How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Gas Regulators
More
Tank-Mount Pressure-Regulating Valves for Fuel Gases
- For Use With: See Table
- Temperature Range: -20° to 120° F
Attach these valves to acetylene, hydrogen, methane, propane, or propylene tanks to reduce a high inlet pressure to a lower, stable outlet pressure. They have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves come with a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank.
Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.
Single-stage valves reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank. They’re best for applications where a constant outlet pressure isn’t critical.
Two-stage valves progressively reduce pressure over two steps for more consistent outlet pressure at all times. They’re often used in applications that require a constant outlet pressure regardless of the tank level.
Valves with a brass body have a longer service life than valves with a brass and steel body.
Valves with a stainless steel diaphragm can withstand harsh environments.
Inlet | Outlet | Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CGA Number | Location | Thread Direction | Pressure Gauge Range, psi | Thread Size | Location | Thread Direction | Pressure Range, psi | Pressure Adjustment Method | Body | Seal | Diaphragm | Each | |
For Use With Acetylene | |||||||||||||
UNF Male Outlet × NGO Female Inlet | |||||||||||||
CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | Knob | Brass/Steel | PTFE | Rubber | 0000000 | 0000000 |
CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Rubber | 000000 | 000000 |
UNF Male Outlet × NGO Male Inlet | |||||||||||||
CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | Knob | Brass/Steel | PTFE | Rubber | 0000000 | 000000 |
CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Rubber | 000000 | 000000 |
CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Stainless Steel | 0000000 | 000000 |
Inlet | Outlet | Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CGA Number | Location | Thread Direction | Pressure Gauge Range, psi | Thread Size | Location | Thread Direction | Pressure Range, psi | Pressure Adjustment Method | Body | Seal | Diaphragm | Each | |
For Use With Acetylene | |||||||||||||
UNF Male Outlet × NGO Female Inlet | |||||||||||||
CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Stainless Steel | 0000000 | 0000000 |
CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass/Steel | PTFE | Rubber | 000000 | 000000 |
UNF Male Outlet × NGO Male Inlet | |||||||||||||
CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Stainless Steel | 0000000 | 000000 |
CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass/Steel | PTFE | Rubber | 0000000 | 000000 |
Pressure-Regulating Valves for Fuel Gases
- For Use With: See Table
- Temperature Range: See Table
Install these valves directly in gas distribution pipelines for acetylene, hydrogen, or propane. They automatically reduce a high inlet pressure to a lower, stable outlet pressure. Valves have two outlets to fit various pipe configurations and come with a plug to close the unused outlet. The gauge monitors outlet pressure. All valves are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate.
Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.
Inlet | Outlet | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Use With | Pipe Size | Location | Max. Pressure, psi | Pipe Size | Location | Pressure Gauge Range, psi | Temperature Range, ° F | End-to-End Lg. | Port-to-Port Lg. | Each | |
NPT Female | |||||||||||
Brass Body—Neoprene/Nylon Diaphragm and Neoprene Seal | |||||||||||
Acetylene | 1/4 | Side | 350 | 1/4 | Bottom, Side | 0 to 30 | -20° to 120° | 2.60" | 1.32" | 0000000 | 0000000 |
Nuts for High-Pressure Nipples for Compressed Gas
Slide a high-pressure hose nipple for compressed gas into one of these nuts to connect a pipe to the inlet of a pressure regulator. They are also known as CGA (Compressed Gas Association) nuts and inlet nuts.
Brass nuts have good corrosion resistance and are softer than 316 stainless steel nuts, so they're easier to thread together. Chrome-plated brass nuts have comparable corrosion and wear resistance to aluminum-plated brass nuts, and have a bright, shiny appearance.
Nuts with a plastic grip can be tightened by hand instead of with a wrench.
Nuts with left-hand threads are identified with a notch.
Note: Nuts have a CGA, BS, or DIN number that corresponds to a specific type of gas. Choose a nut with the same number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Temperature: 120° F, except DIN 477 No. 9: 250° F
- Maximum Pressure: See table
- Maximum Temperature: 120° F, except DIN 477 No. 12: 250° F
Number | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||
---|---|---|---|---|---|---|---|
CGA 500 | 0.880"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Medical Gas Mixtures | 000000000 | 000000 |
CGA 510 | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 0000 |
CGA 580 | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 0000 |
CGA 590 | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 0000 |
Brass with Plastic Grip | |||||||
CGA 510 | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
CGA 580 | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
Chrome-Plated Brass | |||||||
CGA 510 | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
CGA 580 | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
CGA 590 | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 00000 |
High-Pressure Nipples for Compressed Gas
Commonly used in high-pressure welding applications, these nipples connect your tank to the inlet of a pressure regulator. One side has a threaded pipe end and the other side has a rounded end that sits inside a threaded nut (sold separately) so you can make a threaded connection.
Brass nipples have good corrosion resistance and are softer than 316 stainless steel nipples, so they're easier to thread together. Chrome-plated brass nipples have better corrosion and wear resistance than unplated brass nipples and have a bright, shiny appearance.
Nipples that tighten by hand should be paired with a nut with a plastic grip.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Temperature: 120° F
Regulator Connection | ||||||
---|---|---|---|---|---|---|
For Number (Max. Pressure) | Pipe Size | Thread Type | Lg. | For Use With | Each | |
Brass—Tighten With Wrench | ||||||
CGA 200 (500 psi @ 72° F) | 1/8 | NPT | 1 1/4" | Acetylene | 000000000 | 00000 |
CGA 410 (500 psi @ 72° F) | 1/4 | NPT | 2 33/64" | Acetylene | 000000000 | 0000 |
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F) | 1/4 | NPT | 2 1/2" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 0000 |
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F) | 1/4 | NPT | 3" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 0000 |
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F) | 1/4 | NPT | 3 1/2" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 0000 |
CGA 520 (500 psi @ 72° F) | 1/4 | NPT | 1 3/4" | Acetylene | 000000000 | 0000 |
Brass—Tighten By Hand | ||||||
CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F) | 1/4 | NPT | 3 33/64" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 00000 |
Chrome-Plated Brass—Tighten With Wrench | ||||||
CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F) | 1/4 | NPT | 3 1/2" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 00000 |
- Maximum Pressure: See table
- Maximum Temperature: 120° F
Number | Gender | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | ||||||||
---|---|---|---|---|---|---|---|---|
CGA 200 | Female | 0.628"-20 | NGO | Right Hand | 500 psi @ 72° F | Acetylene | 000000000 | 00000 |
CGA 410 | Female | 0.855"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene | 000000000 | 0000 |
CGA 500 | Male | 0.880"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Medical Gas Mixtures | 000000000 | 00000 |
CGA 510 | Male | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 0000 |
CGA 520 | Female | 0.899"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene | 000000000 | 0000 |
CGA 580 | Male | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 0000 |
CGA 590 | Male | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 0000 |
Brass with Plastic Grip | ||||||||
CGA 510 | Male | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
CGA 580 | Male | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
Chrome-Plated Brass | ||||||||
CGA 510 | Male | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
CGA 580 | Male | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
CGA 590 | Male | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 00000 |
High-Pressure Threaded Fittings for Compressed Gas
Designed to handle high-pressure welding applications, these fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Temperature: 120° F
CGA Number | Tank Connection | Regulator Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Tank | Regulator | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||||||
200 | 510 | 0.628"-14 | NGO | Right Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 000000 |
300 | 510 | 0.830"-14 | NGO | Right Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethyl Chloride, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 0000 |
410 | 510 | 0.855"-14 | NGO | Left Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
520 | 510 | 0.899"-14 | NGO | Right Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
555 | 510 | 0.908"-14 | NGO | Left Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, LP Gas, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
- Maximum Pressure: See table
- Maximum Temperature: 120° F
CGA Number | Tank Connection | Regulator Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Tank | Regulator | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||||||
200 | 300 | 0.628"-14 | NGO | Right Hand | 0.830"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene, Ethyl Chloride | 0000000 | 000000 |
200 | 520 | 0.628"-14 | NGO | Right Hand | 0.899"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene | 0000000 | 00000 |
520 | 200 | 0.899"-14 | NGO | Right Hand | 0.628"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene | 0000000 | 00000 |
- Maximum Pressure: See table
- Maximum Temperature: 120° F
CGA Number | Tank Connection | Regulator Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Tank | Regulator | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||||||
510 | 200 | 0.880"-14 | NGO | Left Hand | 0.628"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 000000 |
510 | 300 | 0.880"-14 | NGO | Left Hand | 0.830"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethyl Chloride, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
510 | 410 | 0.880"-14 | NGO | Left Hand | 0.855"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
510 | 520 | 0.880"-14 | NGO | Left Hand | 0.899"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
Threaded Hose-to-Propane-Torch Adapters for Compressed Gas
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
These adapters allow you to connect a hose to a propane torch. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance. Fittings have left-hand threads that are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
CGA Number | Hose Connection | Torch Connection | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Hose | Torch | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
023 | 600 | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1"-20 | UN/UNF (CGA) | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
Threaded Hose Fittings for Compressed Gas
Use these fittings to connect welding hose to pressure regulators and torches. They are also known as CGA (Compressed Gas Association) fittings. Fittings are brass for good corrosion resistance.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Female Hose Connection | Female Pipe Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | Pipe Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000 | 000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Female Hose Connection | Male Hose Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||||
021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 00000 |
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 0000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Female Hose Connection | Male Pipe Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | Pipe Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Female Pipe Connection | Male Hose Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Thread Direction | CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
1/4 | NPT | Right Hand | 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Male Hose Connection | Male Pipe Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | Pipe Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 00000 |
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1/8 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 0000 |
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 0000 |
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 3/8 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 0000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | Chain Lg. | For Use With | Each | |
Brass | ||||||||
---|---|---|---|---|---|---|---|---|
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 6" | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 00000 |
Threaded Hose-to-Propane-Tank Adapters for Compressed Gas
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
These adapters have a male threaded end that connects to a propane tank and a male threaded end that connects to a hose. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance. Fittings have left-hand threads that are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
CGA Number | Hose Connection | Tank Connection | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Hose | Tank | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
023 | 510 | 9/16"-18 | UN/UNF (CGA) | Left Hand | 0.880"-14 | NGO | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
Nuts for Barbed Hose Fittings for Compressed Gas
Also known as CGA (Compressed Gas Association) nuts, these are designed for low-pressure welding applications downstream of your tank and pressure regulator. Slide a barbed hose adapter for compressed gas into a male or female nut to make a threaded connection to torches or pressure regulators.
Nuts with left-hand threads are identified with a notch.
Brass nuts have good corrosion resistance. Note: Nuts have a CGA number that corresponds to a specific type of gas. Choose a nut with the same CGA number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | |||||||
---|---|---|---|---|---|---|---|
020 | A | 3/8"-24 | UN/UNF (CGA) | Right Hand | Oxygen | 0000000 | 00000 |
021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 000 |
022 | B | 9/16"-18 | UN/UNF (CGA) | Right Hand | Oxygen | 000000 | 000 |
023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000 | 000 |
025 | C | 7/8"-14 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 0000 |
027 | D | 1 1/4"-12 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 00000 |
Barbed Hose Fittings for Compressed Gas
Commonly used in low-pressure welding applications, these fittings connect downstream of your tank and pressure regulator. Slide the barbed end into rubber hose and secure with a crimp-on hose ferrule. Fittings are brass for good corrosion resistance.
Adapters let you adapt to a threaded end so you can connect welding hose to torches or pressure regulators. They consist of a barbed shaft with a rounded end that sits inside a threaded CGA nut (sold separately) so you can make a threaded hose connection. Adapters with a spiral barbed end twist into hose for an easier installation than adapters with a standard barb.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
Adapters | Nuts with Right-Hand Threads | Nuts with Left-Hand Threads | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Hose ID | For CGA Number | Gas Fitting Size | For Use With | Each | CGA Number | Each | CGA Number | Each | |||
Brass | |||||||||||
3/16" | 020, 021 | A | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 00000 | 020 | 0000000 | 00000 | __ | 000000 | 00 |
3/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 000 | 022 | 000000 | 000 | 023 | 000000 | 00000 |
1/4" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
5/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
3/8" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
Adapters | Nuts with Right-Hand Threads | Nuts with Left-Hand Threads | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Hose ID | For CGA Number | Gas Fitting Size | For Use With | Each | CGA Number | Each | CGA Number | Each | |||
Brass | |||||||||||
3/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 00000 | 022 | 000000 | 00000 | 023 | 000000 | 00000 |
1/4" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 0000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
Hose Crimping Tool and Fitting Sets for Compressed Gas
Sets contain a crimping tool and a variety of fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.
Barbed adapters let you adapt to a threaded end so you can connect welding hose to pressure regulators or torches. They consist of a barbed shaft with a rounded end that sits inside a threaded nut so you can make a threaded hose connection.
Barbed connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. Slide the barbed end into welding hose and use a hose ferrule and the crimping tool to secure the fitting to hose.
Threaded connectors let you attach threaded welding hose to pressure regulators and torches.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
For Hose ID | No. of Pieces | Includes | Max. Pressure | For Use With | Each | |
Brass | ||||||
---|---|---|---|---|---|---|
3/16", 1/4" | 93 | Crimping Tool Eight barbed hose adapters for 3/16" hose ID (use with A-size nuts) Six barbed hose adapters for 3/16" hose ID (use with B-size nuts) Ten barbed hose adapters for 1/4" hose ID (use with B-size nuts) Two barbed hose connectors for 3/16" hose ID Four barbed hose connectors for 1/4" hose ID One A-size 3/8"-24 male right-hand threaded connector (CGA-020) One A-size 3/8"-24 male left-hand threaded connector (CGA-021) One B-size 9/16"-18 male right-hand threaded connector (CGA-022) One B-size 9/16"-18 male left-hand threaded connector (CGA-023) Four A-size 3/8"-24 right-hand threaded nuts (CGA-020) Four A-size 3/8"-24 left-hand threaded nuts (CGA-021) Eight B-size 9/16"-18 female right-hand threaded nuts (CGA-022) Eight B-size 9/16"-18 female left-hand threaded nuts (CGA-023) Twelve ferrules with 0.45" hose end ID Ten ferrules with 0.562" hose end ID Twelve ferrules with 0.593" hose end ID | 200 psi @ 72° F | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 0000000 |
5/16", 3/8" | 71 | Crimping Tool Eight barbed hose adapters for 5/16" hose ID (use with B-size nuts) Eight barbed hose adapters for 3/8" hose ID (use with B-size nuts) Two barbed hose connectors for 5/16" hose ID Two barbed hose connectors for 3/8" hose ID One B-size 9/16"-18 male right-hand threaded connector (CGA-022) One B-size 9/16"-18 male left-hand threaded connector (CGA-023) Eight B-size 9/16"-18 female right-hand threaded nuts (CGA-022) Eight B-size 9/16"-18 female left-hand threaded nuts (CGA-023) Eight ferrules with 0.625" hose end ID Eight ferrules with 0.656" hose end ID Six ferrules with 0.687" hose end ID Eight ferrules with 0.718" hose end ID | 200 psi @ 72° F | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 000000 |
Quick-Disconnect Hose Couplings for Compressed Gas
Use these couplings to quickly link and unlink welding hoses, torches, and pressure regulators. They consist of a plug and socket that are sold together as a set of two—you’ll get one right-hand connection for oxygen and one left-hand connection for fuel gas. The connections are noninterchangeable and color coded so you can’t mix lines. The male threaded ends attach to threaded welding hose, and the female threaded ends attach to a torch or pressure regulator. To connect couplings, push the plug into the socket; the sleeve on the socket has a spring-loaded lock for gas-tight connections. To disconnect, pull back on the socket sleeve and twist to release the plug. The sockets have a shut-off valve that stops the flow when the coupling is separated so gas won’t leak from the line. The sockets also have a built-in check valve to prevent gas backflow. Couplings are also known as CGA (Compressed Gas Association) couplings. They are brass for good corrosion resistance.
Couplings with left-hand threads are identified with a notch in the nut.
Note: Couplings have a CGA number that corresponds to a specific type of gas. Make sure the CGA number of the coupling matches the CGA number of your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed
Includes | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
One CGA 022 Coupling Adapter (Male Hose Plug × Female Torch Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Female Torch Socket) | B | 9/16"-18 | UN/UNF (CGA) | Right Hand (CGA 022), Left Hand (CGA 023) | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed
Includes | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
One CGA 022 Coupling Adapter (Male Hose Plug × Female Regulator Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Female Regulator Socket) | B | 9/16"-18 | UN/UNF (CGA) | Right Hand (CGA 022), Left Hand (CGA 023) | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed
Includes | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
One CGA 022 Coupling Adapter (Male Hose Plug × Male Hose Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Male Hose Socket) | B | 9/16"-18 | UN/UNF (CGA) | Right Hand (CGA 022), Left Hand (CGA 023) | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000000 |
Welding Gas Check Valves for Regulators
Stop the reverse flow of gas in your regulator. Check valves do not stop flashbacks.
Max. Pressure, psi | Male Hose Connection | Male Pipe Connection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Acetylene | Hydrogen | Propane | Thread Direction | Thread Size | Thread Type | Thread Direction | Pipe Size | Thread Type | Material | Each | |
50 | 50 | 50 | Right Hand | 9/16"-18 | UNF | Left Hand | 1/4 | NPT | Brass | 000000 | 000000 |
Welding Gas Check Valves for Torches
Stop the reverse flow of gas in your torch. Check valves do not stop flashbacks.