Filter by
For Robot Arm Manufacturer Series
For Robot Arm Manufacturer Model Number
Mounting Location
Robot Cell Component
Mobility
Number of T-Slots
Mounting Plate Shape
System of Measurement
Overall Height
Mount Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Wheel Configuration
High-Capacity Robot Workstations
 |
Workstation Shown Raised |
Support large robot arms and heavy payloads—these workstations can handle up to 1,800 pounds. With capacity to spare, add all the components and accessories you need for today’s job and tomorrow’s upgrades.
Optimize these workstations to fit your setup. To get them at the height you need, you can raise and lower the legs in 1" increments. They have swivel casters too, so you can steer them into the right spot. Then, extend the casters’ leveling pad to keep the workstation in place and compensate for uneven floors. Store your robot controller, teach pendant, and other accessories on the shelf below to keep them accessible but out of the way.
These workstations are compatible with many common robot arms—use the mounting holes on top and included fasteners to attach them. When used with large arms, such as the FANUC CRX-25iA or 30iA, these workstations must be anchored for stability and safety.
Workstations
 |
Wt. Cap., lb. | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Robot Arm Mfr. (Series/Model No.) | Top | Overall | Ht. | Wd. | Dp. | Ht. Adjustment Increments | Top Material | Frame Material | Wheel Configuration | Foot Type | Each | ||
| Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA, 30iA; CR 4, 7, 7L) Doosan (M0609, M0617, M1013, M1509) Omron (TM 5, 12, 14) | 1,400 | 1,800 | 30" to 38" | 40 1/4" | 36" | 1" | Painted Steel | Painted Steel | Four Leveling Casters | Caster | 5206N15 | 000000000 | |
Hydraulic Lift Kits
 |
Cylinder | ||||||
|---|---|---|---|---|---|---|
Wd. | Material | Cord Lg., ft. | Certification | Each | ||
| 1 1/2" | Aluminum | 8 | UL Listed, CSA Certified | 47105T23 | 000000000 | |
T-Slotted Robot Workstations
 |
Robot Arm and Attached Tools Not Included |
With a top that’s T-slotted from edge to edge, these workstations let you endlessly adjust your robot and fixtures as you iterate setups. Optimize them to hold workpieces, trays, sensors, and more for a variety of robot tasks, from machine tending to dispensing glue. Use the included mount to secure FANUC CRX, Universal Robots (UR), or other common robot arms anywhere on the workstation top. These workstations come fully assembled with hardware to attach the mount to the workstation. However, you’ll need fasteners to attach your robot to the mount.
These workstations have swivel casters with brakes, so you can roll them between jobs and lock them in place. Store your teach pendant, robot controller, and other accessories behind the cabinet doors below—or remove the doors for easy access.
Wt. Cap., lb. | Overall | T-Slot | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Robot Arm Mfr. (Series/Model No.) | Top Thk. | Top | Overall | Ht. | Wd. | Dp. | No. of | Wd. | Dp. | Ctr.-to-Ctr. | Top Material | Frame Material | Wheel Configuration | Foot Type | Each | ||
| FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L) Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e) Dobot (CR 3S, 5S, 7, 10S, 12, 16; NOVA 2, 5) Omron (TM 5-700, 5-900) Igus (Rebel) Doosan (A0509, A0912, E0509, M0609, M0617, M1013) KUKA (KR 4 R600) | 3" | 930 | 930 | 37 1/2" | 63" | 31 1/2" | 21 | 0.32" | 0.484" | 1 1/2", 40 mm | Anodized Aluminum | Anodized Aluminum | Four Swivel Casters | Caster | 9351N11 | 000000000 | |
| FANUC (CRX 25iA, 30iA) Universal Robots (UR20, UR30) ABB (IRB 1300) AUBO (i/20) Omron (TM 12, 14, 16, 20) Doosan (H) | 3" | 930 | 930 | 37 1/2" | 63" | 31 1/2" | 21 | 0.32" | 0.484" | 1 1/2", 40 mm | Anodized Aluminum | Anodized Aluminum | Four Swivel Casters | Caster | 9351N12 | 00000000 | |
Robot Mounts for T-Slotted Framing
 |
Secure your robot arm to T-slotted framing. These mounts attach to your robot arm with fasteners (not included).
Robot Mounts
 |
Robot mounts attach to the top of tables and workstations clad in T-slotted rails. They come with fasteners.
For Robot Arm Mfr. (Series/Model No.) | Wd. | Lg. | Thk. | Material | For T-Slot Ctr.-to-Ctr. | Each | ||
|---|---|---|---|---|---|---|---|---|
| FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L) Universal Robots (UR3; UR3e; UR5; UR5e; UR7e; UR10; UR10e; UR12e; UR16e) Dobot (CR 3S, 5S, 7, 10S, 12, 16; NOVA 2, 5) Omron (TM 5-700, 5-900) Igus (Rebel) Doosan (A0509; A0912; E0509; M0609; M0617; M1013) KUKA (KR 4 R600) | 8" | 8" | 3/4" | Silver Anodized Aluminum | 1 1/2", 40 mm | 9347N11 | 0000000 | |
| FANUC (CRX 25iA, 30iA) Universal Robots (UR20; UR30) ABB (IRB 1300) AUBO (i 20) Omron (TM 12, 14, 16, 20) Doosan (H) | 12" | 12" | 3/4" | Silver Anodized Aluminum | 1 1/2", 40 mm | 9347N12 | 000000 |
T-Slotted Collaborative Robot Pedestals
 |
Shown with Robot Arm (Not Included) |
Made entirely of T-slotted rails, these pedestals give you the most flexibility for mounting accessories. Create a custom solution tailored to your application—mount a tray for staging parts, add a bin for rejected parts, and keep your controller easily accessible, to name just a few options. These pedestals lift robots high enough to reach into machines or onto surfaces such as conveyor belts. Attach your robot to the top with the included mount and your own bolts. The hole patterns work with FANUC CRX, Universal Robots (UR), and other common robot arms.
These pedestals are designed for robots moving at collaborative speeds—do not use them when your robot is moving at high speeds.
Stationary Pedestals
 |
Permanently install these pedestals by bolting them to the floor.
Robot Mounting Location | Floor Mounting Location | T-Slot | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Ht. | Plate Lg. | Plate Wd. | Static Load Cap., lb. | Material | Plate Lg. | Plate Wd. | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Wd. | Dp. | Each | |||
For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), Dobot (CR3S, CR5S, CR7, CR10S, CR12, CR16, NOVA 2, NOVA 5), Omron (TM 5-700, 5-900), Igus (Rebel), Doosan (A0509, A0912, M0609, M0617, M1013, E0509), and KUKA (KR 4 R600) | ||||||||||||||
| 23 1/2" | 8" | 8" | 720 | Silver Anodized Aluminum | 12" | 12" | 17/32" (4) | Yes | 5/16" | 1/2" | 9480N339 | 000000000 | ||
| 35 1/2" | 8" | 8" | 720 | Silver Anodized Aluminum | 12" | 12" | 17/32" (4) | Yes | 5/16" | 1/2" | 9480N341 | 00000000 | ||
| 47 1/4" | 8" | 8" | 720 | Silver Anodized Aluminum | 12" | 12" | 17/32" (4) | Yes | 5/16" | 1/2" | 9480N342 | 00000000 | ||
For FANUC (CRX 25iA, 30iA), Universal Robots (UR20, UR30), ABB (IRB1300), AUBO (i20), Doosan (H Series), and Omron (TM 12, 14, 16, 20) | ||||||||||||||
| 23 1/2" | 12" | 12" | 720 | Silver Anodized Aluminum | 12" | 12" | 17/32" (4) | Yes | 5/16" | 1/2" | 9480N343 | 00000000 | ||
| 35 1/2" | 12" | 12" | 720 | Silver Anodized Aluminum | 12" | 12" | 17/32" (4) | Yes | 5/16" | 1/2" | 9480N344 | 00000000 | ||
| 47 1/4" | 12" | 12" | 720 | Silver Anodized Aluminum | 12" | 12" | 17/32" (4) | Yes | 5/16" | 1/2" | 9480N345 | 00000000 | ||
Rolling Pedestals
 |
Roll these pedestals where you need them. Once they’re in position, extend the leveling pads to keep them in place and compensate for uneven floors.
Robot Mounting Location | Load Cap. | Base | T-Slot | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Ht. | Plate Lg. | Plate Wd. | Static | Dynamic | Foot Type | Lg. | Wd. | Material | Wd. | Dp. | Each | |||
For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L), Universal Robots (UR3, UR3e, UR5, UR5e, UR7e, UR10, UR10e, UR12e, UR16e), Dobot (CR3S, CR5S, CR7, CR10S, CR12, CR16, NOVA 2, NOVA 5), Omron (TM 5-700, 5-900), Igus (Rebel), Doosan (A0509, A0912, M0609, M0617, M1013, E0509), and KUKA (KR 4 R600) | ||||||||||||||
| 23 1/2" | 8" | 8" | Not Rated | Not Rated | Caster | 31 3/4" | 37 3/4" | Silver Anodized Aluminum | 5/16" | 1/2" | 9480N333 | 000000000 | ||
| 35 1/2" | 8" | 8" | Not Rated | Not Rated | Caster | 31 3/4" | 37 3/4" | Silver Anodized Aluminum | 5/16" | 1/2" | 9480N334 | 00000000 | ||
| 47 1/4" | 8" | 8" | Not Rated | Not Rated | Caster | 31 3/4" | 37 3/4" | Silver Anodized Aluminum | 5/16" | 1/2" | 9480N335 | 00000000 | ||
For FANUC (CRX 25iA, 30iA), Universal Robots (UR20, UR30), ABB (IRB1300), AUBO (i20), Doosan (H Series), and Omron (TM 12, 14, 16, 20) | ||||||||||||||
| 23 1/2" | 12" | 12" | Not Rated | Not Rated | Caster | 31 3/4" | 37 3/4" | Silver Anodized Aluminum | 5/16" | 1/2" | 9480N336 | 00000000 | ||
| 35 1/2" | 12" | 12" | Not Rated | Not Rated | Caster | 31 3/4" | 37 3/4" | Silver Anodized Aluminum | 5/16" | 1/2" | 9480N337 | 00000000 | ||
| 47 1/4" | 12" | 12" | Not Rated | Not Rated | Caster | 31 3/4" | 37 3/4" | Silver Anodized Aluminum | 5/16" | 1/2" | 9480N338 | 00000000 | ||
