Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.

Keep different sizes of twist-resistant rivet nuts and their installation tools on hand for quick repairs. The ribbed body digs into material so nuts won't spin out when tightening or loosening screws.

To install, first thread the rivet nut onto the mandrel. Then, insert the nut into a drilled hole and squeeze the handles to secure the nut.

Keep various rivet nuts and their installation tools on hand for everyday repairs.

To install, first thread the rivet nut onto the mandrel. Then, insert the nut into a drilled hole and squeeze the handles to secure the nut.

Add threads to sheet metal and other thin surfaces inaccessible from behind. When installed, the body of these nuts collapses onto the back side of material to form a flange that holds the nut in place. Less expensive than press-fit nuts, they also avoid the spatter mess of weld nuts. They're often used in control box panels and electronic housings, as well as for quick repairs to assembled parts.

Install these nuts in a drilled or punched round hole using a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.

Install rivet nuts with one hand. Thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.

Add threads to sheet metal and panels in confined spaces with limited backside clearance. At installation, these compact nuts collapse into themselves and press slightly outward, creating snug-fitting threads half the length of a standard nut but just as strong. With a thin top flange that creates a near-flush fit, they're ideal for light duty fastening in small enclosures or housings.

Install these nuts using a hand- or power-driven rivet nut tool. In thick material, drill or punch a slightly larger hole to ensure the nut body expands uniformly.

Confirm rivet nuts are installed just right—the indicator on these tools ensures you’ve applied the right amount of force. Unlike fixed-stroke tools, you don’t need to manually control the amount of force you apply. Just set your stroke length based on your rivet nut size and workpiece thickness, then squeeze the handles all the way shut to install. The indicator verifies you’ve compressed the nut properly. These tools are 50% longer than standard lever-style tools, giving you extra leverage for installation.

Mandrel and nosepiece sets are required and sold separately. Thread the rivet nut onto the mandrel and insert the nut into a drilled hole, then squeeze the handles to secure the nut.

Keep different sizes of rivet nuts on hand to add threads to material in confined spaces. At installation, the compact body of these nuts collapses into itself and presses slightly outward, creating snug-fitting threads that are half the length of a standard nut but just as strong.

To install, thread the nut onto the mandrel, place it into a hole, push down, and turn the installation tool's T-handle.

Add threads to thin panels while keeping a flush surface. The angled head on these nuts sits evenly within your panel so nothing catches or juts out. They're ideal when space is tight around fasteners in machinery and equipment, or when appearance matters.

Install these nuts in a drilled or punched countersunk round hole using a rivet nut tool. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.

Grip soft material tightly. The ribbed body and wedges dig into aluminum and composite panels so nuts won't spin out when tightening and loosening screws. However, the wedges won't penetrate harder metals like steel.

Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.

Create threads in hard-to-work areas—where you can’t reach the back of a workpiece, or material is too thin to be tapped. For a strong grip, these rivet-mount nuts have distorted threads that increase friction with bolts. Because they mount with two rivets, they won’t spin when you’re tightening screws. However, these nuts do move inside their retainers, which lets you install bolts at a slight angle; use them to align with off-center parts. All meet military guidelines for dimensions and material.

Install any size rivet nuts in tight spaces or out in the field—no air hose or cord required. They include nosepiece assemblies to install M4, M5, M6, and M8 rivet nuts (additional mandrels and nosepieces sold separately). They run on the DeWalt rechargeable battery that's already in your toolkit. As you swap between tasks, use the touchscreen to set the exact force and stroke length you need to get the job done. These tools also keep count of how many rivet nuts you install, helping you keep track of high-volume work as you go. The cushioned grip minimizes fatigue for comfortable, repeated use, and the LED light illuminates dim areas and dark surfaces.

These tools allow you to set either pulling force or stroke depth—whichever best suits your application. Set pulling force to install rivet nuts in materials of varying thickness without having to adjust the tool. Set stroke depth to prevent warping and cracking when installing rivet nuts in fragile or soft materials.

Thread your rivet nut onto the included mandrel and press the trigger to spin it on. To install it, place the nut into the material and press once again. Spin the mandrel off by pressing one more time.

Shield threads from damage and debris while preventing screws from scratching nearby components. The ribbed body of these nuts digs into material so they won't spin out when you tighten or loosen screws.

Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.

Add these studs to thin material when you only have access to one side. An alternative to weld and press-fit studs, they have a knurled body that resists loosening from vibration. Install them in a drilled hole with a lever-style rivet nut tool. Use with Grade 5 nuts.

Seal out contaminants and resist torque. These rivet nuts have a PVC foam seal beneath the flange so liquids and gases won't leak between the nut and surrounding material. The ribbed body keeps them from spinning out, even if you frequently tighten or loosen screws.

Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.