Filter by
System of Measurement
Switching Voltage
Mounting Location
Operation Type
Wire Connection
Relay Type
Electrical Connection
Socket Connection
Certification
Switch Action
Switch Starting Position
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Hazardous Location Relays
 |  |  |
Screw Terminals | Spring-Clamp Terminals | Circular-Pin Terminals—Hermetically Sealed |
 |  | |
Quick-Disconnect Terminals—Hermetically Sealed | Sockets with Screw Terminals |
Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.
Screw Terminals—Relays with screw terminals are considered interface relays, so they’re placed between your controller and components to isolate the input and output circuits. This means they protect your component from voltage spikes while amplifying the relay’s signal and reducing interference for reliable transmission. They are often used for switching applications, such as small motors and pilot lights. The included relay socket mounts on 35 mm DIN rail (also known as DIN 3 rail).
Spring-Clamp Terminals—Relays with spring-clamp terminals are considered interface relays, so they’re placed between your controller and components to isolate the input and output circuits. This means they protect your component from voltage spikes while amplifying the relay’s signal and reducing interference for reliable transmission. They are often used for switching applications, such as small motors and pilot lights. The included relay socket mounts on 35 mm DIN rail (also known as DIN 3 rail). Relays with spring-clamp terminals connect and disconnect to wires without needing to turn screws. With no screws to shake loose with vibration, the terminals hold tight over time.
Circular-Pin Terminal and Quick-Disconnect Terminal—Relays with circular-pin terminals or quick-disconnect terminals are hermetically sealed—completely air- and watertight—to shield internal parts from gases, moisture, and other contaminants. They plug into relay sockets (sold separately) for easy installation.
Sockets with Screw Terminals—Relay sockets mount to 35 mm DIN rail (also known as DIN 3 rail) or flat surfaces.
Relays | Sockets with Screw Terminals | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage | Max. Switching Voltage | hp @ Switching Voltage | Ht. | Wd. | Dp. | Quick-Disconnect Tab Wd. | Enclosure Rating | Hazardous Location Rating | Each | Each | ||||
Screw Terminals | |||||||||||||||||
1 Circuit Controlled with 1 Off or 1 On—SPDT | |||||||||||||||||
| 5 | 12V AC, 12V DC | 15.5 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 2.9" | 0.2" | 3.5" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N311 | 000000 | ——— | 0 | ||
| 5 | 12V AC, 12V DC | 29 | 12 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 2.9" | 0.6" | 3.5" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N312 | 00000 | ——— | 0 | ||
| 5 | 24V AC, 24V DC | 13.5 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 3.5" | 0.2" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N11 | 00000 | ——— | 0 | ||
| 5 | 24V AC, 24V DC | 13.5 | 16 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N15 | 00000 | ——— | 0 | ||
| 5 | 48V AC, 48V DC | 4 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 3.5" | 0.2" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N12 | 00000 | ——— | 0 | ||
| 5 | 48V AC, 48V DC | 4 | 16 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N17 | 00000 | ——— | 0 | ||
| 5 | 120V AC, 120V DC | 3.5 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 3.5" | 0.2" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N13 | 00000 | ——— | 0 | ||
| 5 | 120V AC, 120V DC | 3.5 | 16 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N19 | 00000 | ——— | 0 | ||
| 5 | 240V AC, 240V DC | 3.5 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 3.5" | 0.2" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N14 | 00000 | ——— | 0 | ||
| 5 | 240V AC, 240V DC | 3.5 | 16 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N22 | 00000 | ——— | 0 | ||
2 Circuits Controlled with 2 Off or 2 On—DPDT | |||||||||||||||||
| 8 | 24V AC, 24V DC | 13.5 | 8 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N16 | 00000 | ——— | 0 | ||
| 8 | 48V AC, 48V DC | 4 | 8 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N18 | 00000 | ——— | 0 | ||
| 8 | 120V AC, 120V DC | 3.5 | 8 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N21 | 00000 | ——— | 0 | ||
| 8 | 240V AC, 240V DC | 3.5 | 8 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 3.5" | 0.6" | 2.9" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 4190N23 | 00000 | ——— | 0 | ||
Spring-Clamp Terminals | |||||||||||||||||
1 Circuit Controlled with 1 Off or 1 On—SPDT | |||||||||||||||||
| 5 | 12V AC, 12V DC | 15.5 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 2.9" | 0.2" | 3.7" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 8163N11 | 00000 | ——— | 0 | ||
| 5 | 12V AC, 12V DC | 29 | 12 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 2.9" | 0.6" | 3.7" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 8163N14 | 00000 | ——— | 0 | ||
| 5 | 24V AC, 24V DC | 13.5 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 2.9" | 0.2" | 3.7" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 8163N12 | 00000 | ——— | 0 | ||
| 5 | 24V AC, 24V DC | 20 | 12 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 2.9" | 0.6" | 3.7" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 8163N15 | 00000 | ——— | 0 | ||
| 5 | 120V AC, 120V DC | 3.5 | 6 amp @ 240V AC/30V DC | 400V AC/125V DC | — | 2.9" | 0.2" | 3.7" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 8163N13 | 00000 | ——— | 0 | ||
| 5 | 120V AC, 120V DC | 4 | 12 amp @ 240V AC/24V DC | 400V AC/300V DC | — | 2.9" | 0.6" | 3.7" | — | IP20 | NEC Class I Division 2 Groups A, B, C, D | 8163N16 | 00000 | ——— | 0 | ||
Circular-Pin Terminals—Hermetically Sealed | |||||||||||||||||
2 Circuits Controlled with 2 Off or 2 On—DPDT | |||||||||||||||||
| 8 | 120V AC | 10 | 12 amp @ 120V AC/24V DC | 300V AC | 1/3 hp @ 120V AC | 1.6" | 1.4" | 2.1" | — | — | NEC Class I Division 2 Groups A, B, C, D | 7125T32 | 000000 | 7125T41 | 00000 | ||
| 8 | 24V DC | 38 | 12 amp @ 120V AC/24V DC | 300V AC | 1/3 hp @ 120V AC | 1.6" | 1.4" | 2.1" | — | — | NEC Class I Division 2 Groups A, B, C, D | 7125T34 | 000000 | 7125T41 | 0000 | ||
3 Circuits Controlled with 3 Off or 3 On—3PDT | |||||||||||||||||
| 11 | 120V AC | 100 | 12 amp @ 120V AC/240V AC | 300V AC | 1/3 hp @ 120V AC | 1.6" | 1.4" | 2.1" | — | — | NEC Class I Division 2 Groups A, B, C, D | 7125T111 | 000000 | 7122K21 | 0000 | ||
Quick-Disconnect Terminals—Hermetically Sealed | |||||||||||||||||
4 Circuits Controlled with 4 Off or 4 On—4PDT | |||||||||||||||||
| 14 | 120V AC | 100 | 3 amp @ 120V AC/240V AC | 240V AC | 1/10 hp @ 120V AC | 1.2" | 0.9" | 1.3" | 0.125" | — | NEC Class I Division 2 Groups A, B, C, D | 8161N11 | 000000 | 7122K25 | 00000 | ||
