Filter by
Thread Size
For Rivet Nut Material
For Material Thickness
Rivet Material
Rivet Type
Nut Type
Installed Length
End Type
For Blind Rivet Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Hand-Driven Rivet Nut Tools for Low-Profile Nuts
 |
Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.
For Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Overall Lg. | Each | |||
|---|---|---|---|---|---|---|---|
| 4-40 6-32 8-32 10-24 10-32 12-24 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M3 × 0. 5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Sleeve | 18-8 Stainless Steel Aluminum Steel | 5 7/8" | 98590A100 | 000000 | ||
Tools for Blind Rivets and Rivet Nuts
 |
Style B |
 |
Install blind rivets and rivet nuts with the same tool. These sets come with the nosepieces and mandrels needed to install the most common sizes of blind rivets and rivet nuts. Additional mandrels and nosepieces are sold separately. Choose the attachment that matches your rivet diameter or nut thread size.
To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet body to tighten it on both sides of the material, then breaks off the excess mandrel. To install a rivet nut, thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.
Style B
| |
Nose | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Lg. | Lg. | Ht. | For Rivet Nut Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Includes | Each | ||
| 1 1/8" | 1 3/4" | 20" | 6" | 6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Bulb, Hex, Ribbed, Sleeve, Smooth | Aluminum, Brass, Stainless Steel, Steel, Titanium | Five mandrel and nosepiece sets (8-32, 10-32, 1/4"-20, 5/16"-18, and 3/8"-16) Four nosepieces (1/8", 5/32", 3/16", and 1/4") | 6879A46 | 0000000 | |
Twist-Resistant Rivet Nuts
 |  |
Ideal for parts that require frequent maintenance or disassembly, these rivet nuts won't spin out when you tighten or loosen a screw. Their ribbed body digs into material to prevent twisting.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.
Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.
Rivet Nuts | Wrench-Driven Tools | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | ||||
Zinc-Yellow-Chromate-Plated Steel | ||||||||||||||
| 3/8"-24 | 17/32" | 0.027" to 0.150" | 0.53" | 0.69" | 0.470" | 0.685" | 0.035" | 10 | 95105A152 | 00000 | 96349A509 | 000000 | ||
| 3/8"-24 | 17/32" | 0.150" to 0.312" | 0.53" | 0.805" | 0.425" | 0.685" | 0.035" | 10 | 95105A113 | 00000 | 96349A509 | 00000 | ||
18-8 Stainless Steel | ||||||||||||||
| 3/8"-24 | 17/32" | 0.027" to 0.150" | 0.53" | 0.69" | 0.470" | 0.685" | 0.035" | 5 | 97467A122 | 00000 | 96349A509 | 00000 | ||
| 3/8"-24 | 17/32" | 0.150" to 0.312" | 0.53" | 0.805" | 0.425" | 0.685" | 0.035" | 5 | 97467A123 | 00000 | 96349A509 | 00000 | ||
Roller Chain Breaker/Riveters
 |
In addition to breaking chain, this tool can also rivet chain to increase strength for better performance on high-speed drives. It can break ANSI numbers 50 and 60 roller chain and rivet ANSI number 50 chain. Attach the removable handle and clamp the breaker/riveter in a vise or bolt it to a workbench.
Roller Chain Breaker/Riveters | Replacement Points | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Hole | |||||||||||||
For Roller Chain Trade No. | For Roller Chain Pitch | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Thread Size | Includes | Each | Each | ||||
For Single-Strand ANSI Roller Chain | ||||||||||||||
| 50, 60 | 5/8" to 3/4" | 6" | 1 3/4" | Steel | No | 2 | 3/8"-24 | Press Plate, Removable Handle, Rivet Anvil, Steel Rivet Set | 8186K11 | 0000000 | 8186K21 | 000000 | ||
Wrench-Driven Rivet Nut Tools
 |
Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.
For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Shape | For Rivet Nut Material | Each | |||
|---|---|---|---|---|---|---|---|---|
| 3/8"-16 3/8"-24 | 7/8" | 11/16" | Smooth Ribbed Hex Bulb Sleeve | 18-8 Stainless Steel Aluminum Steel Titanium | 96349A509 | 000000 | ||
Mil. Spec. Rivet-Mount Nuts
 |  |
 |  |
Create threads in hard-to-work areas—where you can’t reach the back of a workpiece, or material is too thin to be tapped. For a strong grip, these rivet-mount nuts have distorted threads that increase friction with bolts. Because they mount with two rivets, they won’t spin when you’re tightening screws. However, these nuts do move inside their retainers, which lets you install bolts at a slight angle; use them to align with off-center parts. All meet military guidelines for dimensions and material.
Cadmium-Plated Carbon Steel—Cadmium-plated nuts resist corrosion in industrial and saltwater environments, although they will lose their corrosion resistance over 450° F. The cadmium plating also adds lubricity, making these nuts easy to install.
A286 Stainless Steel—A286 stainless steel nuts are corrosion resistant.
Lubricated—Lubricated nuts thread onto bolts smoothly.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Base | Barrel | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thk. | Dia. | Ht. | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Mil. Spec. | Certificate Type | Each | |||
Cadmium-Plated Carbon Steel—Lubricated | ||||||||||||||
| 3/8"-24 | 1 19/64" | 43/64" | 1/16" | 0.453" | 19/64" | 2 | 0.13" | 1" | MS21059L6 | Material Certificate | 90857A112 | 000000 | ||
A286 Stainless Steel—Lubricated | ||||||||||||||
| 3/8"-24 | 1 19/64" | 43/64" | 1/16" | 0.453" | 19/64" | 2 | 0.13" | 1" | MS21060L6 | Material Certificate | 90857A125 | 00000 | ||
Air-Powered Rivet Nut Tools
 |
Install any size or style of rivet nut with a single tool. When you connect these tools to your compressed air line, the hydraulic fluid inside is pressurized, which generates the force needed to collapse a rivet nut. They’re also known as hydropneumatic rivet nut tools. Rather than rotating the rivet nut, like single-size rivet nut tools, these tools pull it straight back. This means you can adjust the pulling force or stroke depth to match your application. Set the pulling force if you’re installing rivet nuts into workpieces with different thicknesses. Set the stroke depth to install rivet nuts in soft or fragile materials without cracking or warping the surface.
75 to 100 psi—1/4 NPT Air Connection
Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size (For Rivet Nut Body Type) | Dia. | Wd. | Head Lg. | Overall Ht. | Max. Stroke Lg. | Rivet Nut Tool Cycle Time, sec. | Wt., lb. | Includes | Each | |||
Adjustable Pull Force, Adjustable Stroke Depth, Rubber Bottom | ||||||||||||
3,960 lbf Pulling Force | ||||||||||||
| 4-40 to 3/8"-24, M4 × 0.7 mm to M10 × 1.5 mm (Ribbed, Sleeve, Smooth)—For Aluminum, Stainless Steel, Steel 4-40 to 5/16"-24, M4 × 0.7 mm to M8 × 1.25 mm (Hex)—For Aluminum, Stainless Steel, Steel 8-32 to 3/8"-16, M4 × 0.7 mm to M10 × 1.5 mm (Stud)—For Aluminum, Stainless Steel, Steel | 3 3/4" | 1 1/16" | 9 5/8" | 10 3/4" | 0.275" | 1.5 | 3.5 | Nosepiece assemblies for M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, and M8 × 1.25 mm sizes | 92894A700 | 000000000 | ||
7,190 lbf Pulling Force | ||||||||||||
| 8-32 to 1/2"-13, M4 × 0.7 mm to M12 × 1.75 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—Aluminum, Stainless Steel, Steel 10-24 to 5/16"-18, M5 × 0.8 mm to M8 × 1.25 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—For Titanium | 5 1/8" | 1 1/16" | 10 1/4" | 12 5/8" | 0.39" | 4 to 5 | 7 | Carrying Case, Nosepiece assembly for 1/4"-20 size | 92894A911 | 00000000 | ||
 |
Additional Nosepiece Assemblies for 3,960 lbf. Pulling Force |
For Thread Size | Each | ||
|---|---|---|---|
| 4-40 | 92894A111 | 0000000 | |
| 8-32 | 92894A550 | 000000 | |
| 10-24 | 92894A560 | 000000 | |
| 10-32 | 92894A570 | 000000 | |
| 1/4"-20 | 92894A580 | 000000 | |
| 1/4"-28 | 92894A112 | 000000 | |
| 5/16"-18 | 92894A600 | 000000 | |
| 5/16"-24 | 92894A113 | 000000 | |
| 3/8"-16 | 92894A620 | 000000 | |
| 3/8"-24 | 92894A114 | 000000 | |
| M4 × 0.7 mm | 92894A810 | 000000 | |
| M5 × 0.8 mm | 92894A820 | 000000 | |
| M6 × 1 mm | 92894A830 | 000000 | |
| M8 × 1.25 mm | 92894A840 | 000000 | |
| M10 × 1.5 mm | 92894A850 | 000000 |
|
Additional Nosepiece Assemblies for 7,190 lbf. Pulling Force |
For Thread Size | Each | ||
|---|---|---|---|
| 8-32 | 92894A917 | 000000 | |
| 10-24 | 92894A918 | 00000 | |
| 10-32 | 92894A919 | 00000 | |
| 1/4"-20 | 92894A921 | 00000 | |
| 1/4"-28 | 92894A922 | 00000 | |
| 5/16"-18 | 92894A923 | 00000 | |
| 5/16"-24 | 92894A924 | 00000 | |
| 3/8"-16 | 92894A925 | 00000 | |
| 3/8"-24 | 92894A926 | 00000 | |
| 1/2"-13 | 92894A928 | 00000 | |
| M4 × 0.7 mm | 92894A912 | 00000 | |
| M5 × 0.8 mm | 92894A913 | 00000 | |
| M6 × 1 mm | 92894A914 | 00000 | |
| M8 × 1.25 mm | 92894A915 | 00000 | |
| M10 × 1.5 mm | 92894A916 | 00000 | |
| M12 × 1.75 mm | 92894A927 | 00000 |
 |
Maintenance Kits for 3,960 lbf. Pulling Force |
Includes | Each | ||
|---|---|---|---|
| Hex Key Wrench, Pin-Removal Punch, Spanner Wrench | 92894A711 | 000000 |
Tight-Space Rivet Nuts
 |  |
Add threads to sheet metal and panels in confined spaces with limited backside clearance. At installation, these compact nuts collapse into themselves and press slightly outward, creating snug-fitting threads half the length of a standard nut but just as strong. With a thin top flange that creates a near-flush fit, they're ideal for light duty fastening in small enclosures or housings.
Install these nuts using a hand- or power-driven rivet nut tool. In thick material, drill or punch a slightly larger hole to ensure the nut body expands uniformly.
Cadmium-Plated Steel—Twice as strong as aluminum rivet nuts. The plating resists rust and helps the nut collapse without friction during installation.
Tin-Plated 18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals. The tin plating helps the nut collapse without friction during installation.
Rivet Nuts | Hand-Driven Tools | Mandrels | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | Each | |||||
Cadmium-Plated Steel | ||||||||||||||||
| 3/8"-24 | 9/16" | 0.030" to 0.090" | 0.561" | 0.73" | 0.360" | 0.588" | 0.015" | 5 | 98560A521 | 000000 | 98590A100 | 000000 | 98590A300 | 000000 | ||
Tin-Plated 18-8 Stainless Steel | ||||||||||||||||
| 3/8"-24 | 9/16" | 0.030" to 0.090" | 0.561" | 0.73" | 0.360" | 0.588" | 0.015" | 1 | 98005A190 | 00000 | 98590A100 | 00000 | 98590A300 | 00000 | ||
Single-Size Air-Powered Rivet Nut Tools
 |
Pistol Grip |
Use compressed air to install rivet nuts with less effort than manual tools. Tailored to specific thread sizes, these tools rotate a rivet nut with the exact force needed to collapse it onto your workpiece. They’re smaller and lighter than other powered rivet nut tools, so you can squeeze them into tighter spaces. However, they generate less force, so they’re not recommended for installing nuts into thick materials.
Air Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Wt., lb. | Includes | Each | |||
Pistol Grip | |||||||||||||
| 3/8"-24 | Smooth Ribbed Bulb Sleeve | Aluminum Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 94675A021 | 0000000 | ||
