We will reply to your message within an hour.
Convert from one square drive size to another.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Attach one of these adapters to a socket to turn it with an open-end or box wrench.
Turn sockets with a bit screwdriver.
Change a standard wrench handle into a ratcheting wrench.
Pivot the head to access fasteners from an angle.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
A magnet holds the socket, making changes quicker.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Pull the collar to quickly attach and remove sockets.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.