Ratchet Jacks
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
Capacity | Toe | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
| 2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Two-Height Ratchet Jacks
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point. The saddle is curved to cradle curved loads. Jacks have a ratcheting action that raises or lowers the load one notch at a time. A removable handle can be used at two different positions to get the best angle for lifting.
Aluminum jacks are lighter than iron for easier portability.
Warning: Never use to support people or loads over people.
Capacity | Toe | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Movement | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Handle Material | Each | |
Iron | |||||||||||||||
| 5 | 10,000 | 7" | 1 3/4"-8 3/4" | 2 1/2" | 1 1/8" | 14"-21" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 000000000 |
| 5 | 10,000 | 10" | 1 3/4"-11 3/4" | 2 1/2" | 1 1/8" | 17"-27" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 5 | 10,000 | 13" | 1 3/4"-14 3/4" | 2 1/2" | 1 1/8" | 20"-33" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 10 | 20,000 | 9 1/2" | 1 5/8"-11 1/8" | 2 3/8" | 1 1/8" | 17 1/4"-26 3/4" | Rigid | 2 5/8" | 2 7/8" | 8 3/4" | 6" | 60" | Steel | 0000000 | 00000000 |
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
| 15 | 30,000 | 12 3/4" | 2 1/4"-15" | 2 5/8" | 2 1/4" | 23 1/4"-36" | Rigid | 2 7/8" | 3 1/2" | 10 1/4" | 8" | 70" | Steel | 0000000 | 00000000 |
| 15 | 30,000 | 18" | 2 1/4"-20 1/4" | 2 5/8" | 2 1/4" | 28"-46" | Rigid | 2 7/8" | 3 1/2" | 11" | 8" | 70" | Steel | 0000000 | 00000000 |
Aluminum  | |||||||||||||||
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
Bench-Top Hand-Crank Stationary Lift Tables
Position small, heavy objects at a comfortable working height on your workbench. Use these tables to inspect motors, position dies, or assemble small parts. A lead screw raises or lowers the platform, so you can set these tables at your exact desired height. Unlike hydraulic lift tables that can drift or sag over time, these maintain a fixed position for as long as you need. Because these tables operate without hydraulic fluid, they’re ideal for environments where cleanliness is critical.
To adjust the height, use the included ratchet wrench to turn the lead screw.
Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Lg. | Wd. | Elevation per Stroke | Material | Color | Includes | Each | |
| 660 | 20" | 20" | 6 1/2"-14" | 20" | 20" | 1/4" | Powder-Coated Steel | Orange | Ratchet Wrench | 00000000 | 0000000 |
High-Tension Ratchet Load Binders
The reversible ratcheting handle on these load binders lets you incrementally tighten or release loads without kickback. They are also known as ratchet jacks.
Binders with clevis end fittings pull together walls, structural members, steel plates, and more. Binders with eye fittings tighten down loads in heavy duty applications such as connecting barges and constructing bridges. Use binders with grab hook fittings to bind loads on heavy equipment in transit and during construction activities.
Warning: Never use for lifting applications.
Clevis Pin | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Straight-Link Chain Trade Size | Capacity, lbs. | Max. Lg. | Take Up Lg. | Hook Opening Wd. | Dia. | Closure Type | Jaw Wd. | Eye Dia. | Handle Lg. | Material | Specifications Met | Each | |
With Clevis End Fittings | |||||||||||||
| __ | 13,000 | 30" | 10" | __ | 7/8" | Bolt and Nut | 1 1/8" | __ | 12" | Steel | __ | 0000000 | 0000000 |
With Eye Fittings | |||||||||||||
| __ | 40,000 | 37" | 14" | __ | __ | __ | __ | 1 5/16" | 26" | Steel | __ | 0000000 | 00000000 |
With Grab Hook Fittings | |||||||||||||
| 5/16, 3/8 | 8,800 | 31" | 8" | 1/2" | __ | __ | __ | __ | 14" | Steel | D.O.T. 393.102 | 000000 | 000000 |
| 3/8, 1/2 | 9,200 | 60" | 22" | 5/8" | __ | __ | __ | __ | 14" | Steel | D.O.T. 393.102 | 000000 | 000000 |
| 3/8, 1/2 | 15,000 | 33" | 8" | 5/8" | __ | __ | __ | __ | 14" | Steel | D.O.T. 393.102 | 000000 | 000000 |
| 1/2, 5/8 | 16,000 | 34" | 8" | 11/16" | __ | __ | __ | __ | 14" | Steel | D.O.T. 393.102 | 000000 | 000000 |
Tamper-Resistant Ratchet Load Binders
Secure heavy cargo, then remove and store the handle (sold separately) to prevent unwanted adjustments. Also known as ratchet jacks, these binders have a reversible ratchet that allows you to incrementally tighten or release loads without kickback.
Warning: Never use for lifting applications.