Elevate robot arms with these pedestals so they can reach onto raised surfaces, such as conveyor belts or workstations. Made from steel, these pedestals are strong and built to last—they’re also machinable and weldable, so you can modify the mounting plates to suit your application. Secure them to the ground or other flat surface using the holes in the bottom plate. Additional holes are designed to level the pedestals—thread fasteners (not included) through each hole and adjust their depth to compensate for uneven floors. These pedestals are only for use at collaborative speeds. They are not designed for robots moving at high speeds.

If you do not see your robot model arm listed, you will need to confirm compatibility yourself. In addition to mounting hole pattern, you will also need to ensure that the maximum potential forces of your robot arm and application are within safe limits for the pedestal's footprint, center of gravity, and any additional anchoring systems. Taller pedestals have a higher center of gravity and thus require heavier anchoring systems to maintain stability at higher forces compared to shorter pedestals.