A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Designed for high-purity processes, this tubing is made without plasticizers like DEHP that can contaminate the fluid passing through it.

Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.

Made of a PVC and Buna-N blend, this hose is lighter in weight than standard EPDM water hose.

Made of a PVC/Buna-N blend, this hose is lighter than standard EPDM water hose.

Also known as furnace door hose, this water hose has a resin-coated fiberglass cover that withstands intermittent heat up to 1,000° F and splashes of molten metal and glass.

Wash down equipment in food-processing plants, dairies, and other facilities with hot water.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.

The steel wire reinforcement gives this hose extra strength in high-pressure conditions.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Safely suction, transfer, and dispense drinking water.

Pull water out of wells, tanks, and other drinking water sources through lines connected by cam-and-groove fittings.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.

Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.

Commonly known as radiator hose, this hose is for low-pressure coolant applications.

Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.

Yarn reinforcement gives this hose good strength under pressure.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Step on this hose and it springs back to its original shape.

Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Transport milk, syrup, meat, and other wet food and beverages through your line.

For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.

An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.

Transport wet food and drink at high pressures with a hose connected by sanitary fittings.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings.

Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. To save you time, it comes with male threaded fittings already attached.

For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. Thanks to two layers of blended rubber, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. It comes with female threaded fittings already attached, saving you time.

For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. This hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose, thanks to its two layers of blended rubber.

Made of nylon with a polyurethane cover, this hose is half the weight but 240 times better at resisting wear and tear than our standard rubber hydraulic hose. The male threaded fittings come already attached to save you time.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

With four steel wire spirals for reinforcement, this hose handles rapid changes in pressure and flow without bursting.

Internally reinforced with four steel wire spirals, this hose resists bursting from rapid changes in pressure and flow. To save you time, this hose comes with female threaded fittings already attached.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi.

Attach barbed fittings to this hose for use in low-pressure air applications.

Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.

Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.

Made of PVC, this hose stays flexible in temperatures as low as -65° F.

Hose is PVC, so it’s lighter and less cumbersome than rubber hose.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.

Avoid contamination as you supply a selective catalytic reduction (SCR) system with diesel exhaust fluid (DEF). Made of peroxide-cured EPDM with stainless steel fittings, this hose won’t leach contaminants into DEF.

Hook up this hose to a single-hose paint-spray system to transfer oil- and water-based paints.