McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    30 Products

    Collaborative Robot Pedestals

    Image of ProductInUse. Front orientation. Contains Annotated. Robot Pedestals. Collaborative Robot Pedestals.
    Image of ProductInUse. Front orientation. Contains MultipleImages. Robot Pedestals. Collaborative Robot Pedestals.
    Lift your collaborative robot so it can reach raised surfaces. These pedestals are often used to support robots next to conveyor belts, so they can grab boxes to arrange on pallets.
    Add accessories—such as dollies and controller mounts (both sold separately)—to help you move these pedestals or attach components to them.
    Pedestals
    Image of Product. Pedestal. Front orientation. Robot Pedestals. Collaborative Robot Pedestals, Pedestals.
    Image of ProductInUse. Dolly Shown with Dolly Anchors (Sold Separately). Front orientation. Contains Inset. Robot Workstations. Collaborative Robot Pedestals.

    Pedestal

    Dolly Shown with Dolly Anchors (Sold

    Separately)

    Image of Product. Dolly Anchor. Bottom orientation. Robot Workstations. Collaborative Robot Pedestals.

    Dolly Anchor

    Made of steel, these pedestals are built to last. They’re also machinable and weldable, so you can modify them to suit the task at hand. A cable routing hole lets you feed cable, wire, and tubing through the center column to keep your setup neat.
    Mount your robot to the top of these pedestals with bolts (not included). They have standard mounting patterns, so they work with FANUC CRX, Universal Robots (UR), and other common robot arms. Use the mounting holes in the bottom plate to bolt them to your floor or another flat surface. If your surface is uneven, install fasteners or leveling mounts (both not included) in the threaded holes and adjust their depth until the pedestal is level.
    These pedestals are designed for robots moving at collaborative speeds—do not use them when your robot is moving at high speeds.
    Dollies—Attach to pedestals to roll your robot where you need it. The bottom of the pedestal has mounting holes that line up with those on the dolly. Attach them together with the included fasteners. To lock the casters, step on the pedal. Adjust the leveling feet to compensate for uneven floors.
    Dolly Anchors—Secure dollies to the floor for extra stability. You can also use these anchors to mark your robot’s working position—just align the dolly with the anchors. Bolt the anchors to the floor with fasteners (not included), then slide the leveling feet into the notch on each anchor. Tighten the wing nut for more holding power. You’ll need three anchors—one for each leveling foot.
    Robot Pedestals
    Dollies
    Dolly Anchors
    Floor
    Mounting Location
    Overall
    Ht.
    Robot Mount.
    Plate Dia.
    Static Load
    Cap., lb.
    Material
    Mount. Fasteners
    Included
    Plate
    Lg.
    Plate
    Wd.
    Mount. Hole Dia.
    (No. of Holes)
    Each
    Each
    Each
    For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), and Omron (TM 5, TM 12, TM 14)
    12"8"165Gray Powder-Coated SteelNo11 7/8"11 7/8"9/16" (4)6333N11100000006333N410000000006333N42000000
    18"8"165Gray Powder-Coated SteelNo11 7/8"11 7/8"9/16" (4)6333N1120000006333N41000000006333N4200000
    24"8"200Gray Powder-Coated SteelNo11 7/8"11 7/8"9/16" (4)6333N340000006333N41000000006333N4200000
     
    For FANUC (CRX 5iA, 10iA, 10iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), and Omron (TM 5, TM 12, TM 14)
    30"8"200Gray Powder-Coated SteelNo11 7/8"11 7/8"9/16" (4)6333N350000006333N41000000006333N4200000
    36"8"200Gray Powder-Coated SteelNo11 7/8"11 7/8"9/16" (4)6333N360000006333N41000000006333N4200000
    42"8"200Gray Powder-Coated SteelNo11 7/8"11 7/8"9/16" (4)6333N370000006333N41000000006333N4200000
    48"8"200Gray Powder-Coated SteelNo11 7/8"11 7/8"9/16" (4)6333N380000006333N41000000006333N4200000
     
    Accessories for Robot Pedestals
    Controller Mounts
    Image of ProductInUse. Controller Mount Shown with Controller (Not Included). Front orientation. Contains MultipleImages. Robot Controller Mounts. Collaborative Robot Pedestals, FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 30iA), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR15, UR16e, UR20, UR30), and Omron (TM 5, TM 12, TM 14).
    Image of Product. Controller Mount. Front orientation. Contains Annotated. Robot Controller Mounts. Collaborative Robot Pedestals, FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 30iA), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR15, UR16e, UR20, UR30), and Omron (TM 5, TM 12, TM 14).

    Controller Mount Shown with Controller

    (Not Included)

    Controller Mount

    Controller Mounts—Place your robot controller on these mounts to keep it off the floor and near your robot for neat cord routing. Secure them to your pedestal, then attach your controller to the mount with the included fasteners.
    Overall
    Ht.
    Lg.
    Wd.
    Material
    Each
    FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 30iA), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR15, UR16e, UR20, UR30), and Omron (TM 5, TM 12, TM 14)
    4 1/4"16 3/4"11"Gray Powder-Coated Steel6333N450000000
     
    Angle Mounting Adapters
    Image of ProductInUse. 45° Adapter Shown with Pedestal and Robot Arm (Not Included). Front orientation. Robot Controller Mounts. Collaborative Robot Pedestals, For FANUC CRX (5iA, 10iA, 10iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), and Omron (TM 5, TM 12, TM 14).

    45° Adapter Shown with

    Pedestal and Robot Arm (Not

    Included)

    Image of Product. 15° Adapter. Front orientation. Robot Controller Mounts. Collaborative Robot Pedestals, For FANUC CRX (5iA, 10iA, 10iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), and Omron (TM 5, TM 12, TM 14), 15° Angle.

    15° Adapter

    Image of Product. 45° Adapter. Front orientation. Robot Controller Mounts. Collaborative Robot Pedestals, For FANUC CRX (5iA, 10iA, 10iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), and Omron (TM 5, TM 12, TM 14), 45° Angle.

    45° Adapter

    Angle Mounting Adapters—Adjust the angle of your robot to change where it can reach. For example, use one of these adapters to tilt your robot forward so it can reach items close to the base of its pedestal. Mount them to the top of your pedestal using the included fasteners. You can use these adapters on pedestals up to 24" high.
    Overall
    Angle
    For Max.
    Pedestal Ht.
    Ht.
    Dia.
    Material
    Max. Load
    Cap., lb.
    Pedestal Mounting Location
    Fasteners Included
    Robot Mounting
    Location Plate Dia.
    Each
    For FANUC CRX (5iA, 10iA, 10iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), and Omron (TM 5, TM 12, TM 14)
    15°24"6 3/8"8"Gray Powder-Coated Steel165Yes8"6333N1170000000
    45°24"8 1/16"8"Gray Powder-Coated Steel165Yes8"6333N118000000
     
    Clamp-On Teach Pendant Holders
    Image of ProductInUse. Pedestal Shown with Teach Pendant Holder (Sold Separately). Front orientation. Teach Pendant Holders. Collaborative Robot Pedestals.
    Image of Product. Front orientation. Teach Pendant Holders. Collaborative Robot Pedestals.

    Pedestal Shown

    with Teach

    Pendant Holder

    (Sold

    Separately)

    Store your teach pendant right next to your robot for easy access. Simply clamp the mount onto your pedestal.
    For Controller
    Mfr. Model No.
    Material
    Lg.
    Wd.
    Ht.
    Mounting Fasteners
    Included
    Each
    For FANUC CRX (5iA, 10iA, 10iA/L, 20iA/L)
    R30iB Mini PlusGray Powder-Coated Steel7 1/2"4 1/2"11 3/4"Yes6333N1210000000
     
    For Universal Robots UR3e, UR5e, UR7e, UR10e, UR12e, UR15, UR16e
    —Gray Powder-Coated Steel8 1/2"3 1/8"12 1/8"Yes6333N119000000
     

    Robot Controller Mounts

    Image of ProductInUse. Front orientation. Contains Annotated. Robot Controller Mounts.
    Image of Product. Front orientation. Robot Controller Mounts.
    Store your robot controller off the floor. These mounts can also attach to your collaborative robot pedestal, keeping your controller close and cords tidy. Bolt your controller to the mount with the included fasteners.
    Overall
    For Robot Arm Mfr. (Series/Model No.)
    Ht.
    Lg.
    Wd.
    Material
    Each
    , FANUC (CRX 5iA, 10iA, 10iA/L) , and Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e)6 3/8"——Powder-Coated Steel6333N1170000000
    , FANUC (CRX 5iA, 10iA, 10iA/L) , and Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e)8 1/16"——Powder-Coated Steel6333N118000000
    For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 30iA)
    Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR15, UR16e, UR20, UR30)
    Omron (TM 5, TM 12, TM 14 )    		4 1/4"16 3/4"11"Powder-Coated Steel6333N45000000

    Robot Mounts for T-Slotted Framing

    Image of ProductInUse. Front orientation. Contains Annotated. Robot Mounts. Robot Mounts for T-Slotted Framing.
    Secure your robot arm to T-slotted framing. These mounts attach to your robot arm with fasteners (not included).
    Robot Mounts
    Image of Product. Front orientation. Robot Mounts. Robot Mounts for T-Slotted Framing, Robot Mounts.
    Robot mounts attach to the top of tables and workstations clad in T-slotted rails. They come with fasteners.
    For Robot Arm Mfr. (Series/Model No.)
    Wd.
    Lg.
    Thk.
    Material
    For T-Slot
    Ctr.-to-Ctr.
    Each
    FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L)
    Universal Robots (UR3; UR3e; UR5; UR5e; UR7e; UR10; UR10e; UR12e; UR16e)
    Dobot (CR 3S, 5S, 7, 10S, 12, 16; NOVA 2, 5)
    Omron (TM 5-700, 5-900)
    Igus (Rebel)
    Doosan (A0509; A0912; E0509; M0609; M0617; M1013)
    KUKA (KR 4 R600)    		8"8"3/4"Silver Anodized Aluminum1 1/2", 40 mm9347N110000000
    Robot Mounts with T-Slotted Rails
    Image of Product. Front orientation. Robot Mounts. Robot Mounts for T-Slotted Framing, Robot Mounts with T-Slotted Rails.
    Robot mounts with T-slotted rails attach to frames and other structures you’ve built from T-slotted framing. Because they have their own rails, you can also secure T-slotted components directly to them to further customize your setup. You’ll need your own brackets, nuts, and fasteners.
    Rail
    For Robot Arm Mfr.
    (Series/Model No.)
    Wd.
    Lg.
    Thk.
    Static Load
    Cap., lb.
    Material
    Profile
    Ht.
    Wd.
    T-Slot
    Wd.
    T-Slot
    Dp.
    Each
    Universal Robots (UR3; UR3e)11"11"1 7/8"125Silver Anodized AluminumSingle1 1/2"1 1/2"0.32"0.484"3136N7140000000

    Quick-Change Robot Mounts

    Image of System. Front orientation. Contains Annotated. Robot Mounts. Quick-Change Robot Mounts.
    Move your robot from workstation to workstation in seconds—no tools required. These mounts are useful when your shop uses one robot arm for multiple jobs. The two piece design lets you leave one mount on your work surface and one on your robot, so relocating is as quick as sliding the robot into place. Machined to tight tolerances for repeatability, these mounts lock your robot into the exact same position every time, so you don’t need to reprogram its movement.
    A complete setup requires one surface mount for each location and one robot mount for each arm (all sold separately).
    Surface Mounts
    Image of Product. Front orientation. Robot Mounts. Quick-Change Robot Mounts, Surface Mounts.
    O'all
    For Robot Arm Mfr.
    (Series/Model No.)
    Dia.
    Thk.
    Material
    Mounting Hole Dia.
    (No. of Holes)
    Mounting Fasteners
    Included
    Each
    Universal Robots (UR3; UR3e)5"1"Silver Anodized Aluminum1/4" (4)No9326N140000000
    Robot Mounts
    Image of Product. Front orientation. Robot Mounts. Quick-Change Robot Mounts, Robot Mounts.
    O'all
    For Robot Arm Mfr.
    (Series/Model No.)
    Dia.
    Thk.
    Material
    Mounting Hole Dia.
    (No. of Holes)
    Mounting Fasteners
    Included
    Each
    Universal Robots (UR3; UR3e)5"1 5/8"Silver Anodized Aluminum1/4" (4)No9326N11000000000
    Handles
    Image of ProductInUse. Shown Installed. Front orientation. Robot Mounts. Quick-Change Robot Mounts, Handles.
    Image of Product. Front orientation. Robot Mounts. Quick-Change Robot Mounts, Handles.

    Shown Installed

    Add a handle to the robot mount for a better grip when carrying your robot between stations.
    O'all
    For Robot Arm Mfr.
    (Series/Model No.)
    Lg.
    Wd.
    Thk.
    Material
    Grip
    Material
    Mounting Hole Dia.
    (No. of Holes)
    Mounting Fasteners
    Included
    Each
    Universal Robots (UR3; UR3e)8 5/8"5 7/8"3/16"Silver Anodized AluminumPlastic1/4" (4)No9326N170000000

    High-Capacity Robot Workstations

    Image of ProductInUse. Workstation Shown Raised. Front orientation. Contains Annotated. Robot Workstations. High-Capacity Robot Workstations.

    Workstation Shown Raised

    Support large robot arms and heavy payloads—these workstations can handle up to 1,800 pounds. With capacity to spare, add all the components and accessories you need for today’s job and tomorrow’s upgrades.
    Optimize these workstations to fit your setup. To get them at the height you need, you can raise and lower the legs in 1" increments. They have swivel casters too, so you can steer them into the right spot. Then, extend the casters’ leveling pad to keep the workstation in place and compensate for uneven floors. Store your robot controller, teach pendant, and other accessories on the shelf below to keep them accessible but out of the way.
    These workstations are compatible with many common robot arms—use the mounting holes on top and included fasteners to attach them. When used with large arms, such as the FANUC CRX-25iA or 30iA, these workstations must be anchored for stability and safety.
    Workstations
    Image of Product. Front orientation. ZoomedIn view. Robot Workstations. High-Capacity Robot Workstations, Workstations.
    Wt.
    Cap., lb.
    Overall
    For Robot Arm Mfr.
    (Series/Model No.)
    Top
    Overall
    Ht.
    Wd.
    Dp.
    Ht. Adjustment
    Increments
    Top Material
    Frame
    Material
    Wheel Configuration
    Foot
    Type
    Each
    Universal Robots (UR3, UR3e,
    UR5, UR5e, UR7e, UR10,
    UR10e, UR12e, UR16e)
    FANUC (CRX 5iA, 10iA, 10iA/L,
    20iA/L, 25iA, 30iA; CR 4, 7, 7L)
    Doosan (M0609, M0617, M1013, M1509)
    Omron (TM 5, 12, 14)    		1,4001,80030" to 38"40 1/4"36"1"Painted SteelPainted SteelFour Leveling CastersCaster5206N15000000000
    Hydraulic Lift Kits
    Image of Product. Front orientation. Hydraulic Lifts. High-Capacity Robot Workstations.
    Adjust the height of your work surface with the push of a button—no need to do it by hand. However, with these kits installed, the top capacity of your workstation is reduced to 700 lbs.
    Cylinder
    Wd.
    Material
    Cord Lg.,
    ft.
    Certification
    Each
    1 1/2"Aluminum
    		8UL Listed, CSA Certified
    		47105T23000000000

    T-Slotted Robot Workstations

    Image of ProductInUse. Robot Arm and Attached Tools Not Included. Front orientation. Robot Workstations. T-Slotted Robot Workstations.

    Robot Arm and Attached Tools Not

    Included

    With a top that’s T-slotted from edge to edge, these workstations let you endlessly adjust your robot and fixtures as you iterate setups. Optimize them to hold workpieces, trays, sensors, and more for a variety of robot tasks, from machine tending to dispensing glue. Use the included mount to secure FANUC CRX, Universal Robots (UR), or other common robot arms anywhere on the workstation top. These workstations come fully assembled with hardware to attach the mount to the workstation. However, you’ll need fasteners to attach your robot to the mount.
    These workstations have swivel casters with brakes, so you can roll them between jobs and lock them in place. Store your teach pendant, robot controller, and other accessories behind the cabinet doors below—or remove the doors for easy access.
    Wt.
    Cap., lb.
    Overall
    T-Slot
    For Robot Arm Mfr. (Series/Model No.)
    Top
    Thk.
    Top
    Overall
    Ht.
    Wd.
    Dp.
    No.
    of
    Wd.
    Dp.
    Ctr.-to-Ctr.
    Top Material
    Frame Material
    Wheel
    Configuration
    Foot
    Type
    Each
    FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L)
    Universal Robots (UR3, UR3e, UR5, UR5e,
    UR7e, UR10, UR10e, UR12e, UR16e)
    Dobot (CR 3S, 5S, 7, 10S, 12, 16; NOVA 2, 5)
    Omron (TM 5-700, 5-900)
    Igus (Rebel)
    Doosan (A0509, A0912, E0509, M0609,
    M0617, M1013)
    KUKA (KR 4 R600)     		3"93093037 1/2"63"31 1/2"210.32"0.484"1 1/2", 40 mmAnodized AluminumAnodized AluminumFour Swivel CastersCaster9351N11000000000

    T-Slotted Collaborative Robot Pedestals

    Image of ProductInUse. Shown with Robot Arm (Not Included). Front orientation. Robot Pedestals. T-Slotted Collaborative Robot Pedestals.

    Shown with Robot Arm (Not

    Included)

    Made entirely of T-slotted rails, these pedestals give you the most flexibility for mounting accessories. Create a custom solution tailored to your application—mount a tray for staging parts, add a bin for rejected parts, and keep your controller easily accessible, to name just a few options. These pedestals lift robots high enough to reach into machines or onto surfaces such as conveyor belts. Attach your robot to the top with the included mount and your own bolts. The hole patterns work with FANUC CRX, Universal Robots (UR), and other common robot arms.
    These pedestals are designed for robots moving at collaborative speeds—do not use them when your robot is moving at high speeds.
    Stationary Pedestals
    Image of Product. Front orientation. Robot Pedestals. T-Slotted Collaborative Robot Pedestals, Stationary Pedestals.
    Permanently install these pedestals by bolting them to the floor.
    Robot
    Mounting Location
    Floor Mounting Location
    T-Slot
    Overall
    Ht.
    Plate
    Lg.
    Plate
    Wd.
    Static Load
    Cap., lb.
    Material
    Plate
    Lg.
    Plate
    Wd.
    Mount. Hole Dia.
    (No. of Holes)
    Mount. Fasteners
    Included
    Wd.
    Dp.
    Each
    For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), Dobot (CR3S, CR5S, CR7, CR10S, CR12, CR16, NOVA 2, NOVA 5), Omron (TM 5-700, 5-900), Igus (Rebel), Doosan (A0509, A0912, M0609, M0617, M1013, E0509), and KUKA (KR 4 R600)
    23 1/2"8"8"720Silver Anodized Aluminum12"12"17/32" (4)Yes5/16"1/2"9480N339000000000
    35 1/2"8"8"720Silver Anodized Aluminum12"12"17/32" (4)Yes5/16"1/2"9480N34100000000
    47 1/4"8"8"720Silver Anodized Aluminum12"12"17/32" (4)Yes5/16"1/2"9480N34200000000
     
    Rolling Pedestals
    Image of Product. Front orientation. Robot Pedestals. T-Slotted Collaborative Robot Pedestals, Rolling Pedestals.
    Roll these pedestals where you need them. Once they’re in position, extend the leveling pads to keep them in place and compensate for uneven floors.
    Robot
    Mounting Location
    Load
    Cap.
    Base
    T-Slot
    Overall
    Ht.
    Plate
    Lg.
    Plate
    Wd.
    Static
    Dynamic
    Foot
    Type
    Lg.
    Wd.
    Material
    Wd.
    Dp.
    Each
    For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), Dobot (CR3S, CR5S, CR7, CR10S, CR12, CR16, NOVA 2, NOVA 5), Omron (TM 5-700, 5-900), Igus (Rebel), Doosan (A0509, A0912, M0609, M0617, M1013, E0509), and KUKA (KR 4 R600)
    23 1/2"8"8"Not RatedNot RatedCaster31 3/4"37 3/4"Silver Anodized Aluminum5/16"1/2"9480N333000000000
    35 1/2"8"8"Not RatedNot RatedCaster31 3/4"37 3/4"Silver Anodized Aluminum5/16"1/2"9480N33400000000
    47 1/4"8"8"Not RatedNot RatedCaster31 3/4"37 3/4"Silver Anodized Aluminum5/16"1/2"9480N33500000000
     

    Telescoping Pedestals for Universal Robots

    Image of ProductInUse. Shown with Robot Arm (Not Included). Front orientation. Robot Pedestals. Telescoping Pedestals for Universal Robots.
    Image of Product. Fully Extended. Back orientation. Contains Annotated. Robot Pedestals. Telescoping Pedestals for Universal Robots.
    Image of Product. Retracted. Back orientation. Contains Annotated. Robot Pedestals. Telescoping Pedestals for Universal Robots.

    Shown with

    Robot

    Arm (Not

    Included)

    Fully Extended

    Retracted

    Take your robot arm to new heights—these pedestals move up and down to extend your robot’s vertical reach for high and low stacking jobs. Often used to palletize boxes as they come off a conveyor, they start at ground level and extend as the stack gets higher. They’re UR+ certified, so they’ve been tested to work seamlessly with your robot. Download the free URCap plug-in, then use your teach pendant to sync their speed and movement with your robot’s work cycle. You can program these pedestals to move a set distance from their current position or height from the floor.
    These pedestals have holes on the top to mount your robot and holes on the base to bolt it to the floor. Connect them to a 24V DC power supply with the included 16 ft. cord. You’ll also need an Ethernet cord to connect them to your robot controller. A cable management system ensures your cables won’t tangle as these pedestals move.
    When these pedestals are used with the UR20 and UR30, run your robot at collaborative speed, not high speed.
    Overall
    Ht., mm
    Robot Mounting
    Location, mm
    Load
    Cap., lb.
    Floor Mounting Location
    Travel
    Ht., mm
    When
    Retracted
    When
    Extended
    Plate
    Lg.
    Plate
    Wd.
    Position
    Accuracy
    Max. Travel
    Speed, mm/s
    Dynamic
    Static
    Voltage,
    V DC
    Current,
    amp
    Plate Lg.,
    mm
    Plate Wd.,
    mm
    Mount. Hole Dia.
    (No. of Holes)
    Mount. Fasteners
    Included
    Each
    For Universal Robots (UR3, UR5, UR10, UR16, UR20, UR30)
    9007301,630264264±1.5 mm1001,0002,20024212002006.3 mm (8)Yes3814N21000000000
    1,1008301,930264264±1.5 mm1001,0002,20024212002006.3 mm (8)Yes3814N2200000000
     
    back to top