We will reply to your message within an hour.
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.
Keep doors on refrigerators and industrial enclosures closed.
An emergency release gives you a way to escape if the door closes with you or someone else inside the enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.
To prevent doors from slamming, these latches are hydraulic.
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.
In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.
Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.
Often hung in freezers, these doors can be used in food-service environments.
Sized to fit short openings, these strip doors are often used with conveyors to prevent the loss of heated or cooled air through unprotected openings.
Two-way hinges allow these doors to swing closed after being pushed open from either direction.
Gravity hinges allow these doors to swing closed after being pushed open from either direction.
Made of impact-resistant polyethylene with bumpers on both sides, these doors withstand forklift traffic as well as refrigeration and washdown environments.
Bumpers on both sides protect these doors from forklift traffic. The polyethylene plastic holds up in refrigeration and washdown environments.
These hinges have wide hinge leaves that provide a large mounting surface to keep freezer and refrigerator doors from sagging.
The hinge pin attaches to the frame leaf so you can quickly lift the door off the hinge without removing the pin.
Bearings allow these hinges to open and close doors smoothly.