These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Identify equipment controls and components at a glance by their color. Also known as clamping handles, use these handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Use these handles for applications involving frequent positioning, tightening, and holding adjustments near food processing lines without the risk of contaminating the food. These handles are also known as clamping handles.

Made of stainless steel with a nitrile mounting seal, these handles are suitable for food-processing applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

With a minimum surface resistance of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

The handle is covered in rubber for a comfortable grip.

The shaft on these wrenches extends and locks.

When the ratchet head becomes worn or damaged, change it out for a new one.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

No need to pull the socket off the tool—push a button to release.

Turn sockets in the most confined spaces.

Pivot the head for access to fasteners in tight spots.

Position the head anywhere along the handle.

The ratcheting mechanism turns sockets quickly.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Measure with an accuracy of ±2%.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

Use these tools for general shop applications.

Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool.

The offset head gives you additional clearance to turn hard-to-reach fasteners.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

The heads are offset to provide clearance for reaching over obstructions.

A lever reverses the ratchet direction.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

Pivot the box end for access to fasteners in tight spots.

Suitable for occasional maintenance work, these sets are imported.

A lever reverses the ratchet direction.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Suitable for occasional maintenance work, these sets are imported.

Turn fasteners with the firm grip of a wrench and the adjustability of pliers.

Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench.

To save time and effort, these scrapers have a ratcheting mechanism to smooth the edges of tubes and holes without removing and repositioning the scraper. Replace the blade when it’s dull, or change it with a different blade style.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

Position the ratchet buckle anywhere along the webbing to access the buckle more easily.

The ratchet applies the correct pressure to ensure a complete crimp every time.

Dies snap in and out of this tool, so you can quickly change from crimping one electrical connector type to another.

The ratchet applies the correct pressure to ensure a complete crimp every time on pin-and-sleeve contacts.

Because you insert the wire ferrule from the front, this tool is useful in tight spaces.

The ratchet applies the correct pressure to ensure a complete crimp every time.