Trigger-Action Bar Clamps/Spreaders
Reverse the arms to use these clamps as spreaders. Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.
Opening | Spreader Opening | ||||||
|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | Reach | Body Material | Each | |
300 lbs. Holding Capacity | |||||||
| 6" | 0" | 12 1/2" | 7 1/2" | 2 1/4" | Steel | 0000000 | 000000 |
| 12" | 0" | 18 1/2" | 7 1/2" | 2 1/4" | Steel | 0000000 | 00000 |
| 18" | 0" | 24 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
| 24" | 0" | 30 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
| 36" | 0" | 42 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
600 lbs. Holding Capacity | |||||||
| 6" | 0" | 14 7/8" | 9 1/4" | 3 5/8" | Steel | 00000000 | 00000 |
| 12" | 0" | 20 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 18" | 0" | 26 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 24" | 0" | 32 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 36" | 0" | 44 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 50" | 0" | 58 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
Parallel-Jaw Bar Clamps/Spreaders
The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Reverse the arms to use these clamps as spreaders. Pull the handle to lock or release the clamping arm.
Opening | Spreader Opening | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 12" | 0" | 15 5/16" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 000000 |
| 18" | 0" | 21 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 24" | 0" | 28 3/4" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 40" | 0" | 44 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 50" | 0" | 52 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
Fast-Action Bar Clamps/Spreaders
Each arm slides freely for quick, one-handed positioning. They lock when the screws are tightened onto a workpiece. Reverse the arms to use these clamps as spreaders.
Trigger-Action Bar Clamps
Fast-Action Bar Clamps
The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These clamps are also known as F- or L-clamps.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 4" | 0" | 2 1/4" | 400 | Zinc-Plated Steel | 0000000 | 000000 |
| 6" | 0" | 4 3/4" | 1,330 | Zinc-Plated Steel | 0000000 | 00000 |
| 8" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 00000 |
| 9" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 00000000 | 00000 |
| 10" | 0" | 4 3/4" | 1,000 | Zinc-Plated Steel | 00000000 | 00000 |
| 12" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 12" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
| 16" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 18" | 0" | 4 3/4" | 1,980 | Zinc-Plated Steel | 00000000 | 000000 |
| 20" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 24" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 24" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
| 36" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
| 48" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
| 60" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
Heavy Duty Fast-Action Bar Clamps
These clamps have twice the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
Opening | |||||||
|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Swivel Range of Motion | Each | |
| 12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 0000000 |
| 12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
| 18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
| 18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
| 36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
| 36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
Extra Heavy Duty Fast-Action Bar Clamps
For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
Vibration-Resistant Fast-Action Bar Clamps
Pull the handle to lock the jaw in place and prevent loosening caused by vibration. The clamping arm slides freely along the bar for quick, one-handed positioning. These clamps are also known as F- or L-clamps.
Plastic Plier Clamps
Use these tools for light duty clamping. Squeeze the handles to close; release to open. Press the lever to unclamp.
Extended-Reach Plastic Plier Clamps
The long, pivoting jaws let you clamp farther into your workpiece and in tight spots. Use these tools for light duty clamping. Squeeze the handles to close; press the lever to release.
Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity | Overall Lg. | Lock Release | Body Material | Each | |
Pivoting | ||||||||
| 4" | 0" | 3 15/16" | 85 lbs. | 9 7/16" | Lever | Plastic | 000000 | 000000 |
Self-Adjusting Locking Plier Clamps
Squeeze the handles and the jaws will automatically adjust to fit your workpiece. Press the lever to release.
Fast-Action C-Clamps
Press the quick-release button and slide the screw into position to make adjustments in less time. Turn the screw for final tightening.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Screw Material | Each | |
Iron Body | ||||||
Sliding T-Handle | ||||||
| 6 1/4" | 0" | 3 7/8" | 1,200 | Steel | 00000000 | 000000 |
Build-Your-Own Wood T-Slot Fixture Tables
Cut T-tracks into wood to create your own router jigs, assembly tables, and other woodworking fixtures. These kits come with a router bit to cut tracks and a setup gauge to ensure the bit cuts at the correct depth. They also come with clamps that are sized to fit the tracks. Cut tracks in the pattern you need, then slide the clamps into the tracks to hold workpieces.
Kits | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Router Bit | Fixture Clamp | Bar Clamp | Replacement Fixture Clamps | Replacement Bar Clamps | ||||||||||||||
| No. of Pieces | Includes | Shank Size | Material | Screw Lg. | Adjustment Type | Nut Material | Opening Range | Reach | Bar Material | Each | No. of Pieces | Screw Lg. | Each | Pkg. Qty. | Pkg. | |||
| 10 | 1 Dovetail Router Bit 1 Setup Gauge 6 Fixture Clamps for Dovetail Track 2 Bar Clamps for Dovetail Track | 1/2" | Carbide | 3/4", 1", 1 1/2" | Knob, Screw | Nylon Plastic | 0"-5 3/8" | 2 3/8" | Steel | 0000000 | 000000 | 8 | 3/4", 1", 1 1/2", 2" | 0000000 | 000000 | 2 | 0000000 | 000000 |
Use pistol-grip bar clamps for delicate surfaces. They have a large clamp pad that won’t damage your workpiece. Slide the handle down the bar until it’s flush with your workpiece, then squeeze to lock it in place. Release these clamps with a trigger on the handle.
Ratcheting bar clamps are easy to position—pull the ratchet handle toward the bar to tighten against your workpiece, then press a button to release. A ratchet lock keeps them from loosening from vibration. A spring on the handle presses against the bar to keep it from sliding, even if it’s hanging upside down.
Attach clamp pads to the cap of bar clamps included in your kit for a better grip on workpieces. They have V-shaped grooves that apply pressure from two sides, so they can hug round workpieces or hold flat pieces at an angle.
| Material | Pkg. Qty. | Pkg. | |
Nylon Plastic | 4 | 0000000 | 000000 |
Quick-Clamping Hollow-Body Pin Vises
Clamp and unclamp with one hand by sliding the knurled ring forward to close the collet. Wires and rods can pass through the hollow body.
Jaw | Overall | ||||||
|---|---|---|---|---|---|---|---|
| Max. Opening | Material | Texture | Dia. | Lg. | Body Material | Each | |
| 0.051" | Steel | Smooth | 5/16" | 4 1/8" | Aluminum | 0000000 | 000000 |