M5 Rivet Nuts | McMaster-Carr

Filter by

System of Measurement

Thread Size

Rivet Nut Body Shape

Material

For Material Thickness

For Use In

End Type

Nut Type

Body Diameter

Thread Pitch

Finish

Zinc Yellow-Chromate Plated

For Rivet Nut Material

Flange Thickness

Drill Bit Size

Installed Length

Thread Type

Flange Diameter

For Smooth Rivet Nut Thread Size

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Thread Spacing

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

For Rivet Nut Thread Size

247 Products

Twist-Resistant Rivet Nuts

Ideal for parts that require frequent maintenance or disassembly, these rivet nuts won't spin out when you tighten or loosen a screw. Their ribbed body digs into material to prevent twisting.

Install these nuts in a drilled or punched round hole using a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.

Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

Lightweight Aluminum—At one-third the weight of steel or brass, use these nuts in applications with strict weight limits, such as robotics and aerospace parts. They resist rust almost as well as stainless steel but aren't as strong.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.

Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium—Originally designed for Formula 1 race cars, these rivet nuts are 40% lighter than steel nuts yet strong enough for the highest stress applications. They resist everything from salt water to harsh acids.

	Rivet Nuts											Wrench-Driven Tools
							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.		Each
Zinc-Yellow-Chromate-Plated Steel



		M5 x 0.8 mm	7.6	0.5 to 3.3	7.5	12.1	8	10.5	0.8	25	95105A175	00000	96349A713	000000


		M5 x 0.8 mm	7.6	3.3 to 5.7	7.5	14.9	8	10.5	0.8	25	95105A179	0000	96349A713	00000


		Lightweight Aluminum



				M5 x 0.8 mm	7.6	0.5 to 3.3	7.5	12.1	8	10.5	0.8	25	94020A375	0000	96349A713	00000


				M5 x 0.8 mm	7.6	3.3 to 5.7	7.5	14.9	8	10.5	0.8	25	94020A379	00000	96349A713	00000


				18-8 Stainless Steel



						M5 x 0.8 mm	7	0.5 to 3	7	12	8	10	1	10	97467A639	00000	96349A713	00000


						M5 x 0.8 mm	7.6	3.3 to 5.7	7.5	14.9	8	10.5	0.8	5	97467A126	0000	96349A713	00000


						Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium



								M5 x 0.8 mm	7	1 to 2.5	7	12.5	7	10	1	1	90597A110	0000	96349A713	00000

Hand-Driven Rivet Nut Tools for Low-Profile Nuts

Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.

For Rivet Nut Body Shape	For Rivet Nut Material	Overall Lg.		Each



4-40 6-32 8-32 10-24 10-32 12-24 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M3 × 0. 5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	Sleeve	18-8 Stainless Steel Aluminum Steel	5 7/8"	98590A100	000000

Required Mandrels

For Thread Size		Each
4-40	98590A210	000000
6-32	98590A220	00000
8-32	98590A230	00000
10-24	98590A240	00000
10-32	98590A250	00000
12-24	98590A255	00000
1/4"-20	98590A260	00000
1/4"-28	98590A270	00000
5/16"-18	98590A280	00000
5/16"-24	98590A285	00000
3/8"-16	98590A290	00000
3/8"-24	98590A300	00000
M3 × 0.5 mm	98590A310	00000
M4 × 0.7 mm	98590A320	00000
M5 × 0.8 mm	98590A330	00000
M6 × 1 mm	98590A340	00000
M8 × 1.25 mm	98590A350	00000
M10 × 1.5 mm	98590A360	00000

Twist-Resistant Rivet Nut Assortments with Installation Tools

Keep different sizes of twist-resistant rivet nuts and their installation tools on hand for quick repairs. The ribbed body digs into material so nuts won't spin out when tightening or loosening screws.

To install, first thread the rivet nut onto the mandrel. Then, insert the nut into a drilled hole and squeeze the handles to secure the nut.

Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

	Rivet Nuts Included	For Material Thk., mm	Includes	Container Type		Each
Zinc-Yellow-Chromate-Plated Steel



	57	M4 (12 Pieces) M5 (24 Pieces) M6 (14 Pieces)	0.5 to 6.6	Plier-Style Installation Tool Three Mandrels Three Nosepieces	Plastic Case	95105A500	0000000


	206	M4 (50 Pieces) M5 (50 Pieces) M6 (50 Pieces) M8 (25 Pieces) M10 (25 Pieces)	0.5 to 4.2	Five Mandrels Five Nosepieces Plier-Style Installation Tool	Plastic Case	95105A120	000000

Thick-Wall Highly Twist-Resistant Rivet Nuts

Our most twist-resistant rivet nuts that are also strong enough for structural frames in heavy machinery, such as forklifts. They have hex-shaped bodies with flat sides to keep them locked firmly in place as you tighten or loosen screws. The thick walls distribute heavy loads better than standard walls.

Install these nuts in a hex-shaped punched hole with a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these inserts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Rivet Nuts											Wrench-Driven Tools
							Flange, mm
	Thread Size	Wd. Across Flats, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.		Each
18-8 Stainless Steel



		M5 x 0.8 mm	7	0.5 to 3	6.98	11.5	7.3	10	1	10	93533A102	000000	96349A713	000000


		Highly Corrosion-Resistant 316 Stainless Steel



				M5 x 0.8 mm	7	0.5 to 3	6.98	11.5	7.3	10	1	5	93533A107	0000	96349A713	00000

Lever-Style Rivet Nut Tools


Standard Handle, Knob Removal	Long Reach Handle, Knob Removal	Long Reach Handle, Plunger Removal

Use two hands to maximize leverage when installing rivet nuts. These tools require a mandrel and nosepiece. To use, thread the nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.

High Leverage—High-leverage tools are about 50% longer than standard tools, giving you extra power for installing rivet nuts. They’re also compatible with rivet studs. Adjust the stroke length to match the size of your rivet nut and workpiece. Unlike tools with a fixed stroke length, you don’t need to manually control the amount of force. You can squeeze the handles all the way shut to install the rivet nut without damaging the rivet or deforming your material. These tools include a mandrel and nosepiece for _1/4"-20 rivet nuts.

Knob Removal—Tools with knob removal have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.

Plunger Removal—Tools with plunger removal have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.

	For Rivet Nut Body Shape	For Rivet Nut Material	For Smooth Rivet Nut Thread Size	For Ribbed Rivet Nut Thread Size	For Rivet Stud Thread Size	Stroke Adjustability	Overall Lg.	Wt., lb.	Includes		Each
Standard Handle



	Knob	Smooth Ribbed	Steel	10-24 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm	10-24 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm	—	Fixed	13"	2	60 steel ribbed rivet nuts (10 each of 10-24, 1/4"-20, 5/16"-18, M5 × 0.8 mm, M6 × 1.00 mm, and M8 × 1.25 mm thread sizes) Six mandrel and nosepiece sets (For 10-24, 1/4"-20, 5/16"-18, M5 × 0.8 mm, M6 × 1.00 mm, and M8 × 1.25 mm thread sizes)	95603A113	000000


	High-Leverage Long Reach Handle



			Knob	Smooth Ribbed Stud	Aluminum Steel	8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 1/2"-13 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	10-24 10-32 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm	Adjustable	20 1/2"	4	1/4"-20 Mandrel and nosepiece	95603A770	000000


			Plunger	Smooth Ribbed Stud	Aluminum Steel	8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	10-24 10-32 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm	Adjustable	21"	4.5	1/4"-20 Mandrel and nosepiece	95603A780	000000

Additional Mandrel and Nosepiece Sets for Tools with Long Handle

To install rivet nuts in other sizes, you'll need to use a mandrel and nosepiece set. To install rivet studs, you’ll need a nosepiece.

		Each
For Rivet Studs—Nosepiece



	10-24	95603A105	00000


	10-32	95603A106	0000
	1/4"-20	95603A107	0000
	5/16"-18	95603A108	00000
	M5 × 0.8 mm	95603A109	0000
	M6 × 1 mm	95603A111	0000
	M8 × 1.25 mm	95603A112	0000


	For Rivet Nuts—Mandrel and Nosepiece



			8-32	95603A100	00000


			10-24	95603A880	00000
			10-32	95603A890	00000
			1/4"-20	95603A900	00000
			1/4"-28	95603A102	00000
			5/16"-18	95603A910	00000
			3/8"-16	95603A920	00000
			1/2"-13	95603A101	00000
			M5 × 0.8 mm	95603A930	00000
			M6 × 1 mm	95603A940	00000
			M8 × 1.25 mm	95603A950	00000


			M10 × 1.5 mm	95603A960	00000

Plier-Style Rivet Nut Tools


Style A	Style B

Install rivet nuts with one hand. Thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.

Style B—Style B tools include everything you need to install rivet nuts in three common sizes.

For Aluminum Rivet Nut Thread Size	For Steel Rivet Nut Thread Size	For Rivet Nut Body Shape	For Rivet Nut Material	Overall Lg.	Wt., lb.	Includes		Each



A	8-32 10-24 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm	8-32 10-24 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm	Smooth Ribbed	Aluminum Steel	7 1/2"	1 1/2	Five steel 1/4"-20 rivet nuts for 0.018"-0.090" thick. (3/8" dia.) Five steel 8-32 rivet nuts for 0.018"-0.090" thick. (7/32" dia.) Five steel 10-24 rivet nuts for 0.018"-0.090" thick. (9/32" dia.) Five steel M4 rivet nuts for 0.018"-0.090" thick. (7/32" dia.) Five steel M5 rivet nuts for 0.018"-0.090" thick. (9/32" dia.) Five steel M6 rivet nuts for 0.018"-0.090" thick. (3/8" dia.) Mandrels and nosepieces for 8-32, 10-24, 1/4"-20, M4 × 0.7 mm, M5 × 0.8 mm, and M6 × 1 mm sizes	95585A101	000000


B	6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm	6-32 8-32 10-24 10-32 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm	Smooth Ribbed	Aluminum Steel	9 1/2"	1	Mandrels and nosepieces for 8-32, 10-24, and 10-32 sizes	95585A600	00000

Additional Mandrel and Nosepiece Sets for Style B

Mandrel

Mandrel and

Nosepiece

To install other sizes, you’ll need to add a mandrel or a mandrel and nosepiece set.

For Thread Size	Includes		Each
6-32	Mandrel, Nosepiece	95585A610	000000
8-32	Mandrel, Nosepiece	95585A620	00000
10-24	Mandrel, Nosepiece	95585A630	00000
10-32	Mandrel, Nosepiece	95585A640	00000
1/4"-20	Mandrel, Nosepiece	95585A650	00000
5/16"-18	Mandrel	95585A660	00000
3/8"-16	Mandrel	95585A670	00000
M4 × 0.7 mm	Mandrel, Nosepiece	95585A680	00000
M5 × 0.8 mm	Mandrel, Nosepiece	95585A690	00000
M6 × 1 mm	Mandrel, Nosepiece	95585A710	00000
M8 × 1.25 mm	Mandrel	95585A720	00000

Rivet Nuts For Plastic and Composites

Add threads to plastic and composite panels without crushing them. The bulbed body of these rivet nuts folds into a large flange that distributes force more broadly than a standard rivet nut.

Install these nuts in a drilled or punched round hole using a rivet nut tool. Choose an air- or battery-powered tool for faster installation or to install many different nut sizes. Length is measured from under the flange.

Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

							Flange, mm
	Thread Size	Drill Bit Size	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



		M5 x 0.8 mm	R	0.5 to 4.5	8.4	21	10	13	1	10	97217A451	00000


		M5 x 0.8 mm	R	4.5 to 8.1	8.4	23.8	10	13	1	10	97217A452	0000

Thick-Wall Twist-Resistant Rivet Nuts For Soft Materials

Grip soft material tightly while holding up to heavy duty use. The ribbed body and wedges dig into aluminum and composite panels so nuts won't spin out when tightening and loosening screws. The wedges won't penetrate harder metals, such as steel. These nuts also have thick walls that distribute heavy loads better than standard walls, so they're strong enough for the aluminum frames in trucks.

Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M5 x 0.8 mm	7.6	1.5 to 3	7.5	14.5	10.5	11	0.9	25	92982A260	00000


		M5 x 0.8 mm	7.6	3 to 5.5	7.5	17	10.5	11	0.9	25	92982A270	0000

Wrench-Driven Rivet Nut Tools

Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.

For Wrench Size	For Ratchet Size	For Rivet Nut Body Shape	For Rivet Nut Material		Each



M5 × 0.8 mm	7/8"	11/16"	Smooth Ribbed Hex Bulb Sleeve	18-8 Stainless Steel Aluminum Steel Titanium	96349A713	000000

Rivet Nuts

Add threads to sheet metal and other thin surfaces inaccessible from behind. When installed, the body of these nuts collapses onto the back side of material to form a flange that holds the nut in place. Less expensive than press-fit nuts, they also avoid the spatter mess of weld nuts. They're often used in control box panels and electronic housings, as well as for quick repairs to assembled parts.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these inserts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Rivet Nuts											Wrench-Driven Tools
							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.		Each
18-8 Stainless Steel



		M5 x 0.8 mm	7	0.5 to 3	7	11.5	7.5	10	1	10	93388A130	000000	96349A713	000000


		M5 x 0.8 mm	7	3 to 5	7	15	8.8	10	1	10	93388A140	0000	96349A713	00000


		Highly Corrosion-Resistant 316 Stainless Steel



				M5 x 0.8 mm	7	0.5 to 3	7	11.5	7.5	10	1	5	93388A250	0000	96349A713	00000

Highly Twist-Resistant Closed-End Sealing Rivet Nuts

Hex

Body

Flat sides keep these hex-shaped nuts from spinning out, while a plastic seal and closed body keep out debris and shield screws. Install them in wet environments on surfaces that protect equipment, such as fuse box housings. They help maintain an enclosure’s IP68 rating for protection from water submersion and airborne dust.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.

							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		M5 x 0.8 mm	7	0.5 to 1.5	8.3	16.5	12.5	10	1.5	5	92599A110	00000


		M5 x 0.8 mm	7	2 to 3	8.3	18.5	12.5	10	1.5	5	92599A120	0000

Tight-Space Rivet Nuts

Add threads to sheet metal and panels in confined spaces with limited backside clearance. At installation, these compact nuts collapse into themselves and press slightly outward, creating snug-fitting threads half the length of a standard nut but just as strong. With a thin top flange that creates a near-flush fit, they're ideal for light duty fastening in small enclosures or housings.

Install these nuts using a hand- or power-driven rivet nut tool. In thick material, drill or punch a slightly larger hole to ensure the nut body expands uniformly.

Tin Zinc-Plated Steel—Twice as strong as aluminum rivet nuts. The plating resists rust and helps the nut collapse without friction during installation. It's also nontoxic, unlike cadmium plating.

Tin Zinc-Plated Aluminum—The plating resists rust and helps the nut collapse without friction during installation. It's also nontoxic, unlike cadmium plating.

Tin-Plated 18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals. The tin plating helps the nut collapse without friction during installation.

	Rivet Nuts											Hand-Driven Tools		Mandrels
							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk.	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.		Each		Each
Tin Zinc-Plated Steel



		M5 x 0.8 mm	7.1	0.030" to 0.090"	7.1	9	5.124	7.77	0.4	25	91230A603	000000	98590A100	000000	98590A330	000000


		Tin Zinc-Plated Aluminum



				M5 x 0.8 mm	7.1	0.030" to 0.090"	7.1	9	5.124	7.77	0.4	10	91230A331	0000	98590A100	00000	98590A330	00000


				Tin-Plated 18-8 Stainless Steel



						M5 x 0.8 mm	7.1	0.030" to 0.090"	7.1	9	5.124	7.77	0.4	1	98005A430	0000	98590A100	00000	98590A330	00000

Tools for Blind Rivets and Rivet Nuts


Style A	Style B

Image of Specification. Front orientation. Contains Border. Rivet Tools. Tools for Blind Rivets and Rivet Nuts, Style B.

Install blind rivets and rivet nuts with the same tool. These sets come with the nosepieces and mandrels needed to install the most common sizes of blind rivets and rivet nuts. Additional mandrels and nosepieces are sold separately. Choose the attachment that matches your rivet diameter or nut thread size.

To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet body to tighten it on both sides of the material, then breaks off the excess mandrel. To install a rivet nut, thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.

Style A

Nose
Dia.	Lg.	Lg.	Ht.	For Rivet Nut Thread Size	For Rivet Nut Body Shape	For Rivet Nut Material	Includes		Each
3/4"	1 1/4"	10 1/2"	3 1/4"	6-32 8-32 10-32 1/4"-20 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm	Bulb, Hex, Ribbed, Sleeve, Smooth	Aluminum, Brass, Stainless Steel, Steel, Titanium	Four mandrel and nosepiece sets (6-32, 8-32, 10-32, and 1/4"-20) Four nosepieces (3/32", 1/8", 5/32", and 3/16")	6879A31	000000

Accessories for Rivet Tools

		Each
³⁄₃₂", ⅛", ⁵⁄₃₂", ³⁄₁₆" Jaw (Two Jaw Parts)	6879A32	000000
³⁄₃₂" Nosepiece	6879A33	00000
⅛" Nosepiece	6879A34	00000
⁵⁄₃₂" Nosepiece	6879A35	00000
³⁄₁₆" Nosepiece	6879A36	00000
6-32 Mandrel and Nosepiece Set	6879A37	00000
8-32 Mandrel and Nosepiece Set	6879A38	00000
10-32 Mandrel and Nosepiece Set	6879A39	00000
¼"-20 Mandrel and Nosepiece Set	6879A41	00000
M3 × 0.6 mm Mandrel and Nosepiece Set	6879A42	00000
M4 × 0.7 mm Mandrel and Nosepiece Set	6879A43	00000
M5 × 0.8 mm Mandrel and Nosepiece Set	6879A44	00000
M6 × 1 mm Mandrel and Nosepiece Set	6879A45	00000

Style B

Nose
Dia.	Lg.	Lg.	Ht.	For Rivet Nut Thread Size	For Rivet Nut Body Shape	For Rivet Nut Material	Includes		Each
1 1/8"	1 3/4"	20"	6"	6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	Bulb, Hex, Ribbed, Sleeve, Smooth	Aluminum, Brass, Stainless Steel, Steel, Titanium	Five mandrel and nosepiece sets (8-32, 10-32, 1/4"-20, 5/16"-18, and 3/8"-16) Four nosepieces (1/8", 5/32", 3/16", and 1/4")	6879A46	0000000

Accessories for Rivet Tools

		Each
⅛", ⁵⁄₃₂", ³⁄₁₆", ¼" Jaw (Two Jaw Parts)	6879A47	000000
⅛" Nosepiece	6879A48	00000
⁵⁄₃₂" Nosepiece	6879A49	00000
³⁄₁₆" Nosepiece	6879A51	00000
¼" Nosepiece	6879A52	00000
6-32 Mandrel and Nosepiece Set	6879A53	00000
8-32 Mandrel and Nosepiece Set	6879A54	00000
10-24 Mandrel and Nosepiece Set	6879A55	00000
10-32 Mandrel and Nosepiece Set	6879A56	00000
¼"-20 Mandrel and Nosepiece Set	6879A57	00000
¼"-28 Mandrel and Nosepiece Set	6879A58	00000
⁵⁄₁₆"-18 Mandrel and Nosepiece Set	6879A62	00000
⁵⁄₁₆"-24 Mandrel and Nosepiece Set	6879A63	00000
⅜"-16 Mandrel and Nosepiece Set	6879A59	00000
⅜"-24 Mandrel and Nosepiece Set	6879A61	00000
M4 × 0.7 mm Mandrel and Nosepiece Set	6879A64	00000
M5 × 0.8 mm Mandrel and Nosepiece Set	6879A65	00000
M6 × 1 mm Mandrel and Nosepiece Set	6879A69	00000
M8 × 1.25 mm Mandrel and Nosepiece Set	6879A67	00000
M10 × 1.5 mm Mandrel and Nosepiece Set	6879A68	00000

Rubber-Coated Rivet Nuts

Shield threads from moisture, vibration, and accidental electrical contact. The neoprene rubber coating on these brass nuts seals out water in marine and other wet environments. It also insulates against moving parts, such as shaky motors, that could cause excessive noise or damage fragile panels. The nut collapses as you thread in a screw, so you don't need any special installation tools. Also known as well nuts.

						Flange, mm
	Thread Size	For Material Thk., mm	Hole Dia., mm	Body Dia., mm	Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Neoprene-Coated Brass



		M5 x 0.8 mm	0.4 to 4.9	9.6	9.58	13.2	12.7	0.9	10	93495A503	00000


		M5 x 0.8 mm	4 to 10	9.7	9.6	20.6	14	0.9	10	93495A616	0000
		M5 x 0.8 mm	7.9 to 16.3	9.53	9.53	25.4	14.27	1.3	10	93495A504	0000
		M5 x 0.8 mm	20.5 to 30	9.7	9.6	37.7	14	1.3	10	93495A617	0000

Closed-End Sealing Rivet Nuts


Smooth Body

With a plastic seal and closed body, these rivet nuts add threads to sheet metal while keeping out water and dust. Install them in wet environments on surfaces that protect equipment, such as fuse box housings. They help maintain an enclosure’s IP68 rating for protection from water submersion and airborne dust.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.

							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		M5 x 0.8 mm	7	0.5 to 1.5	8.2	16.3	12.5	10	1.7	5	92599A170	00000


		M5 x 0.8 mm	7	2 to 3	8.2	18.3	12.5	10	1.7	5	92599A180	00000

Easy-Install Rivet Nuts

Install these rivet nuts with nothing more than a screw. Their narrow legs collapse into a flange that holds the nut in place without crushing your material. Use a power-driven rivet nut tool for fast installation. Also known as jack nuts.

Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

						Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M5 x 0.8 mm	10	0 to 5	10.5	18.4	14	1.6	25	90186A105	000000


		M5 x 0.8 mm	10	5 to 10	10.5	23.2	14	1.6	25	90186A106	00000

Self-Aligning Twist-Resistant Rivet Nuts

Fasten parts with off-center holes. Also known as Riv-Float nuts, these have floating threads that shift so you can insert screws at a slight angle. Their ribbed body digs into material so nuts won't spin out when tightening or loosening screws. Install them in a drilled hole with the required wrench-driven tool (sold separately).

To install, first thread the rivet nut onto the mandrel. Then grip the tool body with a wrench and twist the tightening nut with a ratchet.

Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

	Rivet Nuts											Wrench-Driven Tools
							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.		Each
Zinc-Plated Steel



		M5 x 0.8 mm	10	0.7 to 3.8	9.9	17.5	13.3	12.7	0.8	10	93669A270	00000	96349A740	000000


		M5 x 0.8 mm	11	0.5 to 2.5	11	12.6	8	14.1	0.9	5	93669A150	0000	———	0

Twist-Resistant Rivet Nuts For Soft Materials

Grip soft material tightly. The ribbed body and wedges dig into aluminum and composite panels so nuts won't spin out when tightening and loosening screws. However, the wedges won't penetrate harder metals like steel.

Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



		M5 x 0.8 mm	7.6	0.5 to 3.3	7.5	12	8	10.5	0.7	25	94430A150	00000


		M5 x 0.8 mm	7.6	3.3 to 5.7	7.5	14.8	8	10.5	0.7	25	94430A160	0000

Lever-Style Rivet Nut Tools with Visual Stroke Indicator


Knob Removal	Plunger Removal

Confirm rivet nuts are installed just right—the indicator on these tools ensures you’ve applied the right amount of force. Unlike fixed-stroke tools, you don’t need to manually control the amount of force you apply. Just set your stroke length based on your rivet nut size and workpiece thickness, then squeeze the handles all the way shut to install. The indicator verifies you’ve compressed the nut properly. These tools are 50% longer than standard lever-style tools, giving you extra leverage for installation.

Mandrel and nosepiece sets are required and sold separately. Thread the rivet nut onto the mandrel and insert the nut into a drilled hole, then squeeze the handles to secure the nut.

Knob Removal—Tools with knob removal install rivet-type studs and smooth and ribbed body rivet nuts. They have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.

Plunger Removal—Tools with plunger removal install smooth and ribbed body rivet nuts. They have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.

	For Rivet Nut Body Shape	For Smooth Rivet Nut Thread Size	For Ribbed Rivet Nut Thread Size	For Rivet Stud Thread Size	Stroke Adjustability	Overall Lg.	Wt., lb.		Each
High-Leverage



	Knob	Smooth Ribbed Stud	4-40 6-32 8-32 10-24 10-32 1/4"-20 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm	6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	8-32 10-32 1/4"-20 5/16"-18	Adjustable	22"	4.5	92388A120	0000000


	Plunger	Smooth Ribbed	4-40 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 1/2"-13 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	—	Adjustable	20 1/2"	5	92388A125	000000

Mandrel and Nosepiece Sets


For Smooth and Ribbed Rivet Nuts	For Stud Rivet Nuts

For Rivet Nut Body Shape	Choose a Thread Size		Each
Smooth	4-40, 6-32, 8-32, 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16, M3 × 0.5 mm, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M8 × 1.25 mm, M10 × 1.5 mm	92388A533	000000
Ribbed	6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, 1/2"-13, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M8 × 1.25 mm, M10 × 1.5 mm	92388A122	00000
Stud	8-32, 10-32, 1/4"-20, 5/16"-18, 3/8"-16	92388A755	00000

Twist-Resistant Flush-Profile Rivet Nuts

Add threads that won't shift in sheet metal and thin panels while keeping a flush surface. The angled head on these nuts sits evenly with your panel so nothing catches or juts out. The ribbed body digs into material so nuts won't spin out when tightening or loosening screws. They're ideal when space is tight around fasteners or equipment needs frequent maintenance or disassembly, or when appearance matters.

Install these nuts in a drilled or punched countersunk round hole using a rivet nut tool. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.

Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Countersink Angle	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M5 x 0.8 mm	7	1.6 to 4	7	11.5	7.500	10	1.5	90°	10	90764A115	00000


		M5 x 0.8 mm	7	4 to 6	7	13.5	7.500	10	1.5	90°	10	90764A116	0000

Closed-End Twist-Resistant Rivet Nuts

Shield threads from damage and debris while preventing screws from scratching nearby components. The ribbed body of these nuts digs into material so they won't spin out when you tighten or loosen screws.

Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



		M5 x 0.8 mm	7.6	3.3 to 5.7	7.5	25.2	18.7	10.5	0.8	10	98280A115	00000

Rivet Nut Assortments with Installation Tools

Keep various rivet nuts and their installation tools on hand for everyday repairs.

To install, first thread the rivet nut onto the mandrel. Then, insert the nut into a drilled hole and squeeze the handles to secure the nut.

Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

	Rivet Nuts Included	For Material Thk., mm	Includes	Container Type		Each
Zinc-Plated Steel



	203	M4 (120 Pieces) M5 (80 Pieces)	0.25 to 5	Plier-Style Installation Tool Two Nosepieces with Mandrels	Plastic Case	92387A850	0000000


	Lightweight Aluminum



			203	M4 (120 Pieces) M5 (80 Pieces)	0.25 to 5	Plier-Style Installation Tool Two Nosepieces with Mandrels	Plastic Case	92387A810	000000

Tight-Space Rivet Nut Assortments with Installation Tools

Keep different sizes of rivet nuts on hand to add threads to material in confined spaces. At installation, the compact body of these nuts collapses into itself and presses slightly outward, creating snug-fitting threads that are half the length of a standard nut but just as strong.

To install, thread the nut onto the mandrel, place it into a hole, push down, and turn the installation tool's T-handle.

	Rivet Nuts Included	For Material Thk.	Includes	Container Type		Each
Tin Zinc-Plated Steel



	231	M3 (50 Pieces) M4 (50 Pieces) M5 (50 Pieces) M6 (50 Pieces) M8 (25 Pieces)	0.03" to 0.09"	Five Mandrels Installation Tool	Plastic Case	91230A600	0000000

Air-Powered Rivet Nut Tools

Install any size or style of rivet nut with a single tool. When you connect these tools to your compressed air line, the hydraulic fluid inside is pressurized, which generates the force needed to collapse a rivet nut. They’re also known as hydropneumatic rivet nut tools. Rather than rotating the rivet nut, like single-size rivet nut tools, these tools pull it straight back. This means you can adjust the pulling force or stroke depth to match your application. Set the pulling force if you’re installing rivet nuts into workpieces with different thicknesses. Set the stroke depth to install rivet nuts in soft or fragile materials without cracking or warping the surface.

75 to 100 psi—1/4 NPT Air Connection

7,190 lbf Pulling Force—Use tools with a 7,190 lbf. pulling force to install rivet nuts made from hard materials, such as titanium. They’re also good for large nut sizes. However, they take about three times longer to install a nut than tools with a 3,960 lbf. pulling force.

		Body
	For Thread Size (For Rivet Nut Body Type)	Dia.	Wd.	Head Lg.	Overall Ht.	Max. Stroke Lg.	Rivet Nut Tool Cycle Time, sec.	Wt., lb.	Includes		Each
Adjustable Pull Force, Adjustable Stroke Depth, Rubber Bottom







				3,960 lbf Pulling Force

				4-40 to 3/8"-24, M4 × 0.7 mm to M10 × 1.5 mm (Ribbed, Sleeve, Smooth)—For Aluminum, Stainless Steel, Steel 4-40 to 5/16"-24, M4 × 0.7 mm to M8 × 1.25 mm (Hex)—For Aluminum, Stainless Steel, Steel 8-32 to 3/8"-16, M4 × 0.7 mm to M10 × 1.5 mm (Stud)—For Aluminum, Stainless Steel, Steel	3 3/4"	1 1/16"	9 5/8"	10 3/4"	0.275"	1.5	3.5	Nosepiece assemblies for M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, and M8 × 1.25 mm sizes	92894A700	000000000




						7,190 lbf Pulling Force

						8-32 to 1/2"-13, M4 × 0.7 mm to M12 × 1.75 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—Aluminum, Stainless Steel, Steel 10-24 to 5/16"-18, M5 × 0.8 mm to M8 × 1.25 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—For Titanium	5 1/8"	1 1/16"	10 1/4"	12 5/8"	0.39"	4 to 5	7	Carrying Case, Nosepiece assembly for 1/4"-20 size	92894A911	00000000

Accessories for Rivet Nut Tools

Additional Nosepiece Assemblies for 3,960 lbf. Pulling Force

Additional

Nosepiece

Assemblies for

3,960 lbf.

Pulling Force

For Thread Size		Each
4-40	92894A111	0000000
8-32	92894A550	000000
10-24	92894A560	000000
10-32	92894A570	000000
1/4"-20	92894A580	000000
1/4"-28	92894A112	000000
5/16"-18	92894A600	000000
5/16"-24	92894A113	000000
3/8"-16	92894A620	000000
3/8"-24	92894A114	000000
M4 × 0.7 mm	92894A810	000000
M5 × 0.8 mm	92894A820	000000
M6 × 1 mm	92894A830	000000
M8 × 1.25 mm	92894A840	000000
M10 × 1.5 mm	92894A850	000000

Additional Nosepiece Assemblies for 7,190 lbf. Pulling Force

Additional

Nosepiece

Assemblies for

7,190 lbf.

Pulling Force

For Thread Size		Each
8-32	92894A917	000000
10-24	92894A918	00000
10-32	92894A919	00000
1/4"-20	92894A921	00000
1/4"-28	92894A922	00000
5/16"-18	92894A923	00000
5/16"-24	92894A924	00000
3/8"-16	92894A925	00000
3/8"-24	92894A926	00000
1/2"-13	92894A928	00000
M4 × 0.7 mm	92894A912	00000
M5 × 0.8 mm	92894A913	00000
M6 × 1 mm	92894A914	00000
M8 × 1.25 mm	92894A915	00000
M10 × 1.5 mm	92894A916	00000
M12 × 1.75 mm	92894A927	00000

Battery-Powered Rivet Nut Tools


	Additional Mandrels

Additional Nosepieces

Install any size rivet nuts in tight spaces or out in the field—no air hose or cord required. They include nosepiece assemblies to install M4, M5, M6, and M8 rivet nuts (additional mandrels and nosepieces sold separately). They run on the DeWalt rechargeable battery that's already in your toolkit. As you swap between tasks, use the touchscreen to set the exact force and stroke length you need to get the job done. These tools also keep count of how many rivet nuts you install, helping you keep track of high-volume work as you go. The cushioned grip minimizes fatigue for comfortable, repeated use, and the LED light illuminates dim areas and dark surfaces.

These tools allow you to set either pulling force or stroke depth—whichever best suits your application. Set pulling force to install rivet nuts in materials of varying thickness without having to adjust the tool. Set stroke depth to prevent warping and cracking when installing rivet nuts in fragile or soft materials.

Thread your rivet nut onto the included mandrel and press the trigger to spin it on. To install it, place the nut into the material and press once again. Spin the mandrel off by pressing one more time.

For Rivet Nut Body Shape	For Rivet Nut Material	Pulling Force, lbf	Head Lg.	Overall Ht.	Max. Stroke Lg.	Voltage, V DC	Batteries Included	Wt., lb.	Features	Includes		Each



6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm	Smooth Ribbed Hex Bulb	Aluminum Stainless Steel Steel	4,040	14 1/8"	10"	0.335"	20	Yes	5	Adjustable Pull Force, Adjustable Stroke Depth, Cushioned Grip, LED Light	Extra Battery Nosepiece assemblies for M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, and M8 sizes	93562A110	000000000

Accessories and Replacements for Rivet Nut Tools

Additional Nosepieces

For Thread Size		Each
6-32	93562A290	000000
8-32	93562A320	00000
10-24, 10-32, M5 × 0.8 mm	93562A280	00000
1/4"-20	93562A270	00000
5/16"-18, M8 × 1.25 mm	93562A310	00000
3/8"-16, M10 × 1.5 mm	93562A260	00000
M3 × 0.5 mm	93562A330	00000
M4 × 0.7 mm	93562A340	00000
M6 × 1 mm	93562A350	00000

Additional Mandrels

For Thread Size		Each
6-32	93562A170	000000
8-32	93562A180	00000
10-24	93562A120	00000
10-32	93562A130	00000
1/4"-20	93562A140	00000
5/16"-18	93562A150	00000
3/8"-16	93562A160	00000
M3 × 0.5 mm	93562A210	00000
M4 × 0.7 mm	93562A220	00000
M5 × 0.8 mm	93562A230	00000
M6 × 1 mm	93562A240	00000
M8 × 1.25 mm	93562A250	00000
M10 × 1.5 mm	93562A190	00000

Sealing Twist-Resistant Rivet Nuts

Seal out contaminants and resist torque. These rivet nuts have a PVC foam seal beneath the flange so liquids and gases won't leak between the nut and surrounding material. The ribbed body keeps them from spinning out, even if you frequently tighten or loosen screws.

							Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Installed Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Lightweight Aluminum



		M5 x 0.8 mm	7.6	0.5 to 3.3	7.5	12.1	8	10.5	0.8	10	93484A302	000000

Sealing Easy-Install Rivet Nuts

These rivet nuts install with the twist of a screw and seal out moisture. Their narrow legs collapse into a flange that holds the nut in place without crushing your material. The PVC-coated flange prevents water and other liquids from seeping through holes and corroding threads or damaging internal components. Use a power-driven rivet nut tool for fast installation. Also known as jack nuts.

Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

						Flange, mm
	Thread Size	Drill Bit Size, mm	For Material Thk., mm	Body Dia., mm	Lg., mm	Dia.	Thk.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M5 x 0.8 mm	10	0 to 5	10.5	18.4	14	1.6	10	90186A115	000000

Rivet Nuts For Sandwich Panels

Assembled

Image of Specification. Front orientation. Contains Annotated. Rivet Nuts. Rivet Nuts For Sandwich Panels.

Add reusable threads to sandwich panels in insulated walls and clean rooms. These two-piece fasteners consist of a flanged rivet nut and a threaded insert that, when paired with an adhesive, grip the top, core, and bottom of the panel. Combined with their ribbed body that digs into material to resist spin out, these nuts won't budge when turning screws.

To install, insert the rivet nut into a drilled hole and collapse it against the backside of the panel. Then, use a mixing nozzle and dispensing gun (both sold separately) to inject structural adhesive through the rivet nut onto the bottom and core of your panel. Finally, thread the insert into the rivet nut with a slotted screwdriver. The closed end of the insert keeps adhesive from leaking into the threads.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.

								Flange, mm
	For Outer Layer Thk., mm	For Hole Dp., mm	Threaded Insert Thread Size	Threaded Insert Lg., mm	Rivet Nut Thread Size	Drill Bit Size, mm	Body Dia., mm	Dia.	Thk.		Each
18-8 Stainless Steel



		0.5 to 2	9.5 to 13	M5 x 0.8 mm	10	M10 x 1.5 mm	13	13	18	1	93503A120	00000

Accessories for Rivet Nuts

Structural Adhesives

Cartridge

Container				Strength
Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear, psi	Peel, lbf/in. wd.	Mix Ratio	Consistency (Viscosity)	Elongation	Temp. Range, ° F	Color		Each
1.58	Cartridge	4	24	3,000	35	1:1	Thick Liquid	10%	-65 to 250	Light Yellow	66215A26	000000

Light Duty Plier-Style Rivet Nut Tools

Install screw-to-install rivet nuts and rivet nuts for plastic and composites. Thread the rivet nut onto the pull rod (required, sold separately), insert the nut into the hole, and squeeze the handles to secure the nut. Friction wrenches designed to hold the nut head during installation are also available and sold separately.

For Rivet Nut Body Shape	For Rivet Nut Material		Each



6-32 10-24 1/4"-20 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm	Bulb	Steel	90186A811	000000

Rivet Nut Tool Accessories and Replacement Parts

		Each
Friction Wrench	90186A411	00000
Required Pull Rod for 6-32 Thread	90186A821	00000
Required Pull Rod for 10-24 Thread	90186A822	00000
Required Pull Rod for ¼"-20 Thread	90186A823	00000
Required Pull Rod for M4 Thread	90186A138	00000
Required Pull Rod for M5 Thread	90186A101	000000
Required Pull Rod for M6 Thread	90186A102	00000

Single-Size Air-Powered Rivet Nut Tools


Pistol Grip	Angle Grip

Use compressed air to install rivet nuts with less effort than manual tools. Tailored to specific thread sizes, these tools rotate a rivet nut with the exact force needed to collapse it onto your workpiece. They’re smaller and lighter than other powered rivet nut tools, so you can squeeze them into tighter spaces. However, they generate less force, so they’re not recommended for installing nuts into thick materials.

Angle Grip—Angle grip tools fit into tighter spaces than pistol grip tools.

							Air Connection
	For Thread Size	For Rivet Nut Body Shape	For Rivet Nut Material	Head Lg.	Overall Ht.	Operating Pressure, psi	Pipe Size	Thread Type	Wt., lb.	Includes		Each
Pistol Grip



		M5 × 0.8 mm	Smooth Ribbed Bulb Sleeve	Aluminum Steel	6"	6"	70 to 80	1/4	NPT	3	Mandrel, Nosepiece	94675A044	0000000


		Angle Grip



				M5 × 0.8 mm	Smooth Ribbed Bulb Sleeve	Aluminum Steel	2 5/8"	8 7/8"	70 to 80	1/4	NPT	2	Mandrel, Nosepiece	94675A617	000000

Accessories for Rivet Nut Tools

		Each
Replacement Battery	29835A4	0000000
Replacement Charger	29835A113	000000