Filter by
Thread Size
For Material Thickness
For Rivet Nut Material
Length
Installed Length
For Smooth Rivet Nut Thread Size
Thread Spacing
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Twist-Resistant Rivet Nuts
 |
 |
Ideal for parts that require frequent maintenance or disassembly, these rivet nuts won't spin out when you tighten or loosen a screw. Their ribbed body digs into material to prevent twisting.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.
Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
Lightweight Aluminum—At one-third the weight of steel or brass, use these nuts in applications with strict weight limits, such as robotics and aerospace parts. They resist rust almost as well as stainless steel but aren't as strong.
18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.
Rivet Nuts | Wrench-Driven Tools | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | ||||
Zinc-Yellow-Chromate-Plated Steel | ||||||||||||||
| 10-24 | 19/64" | 0.020" to 0.130" | 0.296" | 0.475" | 0.315" | 0.415" | 0.03" | 25 | 95105A127 | 00000 | 96349A203 | 000000 | ||
| 10-24 | 19/64" | 0.130" to 0.225" | 0.296" | 0.585" | 0.315" | 0.415" | 0.03" | 25 | 95105A131 | 0000 | 96349A203 | 00000 | ||
Lightweight Aluminum | ||||||||||||||
| 10-24 | 19/64" | 0.020" to 0.130" | 0.3" | 0.475" | 0.315" | 0.415" | 0.03" | 25 | 94020A327 | 00000 | 96349A203 | 00000 | ||
| 10-24 | 19/64" | 0.130" to 0.225" | 0.3" | 0.585" | 0.315" | 0.415" | 0.03" | 25 | 94020A331 | 00000 | 96349A203 | 00000 | ||
18-8 Stainless Steel | ||||||||||||||
| 10-24 | 19/64" | 0.020" to 0.130" | 0.3" | 0.475" | 0.315" | 0.415" | 0.03" | 10 | 97467A722 | 0000 | 96349A203 | 00000 | ||
| 10-24 | 19/64" | 0.130" to 0.225" | 0.3" | 0.585" | 0.315" | 0.415" | 0.03" | 10 | 97467A114 | 0000 | 96349A203 | 00000 | ||
Hand-Driven Rivet Nut Tools for Low-Profile Nuts
 |
Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.
For Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Overall Lg. | Each | |||
|---|---|---|---|---|---|---|---|
| 4-40 6-32 8-32 10-24 10-32 12-24 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M3 × 0. 5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Sleeve | 18-8 Stainless Steel Aluminum Steel | 5 7/8" | 98590A100 | 000000 | ||
Lever-Style Rivet Nut Tools
 |  |  |
Standard Handle, Knob Removal | Long Reach Handle, Knob Removal | Long Reach Handle, Plunger Removal |
Use two hands to maximize leverage when installing rivet nuts. These tools require a mandrel and nosepiece. To use, thread the nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.
High Leverage—High-leverage tools are about 50% longer than standard tools, giving you extra power for installing rivet nuts. They’re also compatible with rivet studs. Adjust the stroke length to match the size of your rivet nut and workpiece. Unlike tools with a fixed stroke length, you don’t need to manually control the amount of force. You can squeeze the handles all the way shut to install the rivet nut without damaging the rivet or deforming your material. These tools include a mandrel and nosepiece for 1/4"-20 rivet nuts.
Knob Removal—Tools with knob removal have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.
Plunger Removal—Tools with plunger removal have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.
Removal Operation Type | For Rivet Nut Body Shape | For Rivet Nut Material | For Smooth Rivet Nut Thread Size | For Ribbed Rivet Nut Thread Size | For Rivet Stud Thread Size | Stroke Adjustability | Overall Lg. | Wt., lb. | Includes | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Standard Handle | |||||||||||||
| Knob | Smooth Ribbed | Steel | 10-24 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm | 10-24 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm | — | Fixed | 13" | 2 | 60 steel ribbed rivet nuts (10 each of 10-24, 1/4"-20, 5/16"-18, M5 × 0.8 mm, M6 × 1.00 mm, and M8 × 1.25 mm thread sizes) Six mandrel and nosepiece sets (For 10-24, 1/4"-20, 5/16"-18, M5 × 0.8 mm, M6 × 1.00 mm, and M8 × 1.25 mm thread sizes) | 95603A113 | 000000 | ||
High-Leverage Long Reach Handle | |||||||||||||
| Knob | Smooth Ribbed Stud | Aluminum Steel | 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 1/2"-13 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm | Adjustable | 20 1/2" | 4 | 1/4"-20 Mandrel and nosepiece | 95603A770 | 000000 | ||
| Plunger | Smooth Ribbed Stud | Aluminum Steel | 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm | Adjustable | 21" | 4.5 | 1/4"-20 Mandrel and nosepiece | 95603A780 | 000000 | ||
For Thread Size | Each | |||
|---|---|---|---|---|
For Rivet Studs—Nosepiece | ||||
 | ||||
| 10-24 | 95603A105 | 00000 | ||
| 10-32 | 95603A106 | 0000 | ||
| 1/4"-20 | 95603A107 | 0000 | ||
| 5/16"-18 | 95603A108 | 00000 | ||
| M5 × 0.8 mm | 95603A109 | 0000 | ||
| M6 × 1 mm | 95603A111 | 0000 | ||
| M8 × 1.25 mm | 95603A112 | 0000 | ||
For Rivet Nuts—Mandrel and Nosepiece | ||||
 | ||||
| 8-32 | 95603A100 | 00000 | ||
| 10-24 | 95603A880 | 00000 | ||
| 10-32 | 95603A890 | 00000 | ||
| 1/4"-20 | 95603A900 | 00000 | ||
| 1/4"-28 | 95603A102 | 00000 | ||
| 5/16"-18 | 95603A910 | 00000 | ||
| 3/8"-16 | 95603A920 | 00000 | ||
| 1/2"-13 | 95603A101 | 00000 | ||
| M5 × 0.8 mm | 95603A930 | 00000 | ||
| M6 × 1 mm | 95603A940 | 00000 | ||
| M8 × 1.25 mm | 95603A950 | 00000 | ||
| M10 × 1.5 mm | 95603A960 | 00000 | ||
Wrench-Driven Rivet Nut Tools
 |
For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Shape | For Rivet Nut Material | Each | |||
|---|---|---|---|---|---|---|---|---|
| 10-24 10-32 | 7/8" | 11/16" | Smooth Ribbed Hex Bulb Sleeve | 18-8 Stainless Steel Aluminum Steel Titanium | 96349A203 | 000000 | ||
Rivet Nut Assortments with Installation Tools
 |
Keep various rivet nuts and their installation tools on hand for everyday repairs.
To install, first thread the rivet nut onto the mandrel. Then, insert the nut into a drilled hole and squeeze the handles to secure the nut.
Lightweight Aluminum—At one-third the weight of steel or brass, use these nuts in applications with strict weight limits, such as robotics and aerospace parts. They resist rust almost as well as stainless steel but aren't as strong.
No. of Pieces | Rivet Nuts Included | For Material Thk. | Includes | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Steel, Lightweight Aluminum | ||||||||
| 112 | Aluminum 1/4"-20 (20 Pieces) Aluminum 6-32 (25 Pieces) Steel 1/4"-20 (8 Pieces) Steel 8-32 (25 Pieces) Steel 10-24 (25 Pieces) | 0.01" to 0.165" | Four Mandrels Four Nosepieces Plier-Style Installation Tool | Plastic Case | 95585A300 | 0000000 | ||
Twist-Resistant Rivet Nut Assortments with Installation Tools
 |
Keep different sizes of twist-resistant rivet nuts and their installation tools on hand for quick repairs. The ribbed body digs into material so nuts won't spin out when tightening or loosening screws.
To install, first thread the rivet nut onto the mandrel. Then, insert the nut into a drilled hole and squeeze the handles to secure the nut.
Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
No. of Pieces | Rivet Nuts Included | For Material Thk. | Includes | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Zinc-Yellow-Chromate-Plated Steel | ||||||||
| 58 | 1/4"-20 (14 Pieces) 8-32 (12 Pieces) 10-24 (12 Pieces) 10-32 (12 Pieces) | 0.02" to 0.26" | Four Mandrels Plier-Style Installation Tool Three Nosepieces | Plastic Case | 95105A400 | 0000000 | ||
Thick-Wall Highly Twist-Resistant Rivet Nuts
 |  |
Our most twist-resistant rivet nuts that are also strong enough for structural frames in heavy machinery, such as forklifts. They have hex-shaped bodies with flat sides to keep them locked firmly in place as you tighten or loosen screws. The thick walls distribute heavy loads better than standard walls.
Install these nuts in a hex-shaped punched hole with a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.
Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
Rivet Nuts | Wrench-Driven Tools | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||
Thread Size | Wd. Across Flats | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | ||||
Zinc-Plated Steel | ||||||||||||||
| 10-24 | 7/32" | 0.010" to 0.085" | 0.223" | 0.301" | 0.200" | 0.344" | 0.043" | 25 | 90720A410 | 00000 | 96349A203 | 000000 | ||
| 10-24 | 7/32" | 0.085" to 0.135" | 0.223" | 0.363" | 0.210" | 0.344" | 0.043" | 25 | 90720A420 | 0000 | 96349A203 | 00000 | ||
Plier-Style Rivet Nut Tools
 |  |
Style A | Style B |
Style | For Aluminum Rivet Nut Thread Size | For Steel Rivet Nut Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Overall Lg. | Wt., lb. | Includes | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 8-32 10-24 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm | 8-32 10-24 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm | Smooth Ribbed | Aluminum Steel | 7 1/2" | 1 1/2 | Five steel 1/4"-20 rivet nuts for 0.018"-0.090" thick. (3/8" dia.) Five steel 8-32 rivet nuts for 0.018"-0.090" thick. (7/32" dia.) Five steel 10-24 rivet nuts for 0.018"-0.090" thick. (9/32" dia.) Five steel M4 rivet nuts for 0.018"-0.090" thick. (7/32" dia.) Five steel M5 rivet nuts for 0.018"-0.090" thick. (9/32" dia.) Five steel M6 rivet nuts for 0.018"-0.090" thick. (3/8" dia.) Mandrels and nosepieces for 8-32, 10-24, 1/4"-20, M4 × 0.7 mm, M5 × 0.8 mm, and M6 × 1 mm sizes | 95585A101 | 000000 | ||
| B | 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm | 6-32 8-32 10-24 10-32 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm | Smooth Ribbed | Aluminum Steel | 9 1/2" | 1 | Mandrels and nosepieces for 8-32, 10-24, and 10-32 sizes | 95585A600 | 00000 | ||
 |
Mandrel |
 |
Mandrel and Nosepiece |
For Thread Size | Includes | Each | ||
|---|---|---|---|---|
| 6-32 | Mandrel, Nosepiece | 95585A610 | 000000 | |
| 8-32 | Mandrel, Nosepiece | 95585A620 | 00000 | |
| 10-24 | Mandrel, Nosepiece | 95585A630 | 00000 | |
| 10-32 | Mandrel, Nosepiece | 95585A640 | 00000 | |
| 1/4"-20 | Mandrel, Nosepiece | 95585A650 | 00000 | |
| 5/16"-18 | Mandrel | 95585A660 | 00000 | |
| 3/8"-16 | Mandrel | 95585A670 | 00000 | |
| M4 × 0.7 mm | Mandrel, Nosepiece | 95585A680 | 00000 | |
| M5 × 0.8 mm | Mandrel, Nosepiece | 95585A690 | 00000 | |
| M6 × 1 mm | Mandrel, Nosepiece | 95585A710 | 00000 | |
| M8 × 1.25 mm | Mandrel | 95585A720 | 00000 |
Rivet Nuts For Plastic and Composites
 |  |
Add threads to plastic and composite panels without crushing them. The bulbed body of these rivet nuts folds into a large flange that distributes force more broadly than a standard rivet nut.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.
Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
Rivet Nuts
 |
|
Add threads to sheet metal and other thin surfaces inaccessible from behind. When installed, the body of these nuts collapses onto the back side of material to form a flange that holds the nut in place. Less expensive than press-fit nuts, they also avoid the spatter mess of weld nuts. They're often used in control box panels and electronic housings, as well as for quick repairs to assembled parts.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.
Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
Lightweight Aluminum—At one-third the weight of steel or brass, use these nuts in applications with strict weight limits, such as robotics and aerospace parts. They resist rust almost as well as stainless steel but aren't as strong.
Rivet Nuts | Wrench-Driven Tools | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | ||||
Zinc-Plated Steel | ||||||||||||||
| 10-24 | 1/4" | 0.010" to 0.08" | 0.25" | 0.546" | 0.380" | 0.421" | 0.038" | 5 | 93483A113 | 00000 | 96349A203 | 000000 | ||
| 10-24 | 1/4" | 0.080" to 0.13" | 0.25" | 0.594" | 0.390" | 0.406" | 0.038" | 25 | 93483A114 | 0000 | 96349A203 | 00000 | ||
| 10-24 | 1/4" | 0.130" to 0.18" | 0.25" | 0.656" | 0.390" | 0.421" | 0.038" | 5 | 93483A115 | 0000 | 96349A203 | 00000 | ||
Lightweight Aluminum | ||||||||||||||
| 10-24 | 1/4" | 0.010" to 0.080" | 0.25" | 0.531" | 0.521" | 0.406" | 0.038" | 25 | 93482A643 | 0000 | 96349A203 | 00000 | ||
| 10-24 | 1/4" | 0.080" to 0.130" | 0.25" | 0.594" | 0.514" | 0.406" | 0.038" | 25 | 93482A646 | 0000 | 96349A203 | 00000 | ||
Thick-Wall Twist-Resistant Rivet Nuts For Soft Materials
 |
|
Grip soft material tightly while holding up to heavy duty use. The ribbed body and wedges dig into aluminum and composite panels so nuts won't spin out when tightening and loosening screws. The wedges won't penetrate harder metals, such as steel. These nuts also have thick walls that distribute heavy loads better than standard walls, so they're strong enough for the aluminum frames in trucks.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.
Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
Tools for Blind Rivets and Rivet Nuts
 |
Style B |
 |
Install blind rivets and rivet nuts with the same tool. These sets come with the nosepieces and mandrels needed to install the most common sizes of blind rivets and rivet nuts. Additional mandrels and nosepieces are sold separately. Choose the attachment that matches your rivet diameter or nut thread size.
To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet body to tighten it on both sides of the material, then breaks off the excess mandrel. To install a rivet nut, thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.
Style B
| |
Nose | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Lg. | Lg. | Ht. | For Rivet Nut Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Includes | Each | ||
| 1 1/8" | 1 3/4" | 20" | 6" | 6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Bulb, Hex, Ribbed, Sleeve, Smooth | Aluminum, Brass, Stainless Steel, Steel, Titanium | Five mandrel and nosepiece sets (8-32, 10-32, 1/4"-20, 5/16"-18, and 3/8"-16) Four nosepieces (1/8", 5/32", 3/16", and 1/4") | 6879A46 | 0000000 | |
Tight-Space Rivet Nuts
 |
 |
Add threads to sheet metal and panels in confined spaces with limited backside clearance. At installation, these compact nuts collapse into themselves and press slightly outward, creating snug-fitting threads half the length of a standard nut but just as strong. With a thin top flange that creates a near-flush fit, they're ideal for light duty fastening in small enclosures or housings.
Install these nuts using a hand- or power-driven rivet nut tool. In thick material, drill or punch a slightly larger hole to ensure the nut body expands uniformly.
Tin Zinc-Plated Steel—Twice as strong as aluminum rivet nuts. The plating resists rust and helps the nut collapse without friction during installation. It's also nontoxic, unlike cadmium plating.
Tin Zinc-Plated Aluminum—The plating resists rust and helps the nut collapse without friction during installation. It's also nontoxic, unlike cadmium plating.
Tin-Plated 18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals. The tin plating helps the nut collapse without friction during installation.
Rivet Nuts | Hand-Driven Tools | Mandrels | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | Each | |||||
Tin Zinc-Plated Steel | ||||||||||||||||
| 10-24 | 9/32" | 0.030" to 0.090" | 0.28" | 0.355" | 0.175" | 0.306" | 0.02" | 25 | 98560A552 | 000000 | 98590A100 | 000000 | 98590A240 | 000000 | ||
Tin Zinc-Plated Aluminum | ||||||||||||||||
| 10-24 | 9/32" | 0.030" to 0.090" | 0.28" | 0.355" | 0.145" | 0.306" | 0.015" | 10 | 98560A178 | 0000 | 98590A100 | 00000 | 98590A240 | 00000 | ||
Tin-Plated 18-8 Stainless Steel | ||||||||||||||||
| 10-24 | 9/32" | 0.030" to 0.090" | 0.28" | 0.355" | 0.175" | 0.306" | 0.015" | 1 | 98005A140 | 0000 | 98590A100 | 00000 | 98590A240 | 00000 | ||
Lever-Style Rivet Nut Tools with Visual Stroke Indicator
 |  |
Knob Removal | Plunger Removal |
Confirm rivet nuts are installed just right—the indicator on these tools ensures you’ve applied the right amount of force. Unlike fixed-stroke tools, you don’t need to manually control the amount of force you apply. Just set your stroke length based on your rivet nut size and workpiece thickness, then squeeze the handles all the way shut to install. The indicator verifies you’ve compressed the nut properly. These tools are 50% longer than standard lever-style tools, giving you extra leverage for installation.
Mandrel and nosepiece sets are required and sold separately. Thread the rivet nut onto the mandrel and insert the nut into a drilled hole, then squeeze the handles to secure the nut.
Knob Removal—Tools with knob removal install rivet-type studs and smooth and ribbed body rivet nuts. They have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.
Plunger Removal—Tools with plunger removal install smooth and ribbed body rivet nuts. They have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.
Removal Operation Type | For Rivet Nut Body Shape | For Smooth Rivet Nut Thread Size | For Ribbed Rivet Nut Thread Size | For Rivet Stud Thread Size | Stroke Adjustability | Overall Lg. | Wt., lb. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
High-Leverage | |||||||||||
| Knob | Smooth Ribbed Stud | 4-40 6-32 8-32 10-24 10-32 1/4"-20 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm | 6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 8-32 10-32 1/4"-20 5/16"-18 | Adjustable | 22" | 4.5 | 92388A120 | 0000000 | ||
| Plunger | Smooth Ribbed | 4-40 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 1/2"-13 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | — | Adjustable | 20 1/2" | 5 | 92388A125 | 000000 | ||
 |  |
For Smooth and Ribbed Rivet Nuts | For Stud Rivet Nuts |
For Rivet Nut Body Shape | Choose a Thread Size | Each | ||
|---|---|---|---|---|
| Smooth | 4-40, 6-32, 8-32, 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16, M3 × 0.5 mm, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M8 × 1.25 mm, M10 × 1.5 mm | 92388A533 | 000000 | |
| Ribbed | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, 1/2"-13, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M8 × 1.25 mm, M10 × 1.5 mm | 92388A122 | 00000 | |
| Stud | 8-32, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 | 92388A755 | 00000 |
Easy-Install Rivet Nuts
Rubber-Coated Rivet Nuts
Air-Powered Rivet Nut Tools
 |
Install any size or style of rivet nut with a single tool. When you connect these tools to your compressed air line, the hydraulic fluid inside is pressurized, which generates the force needed to collapse a rivet nut. They’re also known as hydropneumatic rivet nut tools. Rather than rotating the rivet nut, like single-size rivet nut tools, these tools pull it straight back. This means you can adjust the pulling force or stroke depth to match your application. Set the pulling force if you’re installing rivet nuts into workpieces with different thicknesses. Set the stroke depth to install rivet nuts in soft or fragile materials without cracking or warping the surface.
75 to 100 psi—1/4 NPT Air Connection
Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size (For Rivet Nut Body Type) | Dia. | Wd. | Head Lg. | Overall Ht. | Max. Stroke Lg. | Rivet Nut Tool Cycle Time, sec. | Wt., lb. | Includes | Each | |||
Adjustable Pull Force, Adjustable Stroke Depth, Rubber Bottom | ||||||||||||
3,960 lbf Pulling Force | ||||||||||||
| 4-40 to 3/8"-24, M4 × 0.7 mm to M10 × 1.5 mm (Ribbed, Sleeve, Smooth)—For Aluminum, Stainless Steel, Steel 4-40 to 5/16"-24, M4 × 0.7 mm to M8 × 1.25 mm (Hex)—For Aluminum, Stainless Steel, Steel 8-32 to 3/8"-16, M4 × 0.7 mm to M10 × 1.5 mm (Stud)—For Aluminum, Stainless Steel, Steel | 3 3/4" | 1 1/16" | 9 5/8" | 10 3/4" | 0.275" | 1.5 | 3.5 | Nosepiece assemblies for M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, and M8 × 1.25 mm sizes | 92894A700 | 000000000 | ||
7,190 lbf Pulling Force | ||||||||||||
| 8-32 to 1/2"-13, M4 × 0.7 mm to M12 × 1.75 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—Aluminum, Stainless Steel, Steel 10-24 to 5/16"-18, M5 × 0.8 mm to M8 × 1.25 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—For Titanium | 5 1/8" | 1 1/16" | 10 1/4" | 12 5/8" | 0.39" | 4 to 5 | 7 | Carrying Case, Nosepiece assembly for 1/4"-20 size | 92894A911 | 00000000 | ||
 |
Additional Nosepiece Assemblies for 3,960 lbf. Pulling Force |
For Thread Size | Each | ||
|---|---|---|---|
| 4-40 | 92894A111 | 0000000 | |
| 8-32 | 92894A550 | 000000 | |
| 10-24 | 92894A560 | 000000 | |
| 10-32 | 92894A570 | 000000 | |
| 1/4"-20 | 92894A580 | 000000 | |
| 1/4"-28 | 92894A112 | 000000 | |
| 5/16"-18 | 92894A600 | 000000 | |
| 5/16"-24 | 92894A113 | 000000 | |
| 3/8"-16 | 92894A620 | 000000 | |
| 3/8"-24 | 92894A114 | 000000 | |
| M4 × 0.7 mm | 92894A810 | 000000 | |
| M5 × 0.8 mm | 92894A820 | 000000 | |
| M6 × 1 mm | 92894A830 | 000000 | |
| M8 × 1.25 mm | 92894A840 | 000000 | |
| M10 × 1.5 mm | 92894A850 | 000000 |
|
Additional Nosepiece Assemblies for 7,190 lbf. Pulling Force |
For Thread Size | Each | ||
|---|---|---|---|
| 8-32 | 92894A917 | 000000 | |
| 10-24 | 92894A918 | 00000 | |
| 10-32 | 92894A919 | 00000 | |
| 1/4"-20 | 92894A921 | 00000 | |
| 1/4"-28 | 92894A922 | 00000 | |
| 5/16"-18 | 92894A923 | 00000 | |
| 5/16"-24 | 92894A924 | 00000 | |
| 3/8"-16 | 92894A925 | 00000 | |
| 3/8"-24 | 92894A926 | 00000 | |
| 1/2"-13 | 92894A928 | 00000 | |
| M4 × 0.7 mm | 92894A912 | 00000 | |
| M5 × 0.8 mm | 92894A913 | 00000 | |
| M6 × 1 mm | 92894A914 | 00000 | |
| M8 × 1.25 mm | 92894A915 | 00000 | |
| M10 × 1.5 mm | 92894A916 | 00000 | |
| M12 × 1.75 mm | 92894A927 | 00000 |
 |
Maintenance Kits for 3,960 lbf. Pulling Force |
Includes | Each | ||
|---|---|---|---|
| Hex Key Wrench, Pin-Removal Punch, Spanner Wrench | 92894A711 | 000000 |
Battery-Powered Rivet Nut Tools
 |  |
Additional Mandrels | |
 | |
Additional Nosepieces |
Install any size rivet nuts in tight spaces or out in the field—no air hose or cord required. They include nosepiece assemblies to install M4, M5, M6, and M8 rivet nuts (additional mandrels and nosepieces sold separately). They run on the DeWalt rechargeable battery that's already in your toolkit. As you swap between tasks, use the touchscreen to set the exact force and stroke length you need to get the job done. These tools also keep count of how many rivet nuts you install, helping you keep track of high-volume work as you go. The cushioned grip minimizes fatigue for comfortable, repeated use, and the LED light illuminates dim areas and dark surfaces.
These tools allow you to set either pulling force or stroke depth—whichever best suits your application. Set pulling force to install rivet nuts in materials of varying thickness without having to adjust the tool. Set stroke depth to prevent warping and cracking when installing rivet nuts in fragile or soft materials.
Thread your rivet nut onto the included mandrel and press the trigger to spin it on. To install it, place the nut into the material and press once again. Spin the mandrel off by pressing one more time.
For Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Pulling Force, lbf | Head Lg. | Overall Ht. | Max. Stroke Lg. | Voltage, V DC | Batteries Included | Wt., lb. | Features | Includes | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Smooth Ribbed Hex Bulb | Aluminum Stainless Steel Steel | 4,040 | 14 1/8" | 10" | 0.335" | 20 | Yes | 5 | Adjustable Pull Force, Adjustable Stroke Depth, Cushioned Grip, LED Light | Extra Battery Nosepiece assemblies for M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, and M8 sizes | 93562A110 | 000000000 | ||
Self-Aligning Twist-Resistant Rivet Nuts
 |  |
Fasten parts with off-center holes. Also known as Riv-Float nuts, these have floating threads that shift so you can insert screws at a slight angle. Their ribbed body digs into material so nuts won't spin out when tightening or loosening screws. Install them in a drilled hole with the required wrench-driven tool (sold separately).
To install, first thread the rivet nut onto the mandrel. Then grip the tool body with a wrench and twist the tightening nut with a ratchet.
Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
Flange | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | ||||||||||||
| 10-24 | 7/16" | 0.020" to 0.100" | 0.43" | 0.498" | 0.315" | 0.555" | 0.033" | 5 | 93669A120 | 00000 | ||
Twist-Resistant Rivet Nuts For Soft Materials
 |  |
Grip soft material tightly. The ribbed body and wedges dig into aluminum and composite panels so nuts won't spin out when tightening and loosening screws. However, the wedges won't penetrate harder metals like steel.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.
Lightweight Aluminum—At one-third the weight of steel or brass, use these nuts in applications with strict weight limits, such as robotics and aerospace parts. They resist rust almost as well as stainless steel but aren't as strong.
Flange | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | |||
Lightweight Aluminum | ||||||||||||
| 10-24 | 19/64" | 0.020" to 0.130" | 0.296" | 0.475" | 0.315" | 0.415" | 0.03" | 10 | 94430A330 | 00000 | ||
Sealing Easy-Install Rivet Nuts
 |
 |
Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | |||||||||||
| 10-24 | 25/64" | 0" to 0.197" | 0.413" | 0.724" | 0.55" | 0.073" | 10 | 90186A112 | 000000 | ||
Closed-End Twist-Resistant Rivet Nuts
 |  |
Shield threads from damage and debris while preventing screws from scratching nearby components. The ribbed body of these nuts digs into material so they won't spin out when you tighten or loosen screws.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.
Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
Sealing Twist-Resistant Rivet Nuts
 |
|
Seal out contaminants and resist torque. These rivet nuts have a PVC foam seal beneath the flange so liquids and gases won't leak between the nut and surrounding material. The ribbed body keeps them from spinning out, even if you frequently tighten or loosen screws.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.
Lightweight Aluminum—At one-third the weight of steel or brass, use these nuts in applications with strict weight limits, such as robotics and aerospace parts. They resist rust almost as well as stainless steel but aren't as strong.
Flange | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | |||
Lightweight Aluminum | ||||||||||||
| 10-24 | 19/64" | 0.130" to 0.225" | 0.296" | 0.585" | 0.315" | 0.415" | 0.03" | 10 | 93484A355 | 00000 | ||
Rivet Studs
 |  |
Add these studs to thin material when you only have access to one side. An alternative to weld and press-fit studs, they have a knurled body that resists loosening from vibration. Install them in a drilled hole with a lever-style rivet nut tool. Use with Grade 5 nuts.
Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
Flange | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | For Material Thk. | Drill Bit Size | Body Dia. | Dia. | Thk. | Installed Body Lg. | Thread Lg. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | ||||||||||||||
| 10-24 | 0.02" to 0.13" | 19/64" | 0.296" | 0.415" | 0.030" | 0.38" | 0.5" | Not Rated | Not Rated | 10 | 98075A127 | 000000 | ||
Light Duty Plier-Style Rivet Nut Tools
 |
For Steel Rivet Nut Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Each | |||
|---|---|---|---|---|---|---|
| 6-32 10-24 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm | Bulb | Steel | 90186A811 | 000000 | ||
Single-Size Air-Powered Rivet Nut Tools
 |  |
Pistol Grip | Angle Grip |
Use compressed air to install rivet nuts with less effort than manual tools. Tailored to specific thread sizes, these tools rotate a rivet nut with the exact force needed to collapse it onto your workpiece. They’re smaller and lighter than other powered rivet nut tools, so you can squeeze them into tighter spaces. However, they generate less force, so they’re not recommended for installing nuts into thick materials.
Angle Grip—Angle grip tools fit into tighter spaces than pistol grip tools.
Air Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Wt., lb. | Includes | Each | |||
Pistol Grip | |||||||||||||
| 10-24 | Smooth Ribbed Bulb Sleeve | Aluminum Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 94675A007 | 0000000 | ||
Angle Grip | |||||||||||||
| 10-24 | Smooth Ribbed Bulb Sleeve | Aluminum Steel | 2 5/8" | 8 7/8" | 60 to 80 | 1/4 | NPT | 2 | Mandrel, Nosepiece | 94675A612 | 000000 | ||
