	1/2"	0.187"	Coolant Hole	Arch Cutting Tools	9181N22	000000
		2"	2.4"	3 3/8"	95°	1/2"	0.187"	Coolant Hole	Arch Cutting Tools	9181N23	000000


		Left-Hand Cutting Direction



				3/4"	0.92"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N11	000000


				1"	1.185"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N12	000000

Accessories for Holders

Boring Bars

For Cartridge OD	Shank Dia.	Overall Lg.	Specs. Met		Each
3/4"	3/4"	9 1/2"	ISO 26623-1	7944N11	0000000
1"	1"	11 1/2"	ISO 26623-1	7944N12	000000
1 1/4"	1 1/4"	14"	ISO 26623-1	7944N13	000000
1 1/2"	1 1/2"	14"	ISO 26623-1	7944N14	000000
1 3/4"	1 3/4"	16"	ISO 26623-1	7944N15	000000
2"	2"	10"	ISO 26623-1	7944N16	000000
2"	2"	20"	ISO 26623-1	7944N17	000000
2"	2 1/2"	12"	ISO 26623-1	7944N18	000000
2"	2 1/2"	24"	ISO 26623-1	7944N19	000000
2"	3"	28"	ISO 26623-1	7944N21	00000000

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000
1 1/4"	Capto C4, PSC-40	95	40	140	8935N13	000000
1 1/4"	Capto C5, PSC-50	95	50	145	8935N16	000000
1 1/4"	Capto C6, PSC-63	98	63	158	8935N18	000000
1 1/2"	Capto C5, PSC-50	115	50	165	8935N17	000000
1 1/2"	Capto C6, PSC-63	118	63	178	8935N19	000000
2"	Capto C6, PSC-63	153	63	213	8935N21	000000

Boring Cartridges with SCLC Holders—For CPMT Inserts


Boring Cartridges with SCLC Holders—For CCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	0.92"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N17	0000000


		1"	1.185"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N18	000000


		Left-Hand Cutting Direction



				3/4"	0.92"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N13	000000


				1"	1.185"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N14	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Boring Cartridges with SSKC Holders—For SCMT Inserts


Boring Cartridges with SSKC Holders—For SCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)	Right-Hand Cutting Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	0.92"	1 3/8"	75°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N24	0000000


		1"	1.185"	1 5/8"	75°	1/2"	0.187"	Coolant Hole	Arch Cutting Tools	9181N25	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Boring Cartridges with STFC Holders—For TCMT Inserts


Boring Cartridges with STFC Holders—For TCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	0.92"	1 3/8"	90°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N37	0000000


		1"	1.185"	1 5/8"	90°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N38	000000


		Left-Hand Cutting Direction



				3/4"	0.92"	1 3/8"	90°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N35	000000


				1"	1.185"	1 5/8"	90°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N36	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Boring Cartridges with STUC Holders—For TCMT Inserts


Boring Cartridges with STUC Holders—For TCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	0.92"	1 3/8"	93°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N33	0000000


		1"	1.185"	1 5/8"	93°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N34	000000


		Left-Hand Cutting Direction



				3/4"	0.92"	1 3/8"	93°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N31	000000


				1"	1.185"	1 5/8"	93°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N32	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Boring Cartridges with SWLC Holders—For WCMT Inserts


Boring Cartridges with SWLC Holders—For WCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	0.92"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N28	0000000


		1"	1.185"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N29	000000


		Left-Hand Cutting Direction



				3/4"	0.92"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N26	000000


				1"	1.185"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N27	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Boring and Internal Profiling Cartridges with SDNC Holders—For DCMT Inserts


Boring and Internal Profiling Cartridges with SDNC Holders—For DCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)	Right-Hand Cutting Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	1.19"	1 1/2"	62.5°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N54	0000000


		1"	1.45"	1 5/8"	62.5°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N55	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Boring and Internal Profiling Cartridges with SDQC Holders—For DCMT Inserts


Boring and Internal Profiling Cartridges with SDQC Holders—For DCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	1"	1 3/8"	107.5°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N58	0000000


		1"	1.185"	1 5/8"	107.5°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N59	000000


		Left-Hand Cutting Direction



				3/4"	1"	1 3/8"	107.5°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N56	000000


				1"	1.185"	1 5/8"	107.5°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N57	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Boring and Internal Profiling Cartridges with SDUC Holders—For DCMT Inserts


Boring and Internal Profiling Cartridges with SDUC Holders—For DCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	1.05"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N46	0000000


		1"	1.31"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N47	000000
		1 1/4"	1.5"	2 1/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N48	000000
		1 1/4"	1.7"	2 1/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N49	000000
		1 1/2"	1.96"	2 1/2"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N51	000000
		1 3/4"	2.23"	2 7/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N52	000000
		2"	2.5"	3 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N53	000000


		Left-Hand Cutting Direction



				3/4"	1.05"	1 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N39	000000


				1"	1.31"	1 5/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N41	000000
				1 1/4"	1.7"	2 1/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N42	000000
				1 1/2"	1.96"	2 1/2"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N43	000000
				1 3/4"	2.23"	2 7/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N44	000000
				2"	2.5"	3 3/8"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N45	000000

Accessories for Holders

Boring Bars

For Cartridge OD	Shank Dia.	Overall Lg.	Specs. Met		Each
3/4"	3/4"	9 1/2"	ISO 26623-1	7944N11	0000000
1"	1"	11 1/2"	ISO 26623-1	7944N12	000000
1 1/4"	1 1/4"	14"	ISO 26623-1	7944N13	000000
1 1/2"	1 1/2"	14"	ISO 26623-1	7944N14	000000
1 3/4"	1 3/4"	16"	ISO 26623-1	7944N15	000000
2"	2"	10"	ISO 26623-1	7944N16	000000
2"	2"	20"	ISO 26623-1	7944N17	000000
2"	2 1/2"	12"	ISO 26623-1	7944N18	000000
2"	2 1/2"	24"	ISO 26623-1	7944N19	000000
2"	3"	28"	ISO 26623-1	7944N21	00000000

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000
1 1/4"	Capto C4, PSC-40	95	40	140	8935N13	000000
1 1/4"	Capto C5, PSC-50	95	50	145	8935N16	000000
1 1/4"	Capto C6, PSC-63	98	63	158	8935N18	000000
1 1/2"	Capto C5, PSC-50	115	50	165	8935N17	000000
1 1/2"	Capto C6, PSC-63	118	63	178	8935N19	000000
2"	Capto C6, PSC-63	153	63	213	8935N21	000000

Back Boring Cartridges with SDXC Holders—For DCMT Inserts


Back Boring Cartridges with SDXC Holders—For DCMT Inserts	Boring Bars (Sold Separately) test	Pyramid-Shaped Shank	Cartridge Holders (Sold Separately)

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

Back-boring cartridges pass through an existing hole to enlarge it from the back of the workpiece, rather than enlarging the hole as they enter. They are commonly used to make pipe fittings and hydraulic cylinders.

Right-Hand Cutting Direction—Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you.

Left-Hand Cutting Direction—Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

					For Insert
	Cartridge OD	Min. Hole Dia.	Overall Lg.	Cutting Edge Angle	IC Dia.	Thk.	Features	Mfr.		Each
Right-Hand Cutting Direction



		3/4"	1.05"	1 1/2"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N63	0000000


		1"	1.31"	1 3/4"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N64	000000


		Left-Hand Cutting Direction



				3/4"	1.05"	1 1/2"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N61	000000


				1"	1.31"	1 3/4"	95°	3/8"	0.156"	Coolant Hole	Arch Cutting Tools	9181N62	000000

Accessories for Holders

Cartridge Holders

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.		Each
3/4"	Capto C4, PSC-40	55	40	100	8935N11	0000000
3/4"	Capto C5, PSC-50	55	50	105	8935N14	000000
1"	Capto C4, PSC-40	80	40	125	8935N12	000000
1"	Capto C5, PSC-50	80	50	130	8935N15	000000

Quick-Change Boring and Turning Cartridge Holders


Pyramid-Shaped Shank	Boring and Internal Profiling Cartridges with SDQC Holders—For DCMT Inserts	Back Boring Cartridges with SDXC Holders—For DCMT Inserts	Boring Cartridges with SSKC Holders—For SCMT Inserts	Boring and Internal Profiling Cartridges with SDNC Holders—For DCMT Inserts	Boring and Internal Profiling Cartridges with SDUC Holders—For DCMT Inserts

Boring Cartridges with SWLC Holders—For WCMT Inserts	Boring Cartridges with STUC Holders—For TCMT Inserts	Boring Cartridges with STFC Holders—For TCMT Inserts	Boring Cartridges with SCLC Holders—For CCMT Inserts	Boring Cartridges with SCLC Holders—For CPMT Inserts	Cartridge Holders

Right-Hand

Cutting

Direction

Left-Hand

Cutting

Direction

A pyramid-shaped shank makes these holders easier to switch in or out of your lathe than round-shank holders. They meet ISO 26623 for compatibility with quick-change systems. Quick-change systems are also known as Capto or PSC. Since these holders form a rigid connection with lathes, they’re often used for precision turning. Rather than removing and replacing an insert while your lathe is stopped, just swap out the cartridge (sold separately) and get right back to work. While one cartridge is in use, you can replace the insert on another, so a fresh cutting tool is always ready to go. Both holders and cartridges have a hole that passes coolant from your lathe onto the workpiece, minimizing heat. Pair the cartridges with carbide inserts.

Use right-hand cartridges when the workpiece is rotating counterclockwise, or toward you. Use left-hand cartridges when the workpiece rotates clockwise, or away from you.

Cutting Edge Angle—Cutting edge angle is also known as lead angle, entering angle, or KAPR.

			Overall, mm
For Cartridge OD	For Machine Taper No.	Usable Lg., mm	Dia.	Lg.	Material	Features	Mfr.		Each



	3/4"	Capto C4, PSC-40	55	40	100	Steel	Coolant Hole	Arch Cutting Tools	8935N11	0000000


	3/4"	Capto C5, PSC-50	55	50	105	Steel	Coolant Hole	Arch Cutting Tools	8935N14	000000
	1"	Capto C4, PSC-40	80	40	125	Steel	Coolant Hole	Arch Cutting Tools	8935N12	000000
	1"	Capto C5, PSC-50	80	50	130	Steel	Coolant Hole	Arch Cutting Tools	8935N15	000000
	1 1/4"	Capto C4, PSC-40	95	40	140	Steel	Coolant Hole	Arch Cutting Tools	8935N13	000000
	1 1/4"	Capto C5, PSC-50	95	50	145	Steel	Coolant Hole	Arch Cutting Tools	8935N16	000000
	1 1/4"	Capto C6, PSC-63	98	63	158	Steel	Coolant Hole	Arch Cutting Tools	8935N18	000000
	1 1/2"	Capto C5, PSC-50	115	50	165	Steel	Coolant Hole	Arch Cutting Tools	8935N17	000000
	1 1/2"	Capto C6, PSC-63	118	63	178	Steel	Coolant Hole	Arch Cutting Tools	8935N19	000000
	2"	Capto C6, PSC-63	153	63	213	Steel	Coolant Hole	Arch Cutting Tools	8935N21	000000

Cartridges

			For Insert
	Cartridge OD	Min. Hole Dia.	Thk.	IC Dia.	Overall Lg.	Cutting Edge Angle	Material		Each
Boring Cartridges with SCLC Insert Holder—For CCMT Inserts







				Right-Hand Cutting Direction

				3/4"	0.92"	0.156"	3/8"	1 3/8"	95°	Steel	9181N15	0000000


				1"	1.185"	0.156"	3/8"	1 5/8"	95°	Steel	9181N16	000000
				1 1/4"	1.465"	0.187"	1/2"	2 1/8"	95°	Steel	9181N19	000000
				1 1/2"	1.73"	0.187"	1/2"	2 1/2"	95°	Steel	9181N21	000000
				2"	2.4"	0.187"	1/2"	3 3/8"	95°	Steel	9181N23	000000




						Left-Hand Cutting Direction

						3/4"	0.92"	0.156"	3/8"	1 3/8"	95°	Steel	9181N11	000000


						1"	1.185"	0.156"	3/8"	1 5/8"	95°	Steel	9181N12	000000


						Boring Cartridges with SCLC Insert Holder—For CPMT Inserts







										Right-Hand Cutting Direction

										3/4"	0.92"	0.156"	3/8"	1 3/8"	95°	Steel	9181N17	000000


										1"	1.185"	0.156"	3/8"	1 5/8"	95°	Steel	9181N18	000000




												Left-Hand Cutting Direction

												3/4"	0.92"	0.156"	3/8"	1 3/8"	95°	Steel	9181N13	000000


												1"	1.185"	0.156"	3/8"	1 5/8"	95°	Steel	9181N14	000000


												Boring Cartridges with SSKC Insert Holder—For SCMT Inserts







																Right-Hand Cutting Direction

3/4"																0.92"	0.156"	3/8"	1 3/8"	75°	Steel	9181N24	000000


1"	1.185"															0.187"	1/2"	1 5/8"	75°	Steel	9181N25	000000


Boring Cartridges with STFC Insert Holder—For TCMT Inserts







																Right-Hand Cutting Direction

																3/4"	0.92"	0.156"	3/8"	1 3/8"	90°	Steel	9181N37	000000


				1"												1.185"	0.156"	3/8"	1 5/8"	90°	Steel	9181N38	000000




																Left-Hand Cutting Direction

																3/4"	0.92"	0.156"	3/8"	1 3/8"	90°	Steel	9181N35	000000


																1"	1.185"	0.156"	3/8"	1 5/8"	90°	Steel	9181N36	000000


						Boring Cartridges with STUC Insert Holder—For TCMT Inserts







																Right-Hand Cutting Direction

																3/4"	0.92"	0.156"	3/8"	1 3/8"	93°	Steel	9181N33	000000


										1"						1.185"	0.156"	3/8"	1 5/8"	93°	Steel	9181N34	000000




																Left-Hand Cutting Direction

																3/4"	0.92"	0.156"	3/8"	1 3/8"	93°	Steel	9181N31	000000


																1"	1.185"	0.156"	3/8"	1 5/8"	93°	Steel	9181N32	000000


												Boring Cartridges with SWLC Insert Holder—For WCMT Inserts







																Right-Hand Cutting Direction

																3/4"	0.92"	0.156"	3/8"	1 3/8"	95°	Steel	9181N28	000000


1"																1.185"	0.156"	3/8"	1 5/8"	95°	Steel	9181N29	000000




		Left-Hand Cutting Direction

		3/4"	0.92"													0.156"	3/8"	1 3/8"	95°	Steel	9181N26	000000


		1"	1.185"													0.156"	3/8"	1 5/8"	95°	Steel	9181N27	000000


		Boring and Internal Profiling Cartridges with SDNC Insert Holder—For DCMT Inserts







																Right-Hand Cutting Direction

																3/4"	1.19"	0.156"	3/8"	1 1/2"	62.5°	Steel	9181N54	000000


																1"	1.45"	0.156"	3/8"	1 5/8"	62.5°	Steel	9181N55	000000


						Boring and Internal Profiling Cartridges with SDQC Insert Holder—For DCMT Inserts







																Right-Hand Cutting Direction

																3/4"	1"	0.156"	3/8"	1 3/8"	107.5°	Steel	9181N58	000000


																1"	1.185"	0.156"	3/8"	1 5/8"	107.5°	Steel	9181N59	000000




																Left-Hand Cutting Direction

																3/4"	1"	0.156"	3/8"	1 3/8"	107.5°	Steel	9181N56	000000


																1"	1.185"	0.156"	3/8"	1 5/8"	107.5°	Steel	9181N57	000000


												Boring and Internal Profiling Cartridges with SDUC Insert Holder—For DCMT Inserts







																Right-Hand Cutting Direction

																3/4"	1.05"	0.156"	3/8"	1 3/8"	95°	Steel	9181N46	000000


1"	1.31"															0.156"	3/8"	1 5/8"	95°	Steel	9181N47	000000
1 1/4"	1.5"															0.156"	3/8"	2 1/8"	95°	Steel	9181N48	000000
1 1/4"	1.7"															0.156"	3/8"	2 1/8"	95°	Steel	9181N49	000000
1 1/2"	1.96"															0.156"	3/8"	2 1/2"	95°	Steel	9181N51	000000
2"	2.5"															0.156"	3/8"	3 3/8"	95°	Steel	9181N53	000000




																Left-Hand Cutting Direction

		3/4"	1.05"													0.156"	3/8"	1 3/8"	95°	Steel	9181N39	000000


		1"	1.31"													0.156"	3/8"	1 5/8"	95°	Steel	9181N41	000000
		1 1/4"	1.7"	0.156"												3/8"	2 1/8"	95°	Steel	9181N42	000000
		1 1/2"	1.96"	0.156"	3/8"											2 1/2"	95°	Steel	9181N43	000000
		2"	2.5"	0.156"	3/8"											3 3/8"	95°	Steel	9181N45	000000


		Back Boring Cartridges with SDXC Insert Holder—For DCMT Inserts







						Right-Hand Cutting Direction

						3/4"	1.05"									0.156"	3/8"	1 1/2"	95°	Steel	9181N63	000000


						1"	1.31"	0.156"								3/8"	1 3/4"	95°	Steel	9181N64	000000




								Left-Hand Cutting Direction

								3/4"	1.05"							0.156"	3/8"	1 1/2"	95°	Steel	9181N61	000000


								1"	1.31"							0.156"	3/8"	1 3/4"	95°	Steel	9181N62	000000