Filter by
System of Measurement
Groove Diameter
Retaining Ring Style
Magnetic Properties
Performance
RoHS
Ring OD
Specifications Met
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
Thrust Load Capacity
Minimum Hardness
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Side-Mount Retaining Ring Style
Construction
External Retaining Rings
 |
Secure components on a shaft with our go-to external retaining rings. Shaped in the most common style, these are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Open with retaining ring pliers, pass over the end of a shaft, then release them to spring into a groove.
Ring ID is measured with the ring uninstalled.
Beryllium Copper—Nonmagnetic rings that conduct electricity and have good corrosion and wear resistance. Do not use in direct contact with acetylene.
Retaining Rings | Pliers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Groove | Ring | |||||||||||||
For OD | Dia. | Wd. | ID | Thk. | Thrust Load Cap., lbf | Min. Hardness | Specs. Met. | Pkg. Qty. | Pkg. | Each | ||||
Beryllium Copper | ||||||||||||||
| 1/8" | 0.117" | 0.012" | 0.112" | 0.01" | 110 | Rockwell C36 | ASME B18.27.1 | 100 | 98410A111 | 000000 | 5449A79 | 000000 | ||
| 5/32" | 0.146" | 0.012" | 0.142" | 0.01" | 132 | Rockwell C34 | ASTM B197 | 100 | 98410A815 | 00000 | 5449A79 | 00000 | ||
| 3/16" | 0.175" | 0.018" | 0.168" | 0.015" | 240 | Rockwell C36 | ASME B18.27.1 | 100 | 98410A110 | 00000 | 5449A79 | 00000 | ||
| 7/32" | 0.205" | 0.018" | 0.196" | 0.015" | 280 | Rockwell C36 | ASME B18.27.1 | 25 | 98410A605 | 0000 | 5449A79 | 00000 | ||
| 15/64" | 0.222" | 0.018" | 0.215" | 0.015" | 310 | Rockwell C36 | ASME B18.27.1 | 25 | 98410A620 | 0000 | 5449A79 | 00000 | ||
| 1/4" | 0.23" | 0.029" | 0.225" | 0.025" | 440 | Rockwell C36 | ASME B18.27.1 | 25 | 98410A635 | 00000 | 5449A79 | 00000 | ||
| 5/16" | 0.29" | 0.029" | 0.281" | 0.025" | 560 | Rockwell C36 | ASME B18.27.1 | 10 | 98410A650 | 0000 | 5449A79 | 00000 | ||
| 3/8" | 0.352" | 0.029" | 0.338" | 0.025" | 660 | Rockwell C36 | ASME B18.27.1 | 10 | 98410A665 | 0000 | 5449A79 | 00000 | ||
| 7/16" | 0.412" | 0.029" | 0.395" | 0.025" | 770 | Rockwell C36 | ASME B18.27.1 | 10 | 98410A680 | 0000 | 5449A81 | 00000 | ||
| 1/2" | 0.468" | 0.039" | 0.461" | 0.035" | 1,250 | Rockwell C36 | ASME B18.27.1 | 10 | 98410A695 | 00000 | 5449A81 | 00000 | ||
| 5/8" | 0.588" | 0.039" | 0.579" | 0.035" | 1,560 | Rockwell C36 | ASME B18.27.1 | 5 | 98410A710 | 0000 | 5449A81 | 00000 | ||
| 3/4" | 0.704" | 0.046" | 0.693" | 0.042" | 2,810 | Rockwell C36 | ASME B18.27.1 | 5 | 98410A725 | 00000 | 5449A81 | 00000 | ||
| 7/8" | 0.821" | 0.046" | 0.81" | 0.042" | 3,270 | Rockwell C36 | ASME B18.27.1 | 1 | 98410A740 | 0000 | 5449A81 | 00000 | ||
| 1" | 0.94" | 0.046" | 0.925" | 0.042" | 3,760 | Rockwell C36 | ASME B18.27.1 | 1 | 98410A755 | 0000 | 5449A81 | 00000 | ||
| 1 1/4" | 1.176" | 0.056" | 1.156" | 0.05" | 5,590 | Rockwell C36 | ASME B18.27.1 | 1 | 98410A800 | 0000 | 5449A82 | 00000 | ||
Internal Retaining Rings
 |
Secure components inside a housing or bore with our go-to internal retaining rings. Shaped in the most common style, these are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Squeeze with retaining ring pliers and release into a groove.
Ring OD is measured with the ring uninstalled.
Beryllium Copper—Nonmagnetic rings that conduct electricity and have good corrosion and wear resistance. Do not use in direct contact with acetylene.
Retaining Rings | Pliers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Groove | Ring | |||||||||||||
For ID | Dia. | Wd. | OD | Thk. | Thrust Load Cap., lbf | Min. Hardness | Specs. Met. | Pkg. Qty. | Pkg. | Each | ||||
Beryllium Copper | ||||||||||||||
| 1/4" | 0.268" | 0.02" | 0.28" | 0.015" | 320 | Rockwell C33 | ASME B18.27.1 | 10 | 91482A110 | 00000 | ——— | 0 | ||
| 5/16" | 0.33" | 0.02" | 0.346" | 0.015" | 400 | Rockwell C33 | ASME B18.27.1 | 10 | 91482A140 | 0000 | 5449A65 | 000000 | ||
| 3/8" | 0.397" | 0.029" | 0.415" | 0.025" | 800 | Rockwell C33 | ASME B18.27.1 | 10 | 91482A170 | 0000 | 5449A65 | 00000 | ||
| 1/2" | 0.53" | 0.039" | 0.548" | 0.035" | 1,500 | Rockwell C33 | ASME B18.27.1 | 10 | 91482A200 | 00000 | 5449A65 | 00000 | ||
| 5/8" | 0.665" | 0.039" | 0.694" | 0.035" | 1,880 | Rockwell C33 | ASME B18.27.1 | 10 | 91482A230 | 00000 | 5449A91 | 00000 | ||
| 3/4" | 0.796" | 0.039" | 0.831" | 0.035" | 2,280 | Rockwell C33 | ASME B18.27.1 | 5 | 91482A260 | 00000 | 5449A91 | 00000 | ||
| 1" | 1.066" | 0.046" | 1.111" | 0.042" | 4,520 | Rockwell C33 | ASME B18.27.1 | 1 | 91482A320 | 0000 | 5449A91 | 00000 | ||
| 1 1/8" | 1.197" | 0.056" | 1.249" | 0.05" | 6,010 | Rockwell C33 | ASME B18.27.1 | 1 | 91482A350 | 0000 | 5449A92 | 00000 | ||
| 1 1/2" | 1.594" | 0.056" | 1.66" | 0.05" | 8,030 | Rockwell C33 | ASME B18.27.1 | 1 | 91482A440 | 00000 | 5449A92 | 00000 | ||
| 1 9/16" | 1.658" | 0.068" | 1.734" | 0.062" | 10,400 | Rockwell C33 | ASME B18.27.1 | 1 | 91482A470 | 00000 | 5449A92 | 00000 | ||
| 1 5/8" | 1.725" | 0.068" | 1.804" | 0.062" | 10,800 | Rockwell C33 | ASME B18.27.1 | 1 | 91482A500 | 00000 | 5449A92 | 00000 | ||
Side-Mount External Retaining Rings
 |
When you can't access the ends of a shaft, install these rings anywhere along its length. Also known as E-Style rings, these grip the shaft with three contact points and a wide shoulder. Push into the groove with a side-mount retaining ring tool.
Ring OD is measured with the ring uninstalled.
Beryllium Copper—Nonmagnetic rings that conduct electricity and have good corrosion and wear resistance. Do not use in direct contact with acetylene.
Retaining Rings | Pliers | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Groove | Ring | ||||||||||||
For OD | Dia. | Wd. | OD | Thk. | Thrust Load Cap., lbf | Min. Hardness | Pkg. Qty. | Pkg. | Each | ||||
Beryllium Copper | |||||||||||||
| 1/16" | 0.052" | 0.012" | 0.14" | 0.01" | 10 | Rockwell C36 | 25 | 92725A505 | 000000 | ——— | 0 | ||
| 3/32" | 0.074" | 0.02" | 0.187" | 0.015" | 30 | Rockwell C36 | 25 | 92725A510 | 00000 | 93821A214 | 000000 | ||
| 1/8" | 0.095" | 0.02" | 0.23" | 0.015" | 50 | Rockwell C36 | 25 | 92725A515 | 00000 | ——— | 0 | ||
| 5/32" | 0.116" | 0.029" | 0.282" | 0.025" | 130 | Rockwell C36 | 25 | 92725A520 | 00000 | 93821A216 | 00000 | ||
| 3/16" | 0.147" | 0.029" | 0.335" | 0.025" | 140 | Rockwell C36 | 25 | 92725A530 | 00000 | 93821A229 | 00000 | ||
| 7/32" | 0.188" | 0.029" | 0.437" | 0.025" | 170 | Rockwell C36 | 10 | 92725A535 | 0000 | 93821A217 | 00000 | ||
| 1/4" | 0.21" | 0.029" | 0.527" | 0.025" | 190 | Rockwell C36 | 10 | 92725A540 | 0000 | 93821A238 | 00000 | ||
| 5/16" | 0.25" | 0.029" | 0.5" | 0.025" | 240 | Rockwell C36 | 10 | 92725A545 | 0000 | 93821A219 | 00000 | ||
| 3/8" | 0.303" | 0.039" | 0.66" | 0.035" | 520 | Rockwell C36 | 10 | 92725A550 | 00000 | 93821A221 | 00000 | ||
| 1/2" | 0.396" | 0.046" | 0.8" | 0.042" | 840 | Rockwell C36 | 1 | 92725A560 | 0000 | 5728A2 | 00000 | ||
| 5/8" | 0.485" | 0.046" | 0.94" | 0.042" | 1,080 | Rockwell C36 | 1 | 92725A565 | 0000 | 93821A224 | 00000 | ||
Reinforced Side-Mount External Retaining Rings
 |
These rings resist vibration, shock, and speed. Standard side-mount rings make their lowest points of contact at the shaft's centerline, while these rings establish contact below it. That difference results in 40% greater RPM limits or more to keep your ring from flying off the shaft. Push into the groove with a side-mount retaining ring tool.
Ring OD is measured with the ring uninstalled.
Beryllium Copper—Nonmagnetic rings that conduct electricity and have good corrosion and wear resistance. Do not use in direct contact with acetylene.
Retaining Rings | Pliers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Groove | Ring | |||||||||||||
For OD | Dia. | Wd. | OD | Thk. | Thrust Load Cap., lbf | Min. Hardness | Specs. Met. | Pkg. Qty. | Pkg. | Each | ||||
Beryllium Copper | ||||||||||||||
| 3/16" | 0.147" | 0.029" | 0.375" | 0.025" | 130 | Rockwell C34 | ASME B18.27.2 | 10 | 99620A424 | 000000 | 5728A2 | 000000 | ||
| 7/32" | 0.188" | 0.029" | 0.446" | 0.025" | 160 | Rockwell C34 | ASME B18.27.2 | 10 | 99620A425 | 00000 | 93821A217 | 00000 | ||
| 1/4" | 0.21" | 0.029" | 0.516" | 0.025" | 190 | Rockwell C34 | ASME B18.27.2 | 10 | 99620A426 | 00000 | 93821A219 | 00000 | ||
| 3/8" | 0.303" | 0.039" | 0.66" | 0.035" | 390 | Rockwell C34 | ASME B18.27.2 | 5 | 99620A427 | 00000 | 5728A2 | 00000 | ||
