Place over existing cable in areas with heavy pedestrian and equipment traffic. Snap together as many of these interlocking ramps as you need to span sidewalks, roads, and plant floors to prevent cable damage. They reduce tripping hazards. The textured surface improves traction. These ramps resist weather and abrasion.

Use these ramps in areas with light pedestrian traffic. Place them over existing cable to prevent damage and reduce tripping hazards. All have a textured surface to improve traction. They’re also weather and abrasion resistant. Snap together as many of these interlocking ramps with the same channel height as you need to span sidewalks and plant floors.

Permanently attach these levelers to a dock to bridge the gap between the edge of the dock and a truck. Use them when loading and unloading with forklifts, pallet trucks, and hand trucks. Each leveler has a deck plate, a hinged lip plate, and two bumpers that are attached to bumper blocks. Dual extension springs act as a counterbalance to aid the leveler as it mechanically lifts the lip plate onto the truck bed; the springs return the lip plate to its original position when the truck pulls away. The plates have a diamond surface texture for positive traction.

To install, weld levelers to a dock face with a minimum 8" wide steel channel embedded into concrete at the dock edge. If the dock edge does not have an 8" wide steel channel, use the optional installation kit (sold separately) for bolt-on mounting.

Note: To determine load, take the gross weight of equipment, add typical load weight, and then multiply by two.