Choose the channel and wear strip or brush you need for your application.

Use these guides when positioning static-sensitive material such as electronic equipment.

A clamp on one end grips conveyor guides or rods.

Use the hole at the end of these rods to attach sensors and accessories without clamps.

The pivoting joint on these rods makes angle-mounting easy.

Graduated in 1/8" increments, these rods make it easy to align multiple brackets during installation.

Also known as cross blocks, connectors join rods at different angles.

Brackets are sized to mount sensors and reflectors to a conveyor frame.

Suspend trays, plates, and drip pans underneath a conveyor.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Small enough to fit in a camera zoom lens and other precision motion applications, these carriages and guide rails have a black chrome-plated finish that diffuses light to prevent reflecting light from causing equipment to malfunction.

Run many cycles in tight spaces before replacing or re-greasing carriages.

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.

Use these carriages and guide rails for light loads where precise movement is not required.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Nylon rollers provide low-friction movement for light loads and corrosive environments.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

A handle on the side of the carriage locks the carriage in place.

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.

Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails.

Slides have a row of ball bearings on each side of the rail.

Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Replace worn shafts in two-piece support-rail shaft systems, or mate with a support rail to create your own. The tapped mounting holes match those on our Support Rails.

At approximately one-third the height of standard versions, these rails provide linear shaft support in applications with low vertical clearance. They provide stability over the entire length of shaft, allow virtually unlimited travel lengths, and eliminate bending under moderate to heavy loads.

Slide the shaft in to install, then tighten to secure. For use with light to medium loads where shaft alignment is not critical, these shaft supports brace the end of a linear shaft along the ground or other flat surface.

Create a support that fits the exact dimensions of your shaft to brace it along a flat surface. Good for use with square- and hex-profile shafts, these aluminum supports also work with round shafts of any diameter up to 1". Use them for light-to-medium-load linear motion applications where shaft alignment is not critical.

These shaft supports hold linear shafts perpendicular to the mounting surface.

Combine these general purpose shafts with a linear bearing and shaft support to create a basic linear motion system.

Keep a material certificate on hand for compliance and quality assurance needs. Certificates include a traceable lot number and material test report. These hollow shafts reduce system weight and allow you to run various media such as electrical wiring, compressed air tubing, coolants, or lubricants through the center.

Mount these externally threaded shafts into tapped holes rather than using a shaft support, or attach a hex nut, shaft collar, or other threaded accessory.

Often used in wet and dirty environments, these sleeve splines and bearings create a compact linear and rotary motion system.

Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC.