These sets come with a handle and multiple blades. Switch them out to suit your application.

These sets include four handles and four blades.

Also known as machinist's scrapers, these tools remove material and smooth edges on a workpiece.

Kits include a light duty grinder and a variety of tools for intermittent grinding on most metals.

Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.

Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.

These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

Keep sanding sheets of various grits on hand.

Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.

Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.

These files are for infrequent use.

Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking.

Use these extremely hard, long-lasting file sets to remove hard materials from small holes, grooves, and slots.

Thinner than standard diamond files, these are good for reaching into small slots and narrow spaces.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

Choose countersinks of different sizes from these sets. Compared to countersinks with round shanks, these 1/4" hex-shank countersinks can be gripped more tightly by compatible drills and screwdrivers for greater torque.

For better performance on hard and abrasive materials, the carbide countersinks in these sets are harder, stronger, and more wear resistant than high-speed steel countersinks.

Carbide is harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

Harder, stronger, and more wear resistant than high-speed steel, the carbide countersinks in these sets have better performance on hard and abrasive materials.

With specially designed spiral flutes that reduce chip buildup on the cutting edge, these countersinks produce a clean, smooth finish on your material.

The built-in pilot maintains alignment in the hole.

The 60° countersink angle is compatible with the profile of centers on a lathe.

With more heat and abrasion resistance than high-speed steel, cobalt steel is often used on hard-to-machine materials.

Carbide is harder, stronger, and more wear resistant than cobalt steel and high-speed steel for better performance on hard and abrasive materials.

For use with most metals in addition to plastic and wood.

These sets include brushes in the most common screw sizes.

Change brush tips to clean different tube sizes.

Keep a variety of brushes on hand to clean surfaces inside tubes, pipes, and holes where scratching is a concern.

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.