Filter by
System of Measurement
Rivet Type
Material
Fastener Head Type
Mandrel Material
Specifications Met
Finish
Hole Size
Relative Domed Head Size
REACH
RoHS
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Tensile Strength
About Installing Blind Rivets
More
Zinc-Plated Steel Domed Head Blind Rivets
Installed
The zinc-plated finish provides mild corrosion resistance. These rivets join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
Metric
| For Material Thick., mm | Lg., mm | For Hole Size, mm | For Drill Bit Size, mm | Head Dia., mm | Head Ht., mm | Shear Strength, lbs. | Tensile Strength, lbs.  | Specifications Met | Pkg. Qty. | Pkg. | |
3mm Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3-5 | 8 | 3.1-3.2 | 3 | 6.5 | 1 | 220 | 290 | DIN 7337, ISO 15979 | 25 | 97519A245 | 00000 |
4mm Dia. | |||||||||||
| 2.5-4.5 | 8 | 4.1-4.2 | 4 | 8 | 1.2 | 440 | 560 | DIN 7337, ISO 15979 | 25 | 97519A246 | 0000 |
| 4.5-6.5 | 10 | 4.1-4.2 | 4 | 8 | 1.2 | 440 | 560 | DIN 7337, ISO 15979 | 25 | 97519A247 | 0000 |