McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    139 Products

    Robot Arm Covers

    Shield your robot arm from dirt and damage with these covers. They’re designed to fit specific robot models, so they’re easy to install and remove—you don’t need to cut, sew, or customize them. Choose a cover that matches the manufacturer and model number of your arm.
    Polyester Fabric
    Image of ProductInUse. Upper Arm. Front orientation. Robot Arm Covers. Polyester Fabric, Covers Upper Robot Arm.
    Image of ProductInUse. Lower Arm. Front orientation. Robot Arm Covers. Polyester Fabric, Covers Lower Robot Arm.
    Image of ProductInUse. Front orientation. Robot Arm Covers. Polyester Fabric, Covers Full Robot Arm.

    Upper Arm

    Lower Arm

    Covers Full Robot Arm

    Polyester fabric covers are a good choice for most painting applications. These covers are clean room laundered, HEPA dried, and individually vacuum sealed, so they won’t shed dust or fibers onto wet paint or coatings. They also absorb paint, oil, and other fluids to keep them from dripping onto your work surface. These covers protect your arm from light paint splashes and spills, but large amounts of fluid will soak through the fabric. Use the snaps on covers for Fanuc arms to easily install and remove them. Covers for Universal Robots (UR) arms are made from a stretchy fabric that hugs your arm without restricting its movement.
    Each
    For Robot Arm Mfr.
    (Series/Model No.)
    Reusable
    1-4
    5-Up
    Covers Upper Robot Arm
    FANUC (LR Mate 200iD/7L)No00000000000000000000
     
    Covers Lower Robot Arm
    FANUC (LR Mate 200iD/7L)No000000000000000000
     
    Covers Full Robot Arm
    FANUC (LR Mate 200iD/7L)No00000000000000000
    Universal Robots (UR10, UR10e)No000000000000000000
    Universal Robots (UR3, UR3e)No000000000000000000
    Universal Robots (UR5, UR5e)No000000000000000000
     
    Plastic-Laminated Polyester Fabric
    Image of Product. Front orientation. Robot Arm Covers. Plastic-Laminated Polyester Fabric.
    Plastic-laminated polyester fabric covers are nonabsorbent, so they’ll keep paint, water, and other liquids from damaging your robot arm. They are also washed, dried, and individually vacuum sealed in clean rooms, so they won’t shed dust or fibers onto wet paint or coatings. Elastic bands built into these covers keep them in place while the robot moves. They’re often used for powder-coat painting, since you can clean the powder coat off of the surface and recycle it. Liquids won’t soak through these covers, unless they are corrosive.
    Each
    For Robot Arm Mfr.
    (Series/Model No.)
    Reusable
    1-4
    5-Up
    Covers Full Robot Arm
    Universal Robots (UR10, UR10e)No00000000000000000000
    Universal Robots (UR5, UR5e)No000000000000000000
     
    PVC/Vinyl Plastic
    Image of ProductInUse. Front orientation. Robot Arm Covers. PVC/Vinyl Plastic.
    PVC/vinyl plastic covers are more abrasion resistant than polyester, so they’re often used for robot arms in applications such as sorting, packing, and loading. They protect your arm from dust, powders, and water-soluble coolants and cutting fluids. These covers are not waterproof, but they will provide some protection from water and other liquids.
    For Robot Arm Mfr.
    (Series/Model No.)
    Reusable
    Each
    Covers Full Robot Arm
    AUBO (i3)Yes0000000000000000
    AUBO (i5)Yes000000000000000
    FANUC (LR Mate 200iD)Yes000000000000000
    FANUC (LR Mate 200iD/4S)Yes000000000000000
    FANUC (LR Mate 200iD/7L)Yes000000000000000
    FANUC (LR Mate 200iD/7LC)Yes000000000000000
    FANUC (M10iA/10M)Yes000000000000000
    FANUC (M10iA/10MS)Yes0000000000000000
    FANUC (M10iA/12)Yes000000000000000
    FANUC (M10iA/12S)Yes000000000000000
    FANUC (M10iA/7L)Yes000000000000000
    FANUC (M20iA)Yes000000000000000
    FANUC (M20iA/10L)Yes000000000000000
    FANUC (M20iA/20M)Yes000000000000000
    FANUC (M20iA/35)Yes000000000000000
    FANUC (M20iA/35M)Yes000000000000000
    Universal Robots (UR10, UR10e)Yes0000000000000000
    Universal Robots (UR16, UR16e)Yes0000000000000000
    Universal Robots (UR3, UR3e)Yes000000000000000
    Universal Robots (UR5, UR5e)Yes000000000000000
    Yaskawa Motoman (HC10)Yes000000000000000
    Yaskawa Motoman (HC10DT)Yes000000000000000
     
    CSM/Vinyl Plastic
    Image of ProductInUse. Front orientation. Robot Arm Covers. CSM/Vinyl Plastic.
    Use CSM/vinyl plastic covers to protect your arms from heavy abrasion, such as from flying chips. They’re durable, cut and tear resistant, and they last up to three times longer than PVC/vinyl plastic covers. These covers are often used for robot arms in cutting and deburring applications. They provide some protection from water and other liquids, but they are not waterproof. They’ll also break down from amines, which are commonly found in cleaners.
    For Robot Arm Mfr.
    (Series/Model No.)
    Reusable
    Each
    Covers Full Robot Arm
    AUBO (i3)Yes0000000000000000
    AUBO (i5)Yes000000000000000
    FANUC (LR Mate 200iD)Yes000000000000000
    FANUC (LR Mate 200iD/4S)Yes000000000000000
    FANUC (LR Mate 200iD/7L)Yes000000000000000
    FANUC (LR Mate 200iD/7LC)Yes000000000000000
    FANUC (M10iA/10M)Yes000000000000000
    FANUC (M10iA/10MS)Yes000000000000000
    FANUC (M10iA/12)Yes000000000000000
    FANUC (M10iA/12S)Yes000000000000000
    FANUC (M10iA/7L)Yes000000000000000
    FANUC (M20iA)Yes000000000000000
    FANUC (M20iA/10L)Yes000000000000000
    FANUC (M20iA/20M)Yes000000000000000
    FANUC (M20iA/35)Yes000000000000000
    FANUC (M20iA/35M)Yes000000000000000
    Universal Robots (UR10, UR10e)Yes0000000000000000
    Universal Robots (UR16, UR16e)Yes0000000000000000
    Universal Robots (UR3, UR3e)Yes000000000000000
    Universal Robots (UR5, UR5e)Yes000000000000000
    Yaskawa Motoman (HC10)Yes000000000000000
    Yaskawa Motoman (HC10DT)Yes000000000000000
     
    Plastic-Laminated Teflon® PTFE
    Image of ProductInUse. Front orientation. Robot Arm Covers. Plastic-Laminated Teflon® PTFE.
    Plastic-laminated Teflon® PTFE covers are designed for use in sanitary or food processing areas. They protect your robot arms from liquids, and they’ll hold up to frequent washdowns with harsh chemicals. They’re also FDA compliant for direct contact with food.
    For Robot Arm Mfr.
    (Series/Model No.)
    Reusable
    Food Industry Std.
    Each
    Covers Full Robot Arm
    AUBO (i3)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.32970000000000000000
    AUBO (i5)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (LR Mate 200iD)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (LR Mate 200iD/4S)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (LR Mate 200iD/7L)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (LR Mate 200iD/7LC)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M10iA/10M)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M10iA/10MS)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M10iA/12)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M10iA/12S)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M10iA/7L)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M20iA)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M20iA/10L)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M20iA/20M)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M20iA/35)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    FANUC (M20iA/35M)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    Universal Robots (UR10, UR10e)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.32970000000000000000
    Universal Robots (UR16, UR16e)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.32970000000000000000
    Universal Robots (UR3, UR3e)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    Universal Robots (UR5, UR5e)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.32970000000000000000
    Yaskawa Motoman (HC10)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
    Yaskawa Motoman (HC10DT)YesFDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297000000000000000
     
    Aluminum-Coated Kevlar Fabric
    Image of ProductInUse. Front orientation. Robot Arm Covers. Aluminum-Coated Kevlar Fabric.
    For extreme temperature applications, use Kevlar covers. They have the largest temperature range of any cover material, so you can insulate your robot arm in freezers, near ovens and furnaces, and in welding applications. They have an insulation R-value of 0.07, which means they protect your arm from extreme temperature changes.
    For Robot Arm Mfr.
    (Series/Model No.)
    Reusable
    Temp. Range,
    ° F
    Insulation
    R Value
    Each
    Covers Full Robot Arm
    AUBO (i3)Yes-65 to 1,5000.070000000000000000
    AUBO (i5)Yes-65 to 1,5000.07000000000000000
    FANUC (ARC Mate 120iC)Yes-65 to 1,5000.07000000000000000
    FANUC (ARC Mate 120iC/10L)Yes-65 to 1,5000.07000000000000000
    FANUC (LR Mate 200iD)Yes-65 to 1,5000.07000000000000000
    FANUC (LR Mate 200iD/4S)Yes-65 to 1,5000.07000000000000000
    FANUC (LR Mate 200iD/7L)Yes-65 to 1,5000.07000000000000000
    FANUC (LR Mate 200iD/7LC)Yes-65 to 1,5000.07000000000000000
    FANUC (M10iA/10M)Yes-65 to 1,5000.07000000000000000
    FANUC (M10iA/10MS)Yes-65 to 1,5000.07000000000000000
    FANUC (M10iA/12)Yes-65 to 1,5000.07000000000000000
    FANUC (M10iA/12S)Yes-65 to 1,5000.07000000000000000
    FANUC (M10iA/7L)Yes-65 to 1,5000.07000000000000000
    FANUC (M20iA)Yes-65 to 1,5000.07000000000000000
    FANUC (M20iA/10L)Yes-65 to 1,5000.07000000000000000
    FANUC (M20iA/20M)Yes-65 to 1,5000.07000000000000000
    FANUC (M20iA/35)Yes-65 to 1,5000.07000000000000000
    FANUC (M20iA/35M)Yes-65 to 1,5000.07000000000000000
    Universal Robots (UR10, UR10e)Yes-65 to 1,5000.070000000000000000
    Universal Robots (UR16, UR16e)Yes-65 to 1,5000.070000000000000000
    Universal Robots (UR3, UR3e)Yes-65 to 1,5000.07000000000000000
    Universal Robots (UR5, UR5e)Yes-65 to 1,5000.07000000000000000
    Yaskawa Motoman (HC10)Yes-65 to 1,5000.07000000000000000
    Yaskawa Motoman (HC10DT)Yes-65 to 1,5000.07000000000000000
     
    Aluminum-Coated Kevlar Fabric—Climate Controlled
    Image of ProductInUse. Climate-Controlled Cover with Heating and Cooling Unit (Sold Separately). Front orientation. Robot Arm Covers. Aluminum-Coated Kevlar Fabric—Climate Controlled.

    Climate-Controlled Cover with

    Heating and Cooling Unit (Sold

    Separately)

    For extreme temperature applications, use Kevlar covers. They have the largest temperature range of any cover material, so you can insulate your robot arm in freezers, near ovens and furnaces, and in welding applications. They have an insulation R-value of 0.07, which means they protect your arm from extreme temperature changes.
    Climate-controlled covers fill with hot or cold air to keep your robot running within its recommended operating temperature range in extreme environments, such as freezers or furnaces. The air can limit a robot’s range of motion, so only use these covers if your robot will be working consistently in very hot or cold areas. These covers require heating and cooling units (sold separately), which connect to ports in the stainless steel base of the covers.
    Air
    Connection
    For Robot Arm Mfr.
    (Series/Model No.)
    Reusable
    Temp. Range,
    ° F
    Insulation
    R Value
    For Hose
    ID
    Type
    Gender
    Securing
    Method
    Each
    Covers Full Robot Arm
    Universal Robots (UR10, UR10e)Yes-65 to 1,5000.072"HoseFemaleHook and Loop00000000000000000
    Universal Robots (UR5, UR5e)Yes-65 to 1,5000.072"HoseFemaleHook and Loop0000000000000000
     
    Heating and Cooling Units
    Image of Product. Front orientation. Heating and Cooling Units for Robot Arm Covers. Climate Controlled.
    These units have a built-in thermostat—adjust its set point, and the unit will run until it reaches that temperature.
    Housing
    Air
    Connection
    Component
    Set Temp.
    Range, ° F
    Current,
    amp
    Voltage, V AC
    Lg.
    Wd.
    Ht.
    For Hose
    ID
    Type
    Style
    Gender
    Includes
    Each
    Heating Unit0 to 2409208/23015"15"9"2"HoseBarbedMaleAir Hose (25 ft.)00000000000000000
    Cooling Unit0 to 2405208/23015"15"9"2"HoseBarbedMaleAir Hose (25 ft.)0000000000000000
    Heating and Cooling Unit0 to 2409208/23015"15"9"2"HoseBarbedMaleAir Hose (25 ft.)0000000000000000

    Chemical-Resistant Robot Arm Covers

    Image of Product. Front orientation. Robot Arm Covers. Chemical-Resistant Robot Arm Covers.
    Protect your robot arm from chemicals often used in food processing facilities and clean rooms. Made of polyurethane-laminated polyester, these covers hold up to hydrogen peroxide and mild disinfectants containing sodium hypochlorite. They also protect your robot arm from water and other liquids, but they’re not washdown rated.
    These covers are tailored for specific robot models—no need to cut, sew, or customize. They slide over your robot arm and close with hook and loop seams, so they’re simple to install and remove.
    Polyurethane-Laminated Polyester Fabric
    For Robot Arm Mfr.
    (Series/Model No.)
    Color
    Temp. Range,
    ° F
    Each
    Covers Robot Arm
    FANUC (CRX 5iA)White-20 to 2120000000000000000
    FANUC (CRX 10iA)White-20 to 212000000000000000
    FANUC (CRX 10iA/L)White-20 to 212000000000000000
    FANUC (CRX 20iA/L)White-20 to 212000000000000000
    FANUC (CRX 25iA)White-20 to 212000000000000000
    FANUC (CRX 30iA)White-20 to 212000000000000000
    Universal Robots (UR3e)White-20 to 2120000000000000
    Universal Robots (UR5e)White-20 to 2120000000000000
    Universal Robots (UR10e)White-20 to 2120000000000000
    Universal Robots (UR16e)White-20 to 2120000000000000
    Universal Robots (UR20)White-20 to 212000000000000000
    Universal Robots (UR30)White-20 to 2120000000000000
     

    Abrasion-Resistant Robot Arm Covers

    Image of Product. Front orientation. Robot Arm Covers. Abrasion-Resistant Robot Arm Covers.
    Shield your robot arm when you cut, grind, die-cast, and debur. Made of plastic-laminated polyester, these covers stand up to heavy abrasion, such as from metal chips. They also keep dust and debris out of your robot’s joints. Although they provide some protection from splashing water, they’re not washdown rated.
    These covers are tailored for specific robot models—no need to cut, sew, or customize them. They come in pieces with hook and loop seams, so installation and removal are easy.
    Plastic-Laminated Polyester Fabric
    For Robot Arm Mfr.
    (Series/Model No.)
    Color
    Temp. Range,
    ° F
    Each
    Covers Robot Arm
    FANUC (CRX 5iA)Gray32 to 1400000000000000000
    FANUC (CRX 10iA)Gray32 to 140000000000000000
    FANUC (CRX 10iA/L)Gray32 to 140000000000000000
    FANUC (CRX 20iA/L)Gray32 to 140000000000000000
    FANUC (CRX 25iA)Gray32 to 140000000000000000
    FANUC (CRX 30iA)Gray32 to 140000000000000000
    Universal Robots (UR3e)Gray32 to 140000000000000000
    Universal Robots (UR5e)Gray32 to 140000000000000000
    Universal Robots (UR10e)Gray32 to 140000000000000000
    Universal Robots (UR16e)Gray32 to 140000000000000000
    Universal Robots (UR20)Gray32 to 140000000000000000
    Universal Robots (UR30)Gray32 to 140000000000000000
     

    Heat- and Weld-Spatter-Resistant Robot Arm Covers

    Image of Product. Side1 orientation. Robot Arm Covers. Heat- and Weld-Spatter-Resistant Robot Arm Covers.
    Protect your robot arm from damage during welding. Made from an aramid-carbon blend, these covers hold up to sparks, and their aluminum coating reflects radiant heat. They also keep weld spatter from building up and weighing down the arm, so you can spend less time on maintenance. These covers are designed to fit specific robot models, so there’s no need to cut, sew, or customize them. They come in pieces that are easy to install or remove—use the hook and loop strips on the seams to join them.
    Aluminum-Coated Aramid/Carbon Fiber Fabric
    For Robot Arm Mfr.
    (Series/Model No.)
    Color
    Temp. Range,
    ° F
    Each
    Covers Robot Arm
    FANUC (CRX 5iA)Silver-235 to 1,2200000000000000000
    FANUC (CRX 10iA)Silver-235 to 1,220000000000000000
    FANUC (CRX 10iA/L)Silver-235 to 1,220000000000000000
    FANUC (CRX 20iA/L)Silver-235 to 1,220000000000000000
    FANUC (CRX 25iA)Silver-235 to 1,220000000000000000
    FANUC (CRX 30iA)Silver-235 to 1,220000000000000000
    Universal Robots (UR3e)Silver-235 to 1,220000000000000000
    Universal Robots (UR5e)Silver-235 to 1,220000000000000000
    Universal Robots (UR10e)Silver-235 to 1,220000000000000000
    Universal Robots (UR16e)Silver-235 to 1,220000000000000000
    Universal Robots (UR20)Silver-235 to 1,220000000000000000
    Universal Robots (UR30)Silver-235 to 1,220000000000000000
     
    back to top