DIN 444 Rod Ends | McMaster-Carr

Filter by

System of Measurement

Shank Thread Size

Shank Center Length

Rod End Type

Thread Size

Material

Shank Gender

Overall Thickness

Shank Threading

Shank Thread Length

Shank Thread Pitch

Shank Thread Direction

Thread Direction

Overall Width

Specifications Met

Tensile Strength

60,000 psi to 70,999 psi

71,000 psi to 79,999 psi

80,000 psi to 99,999 psi

REACH

Gender

Thickness

Width

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

Finish

278 Products

Corrosion-Resistant Fully Threaded Rod End Bolts

303 Stainless Steel

304 Stainless Steel

316 Stainless Steel

Image of Attribute. Front orientation. Contains Annotated, MultipleImages. Corrosion-Resistant Fully Threaded Rod End Bolts.

These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

303 Stainless Steel and 304 Stainless Steel—303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however.

316 Stainless Steel—316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.

ASTM A276 and ASTM A582—ASTM rod end bolts meet a standard for material.

DIN 444—DIN 444 rod end bolts meet an international standard for rod end dimensions.

	Shank
	Thread Size	Ctr. Lg., mm	Thread Lg., mm	ID, mm	Overall Wd., mm	Shank Threading	Overall Thk., mm	Tensile Strength, psi	Specs. Met		Each
Right-Hand Shank Thread







				303 Stainless Steel

				M5 × 0.8 mm	25	16	5	12	Fully Threaded	6	90,000	ASTM A582 DIN 444	2434K111	00000


				M5 × 0.8 mm	35	21	5	12	Fully Threaded	6	90,000	ASTM A582 DIN 444	2434K113	00000
				M5 × 0.8 mm	50	36	5	12	Fully Threaded	6	90,000	ASTM A582 DIN 444	2434K116	00000
				M5 × 0.8 mm	60	46	5	12	Fully Threaded	6	90,000	ASTM A582 DIN 444	2434K117	00000
				M6 × 1 mm	70	56	6	14	Fully Threaded	7	Not Rated	DIN 444	2434K836	0000
				M8 × 1.25 mm	30	22	8	18	Fully Threaded	9	70,000	DIN 444	2434K883	00000
				M8 × 1.25 mm	100	84	8	18	Fully Threaded	9	Not Rated	DIN 444	2434K838	0000
				M12 × 1.75 mm	130	107	12	25	Fully Threaded	14	Not Rated	DIN 444	2434K839	00000
				M16 × 2 mm	160	133	16	32	Fully Threaded	17	Not Rated	DIN 444	2434K841	00000




						304 Stainless Steel

						M6 × 1 mm	30	21	6	14	Fully Threaded	7	70,000	DIN 444	2434K876	00000


						M6 × 1 mm	40	31	6	14	Fully Threaded	7	70,000	DIN 444	2434K878	00000
						M6 × 1 mm	50	41	6	14	Fully Threaded	7	70,000	DIN 444	2434K881	00000
						M8 × 1.25 mm	35	24	8	18	Fully Threaded	9	70,000	DIN 444	2434K884	00000
						M8 × 1.25 mm	40	29	8	18	Fully Threaded	9	70,000	DIN 444	2434K885	00000
						M8 × 1.25 mm	45	34	8	18	Fully Threaded	9	70,000	DIN 444	2434K886	00000
						M8 × 1.25 mm	50	39	8	18	Fully Threaded	9	70,000	DIN 444	2434K887	00000
						M8 × 1.25 mm	60	49	8	18	Fully Threaded	9	70,000	DIN 444	2434K434	00000
						M8 × 1.25 mm	70	59	8	18	Fully Threaded	9	70,000	DIN 444	2434K889	00000
						M8 × 1.25 mm	90	79	8	18	Fully Threaded	9	70,000	DIN 444	2434K892	00000
						M10 × 1.5 mm	40	29	10	19	Fully Threaded	12	70,000	DIN 444	2434K894	00000


						M10 × 1.5 mm	50	39	10	19	Fully Threaded	12	70,000	DIN 444	2434K896	00000
						M10 × 1.5 mm	60	49	10	19	Fully Threaded	12	70,000	DIN 444	2434K897	00000
						M10 × 1.5 mm	80	69	10	19	Fully Threaded	12	70,000	DIN 444	2434K899	00000
						M10 × 1.5 mm	90	79	10	19	Fully Threaded	12	70,000	DIN 444	2434K911	00000
						M10 × 1.5 mm	100	89	10	19	Fully Threaded	12	70,000	DIN 444	2434K912	00000
						M10 × 1.5 mm	120	109	10	19	Fully Threaded	12	70,000	DIN 444	2434K914	00000
						M12 × 1.75 mm	60	46	12	24	Fully Threaded	14	70,000	DIN 444	2434K916	00000
						M12 × 1.75 mm	70	56	12	24	Fully Threaded	14	70,000	DIN 444	2434K917	00000
						M12 × 1.75 mm	90	76	12	24	Fully Threaded	14	70,000	DIN 444	2434K919	00000
						M12 × 1.75 mm	100	86	12	24	Fully Threaded	14	70,000	DIN 444	2434K921	00000


						M16 × 2 mm	100	83	16	31	Fully Threaded	17	70,000	DIN 444	2434K928	00000
						M16 × 2 mm	120	103	16	31	Fully Threaded	17	70,000	DIN 444	2434K931	00000
						M16 × 2 mm	140	123	16	31	Fully Threaded	17	70,000	DIN 444	2434K933	00000
						M20 × 2.5 mm	140	119	18	39	Fully Threaded	22	70,000	DIN 444	2434K939	000000
						M20 × 2.5 mm	160	139	18	39	Fully Threaded	22	70,000	DIN 444	2434K941	00000




								316 Stainless Steel

M6 × 1 mm								45	36	6	14	Fully Threaded	7	75,000	DIN 444	2434K945	00000


M6 × 1 mm	50							41	6	14	Fully Threaded	7	75,000	DIN 444	2434K946	00000
M6 × 1 mm	60							51	6	14	Fully Threaded	7	75,000	DIN 444	2434K947	00000
M6 × 1 mm	70	56						6	14	Fully Threaded	7	75,000	ASTM A276 DIN 444	2434K228	00000
M10 × 1.5 mm	40	29	10					19	Fully Threaded	12	75,000	DIN 444	2434K959	00000
M10 × 1.5 mm	50	39	10					19	Fully Threaded	12	75,000	DIN 444	2434K962	00000
M10 × 1.5 mm	70	59	10					19	Fully Threaded	12	75,000	DIN 444	2434K964	00000
M10 × 1.5 mm	100	89	10					19	Fully Threaded	12	75,000	DIN 444	2434K967	00000
M10 × 1.5 mm	120	109	10					19	Fully Threaded	12	75,000	DIN 444	2434K969	00000
M12 × 1.75 mm	70	56	12					24	Fully Threaded	14	75,000	DIN 444	2434K973	00000
M12 × 1.75 mm	80	66	12					24	Fully Threaded	14	75,000	DIN 444	2434K974	00000


M12 × 1.75 mm	90	76	12					24	Fully Threaded	14	75,000	DIN 444	2434K975	00000
M12 × 1.75 mm	100	86	12					24	Fully Threaded	14	75,000	DIN 444	2434K976	00000
M12 × 1.75 mm	120	106	12					24	Fully Threaded	14	75,000	DIN 444	2434K978	00000


Left-Hand Shank Thread







				303 Stainless Steel

				M5 × 0.8 mm	25			16	5	12	Fully Threaded	6	90,000	ASTM A582 DIN 444	2434K372	00000


				M5 × 0.8 mm	30			16	5	12	Fully Threaded	6	90,000	ASTM A582 DIN 444	2434K373	00000
				M6 × 1 mm	30			18	6	14	Fully Threaded	7	90,000	ASTM A582 DIN 444	2434K379	00000
				M6 × 1 mm	35			22	6	14	Fully Threaded	7	90,000	ASTM A582 DIN 444	2434K381	00000
				M8 × 1.25 mm	60			44	8	18	Fully Threaded	9	90,000	ASTM A582 DIN 444	2434K394	00000
				M8 × 1.25 mm	70			54	8	18	Fully Threaded	9	90,000	ASTM A582 DIN 444	2434K395	00000

Fully Threaded Rod End Bolts

For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

	Shank
	Thread Size	Ctr. Lg., mm	Thread Lg., mm	ID, mm	Overall Wd., mm	Shank Threading	Overall Thk., mm	Tensile Strength, psi	Specs. Met		Each
Right-Hand Shank Thread







				Black-Oxide Carbon Steel

				M5 × 0.8 mm	25	16	5	12	Fully Threaded	6	78,000	DIN 444	3798K111	00000


				M5 × 0.8 mm	50	36	5	12	Fully Threaded	6	78,000	DIN 444	3798K116	0000
				M6 × 1 mm	30	18	6	14	Fully Threaded	7	78,000	DIN 444	3798K118	0000
				M6 × 1 mm	40	26	6	14	Fully Threaded	7	78,000	DIN 444	3798K121	0000
				M6 × 1 mm	50	36	6	14	Fully Threaded	7	Not Rated	DIN 444	3798K61	0000
				M6 × 1 mm	60	46	6	14	Fully Threaded	7	Not Rated	DIN 444	3798K62	0000
				M6 × 1 mm	80	66	6	14	Fully Threaded	7	Not Rated	DIN 444	3798K63	0000
				M8 × 1.25 mm	30	22	8	18	Fully Threaded	9	78,000	DIN 444	3798K124	0000
				M8 × 1.25 mm	40	24	8	18	Fully Threaded	9	78,000	DIN 444	3798K126	00000
				M8 × 1.25 mm	50	34	8	18	Fully Threaded	9	Not Rated	DIN 444	3798K64	0000
				M8 × 1.25 mm	60	44	8	18	Fully Threaded	9	78,000	DIN 444	3798K128	00000


				M8 × 1.25 mm	70	54	8	18	Fully Threaded	9	78,000	DIN 444	3798K129	00000
				M8 × 1.25 mm	80	64	8	18	Fully Threaded	9	Not Rated	DIN 444	3798K65	0000
				M8 × 1.25 mm	90	74	8	18	Fully Threaded	11	78,000	DIN 444	3798K131	00000
				M8 × 1.25 mm	100	84	8	18	Fully Threaded	9	Not Rated	DIN 444	3798K66	0000
				M10 × 1.5 mm	50	32	10	20	Fully Threaded	12	Not Rated	DIN 444	3798K67	0000
				M10 × 1.5 mm	70	52	10	20	Fully Threaded	12	78,000	DIN 444	3798K135	00000
				M10 × 1.5 mm	80	62	10	20	Fully Threaded	12	Not Rated	DIN 444	3798K68	00000
				M10 × 1.5 mm	100	82	10	20	Fully Threaded	12	Not Rated	DIN 444	3798K69	00000
				M10 × 1.5 mm	120	102	10	20	Fully Threaded	12	Not Rated	DIN 444	3798K71	00000
				M12 × 1.75 mm	50	27	12	25	Fully Threaded	14	Not Rated	DIN 444	3798K72	00000


				M12 × 1.75 mm	70	47	12	25	Fully Threaded	14	Not Rated	DIN 444	3798K73	00000
				M12 × 1.75 mm	100	77	12	25	Fully Threaded	14	Not Rated	DIN 444	3798K74	00000
				M12 × 1.75 mm	130	107	12	25	Fully Threaded	14	Not Rated	DIN 444	3798K75	00000
				M16 × 2 mm	60	38	16	32	Fully Threaded	19	78,000	DIN 444	3798K145	00000
				M16 × 2 mm	70	43	16	32	Fully Threaded	17	Not Rated	DIN 444	3798K76	00000
				M16 × 2 mm	100	73	16	32	Fully Threaded	17	Not Rated	DIN 444	3798K77	00000
				M16 × 2 mm	140	113	16	32	Fully Threaded	17	Not Rated	DIN 444	3798K78	00000
				M16 × 2 mm	160	133	16	32	Fully Threaded	17	Not Rated	DIN 444	3798K79	00000
				M20 × 2.5 mm	100	68	18	40	Fully Threaded	22	Not Rated	DIN 444	3798K81	00000
				M20 × 2.5 mm	120	88	18	40	Fully Threaded	22	Not Rated	DIN 444	3798K82	00000


				M20 × 2.5 mm	160	128	18	40	Fully Threaded	22	Not Rated	DIN 444	3798K84	00000
				M24 × 3 mm	160	120	22	45	Fully Threaded	25	Not Rated	DIN 444	3798K85	00000

Partially Threaded Rod End Bolts

Create pivoting connections in applications that require high shear strength—the partially threaded shank of these rod end bolts withstands more side force than a fully threaded shank. Also known as swing bolts and eyebolts, they are used to create hinges, turnbuckles, and tie downs. Unlike ball joint rod ends, these rod end bolts are made from a single piece of metal, so they wear down more slowly and have a more controlled swing. However, because they do not have a moving ball joint, they do not compensate for angular misalignment. Made from steel, they are stronger and more wear resistant than stainless steel rod end bolts, but they are not as corrosion resistant.

Black-Oxide Carbon Steel—Rod end bolts with a black-oxide finish have a dark, matte coating that keeps the steel from rusting in dry environments.

DIN 444—Rod end bolts that meet DIN 444 adhere to international dimensional standards, ensuring they are compatible with other parts and tools.

	Shank
	Thread Size	Ctr. Lg., mm	Thread Lg., mm	ID, mm	Overall Wd., mm	Shank Threading	Overall Thk., mm	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Right-Hand Shank Thread







				Black-Oxide Carbon Steel

				M5 × 0.8 mm	50	16	5	12	Partially Threaded	6	75,000	DIN 444	1	3799K701	000000


				M5 × 0.8 mm	75	16	5	12	Partially Threaded	6	75,000	DIN 444	1	3799K702	00000
				M6 × 1 mm	50	18	6	14	Partially Threaded	7	75,000	DIN 444	1	3799K703	00000
				M6 × 1 mm	50	32	6	14	Partially Threaded	7	75,000	DIN 444	1	3799K11	00000
				M6 × 1 mm	75	18	6	14	Partially Threaded	7	75,000	DIN 444	1	3799K704	00000
				M8 × 1.25 mm	50	22	8	18	Partially Threaded	9	75,000	DIN 444	1	3799K705	00000
				M8 × 1.25 mm	50	32	8	18	Partially Threaded	9	75,000	DIN 444	1	3799K13	00000
				M8 × 1.25 mm	75	22	8	18	Partially Threaded	9	75,000	DIN 444	1	3799K706	00000
				M8 × 1.25 mm	75	32	8	18	Partially Threaded	9	75,000	DIN 444	1	3799K14	00000
				M10 × 1.5 mm	75	26	10	20	Partially Threaded	12	75,000	DIN 444	1	3799K707	00000
				M10 × 1.5 mm	75	40	10	20	Partially Threaded	12	75,000	DIN 444	1	3799K15	00000


				M10 × 1.5 mm	100	26	10	20	Partially Threaded	12	75,000	DIN 444	1	3799K708	00000
				M10 × 1.5 mm	100	40	10	20	Partially Threaded	12	75,000	DIN 444	1	3799K16	00000
				M12 × 1.75 mm	75	30	12	25	Partially Threaded	14	75,000	DIN 444	1	3799K709	00000
				M12 × 1.75 mm	100	30	12	25	Partially Threaded	14	75,000	DIN 444	1	3799K71	00000
				M12 × 1.75 mm	100	40	12	25	Partially Threaded	14	75,000	DIN 444	1	3799K17	00000
				M12 × 1.75 mm	120	30	12	25	Partially Threaded	14	75,000	DIN 444	1	3799K711	00000
				M12 × 1.75 mm	130	30	12	25	Partially Threaded	14	75,000	DIN 444	1	3799K712	00000
				M12 × 1.75 mm	130	40	12	25	Partially Threaded	14	75,000	DIN 444	1	3799K18	00000
				M14 × 2 mm	75	36	14	28	Partially Threaded	16	75,000	DIN 444	1	3799K713	00000
				M14 × 2 mm	130	36	14	28	Partially Threaded	16	75,000	DIN 444	1	3799K714	00000


				M16 × 2 mm	100	50	16	32	Partially Threaded	17	75,000	DIN 444	1	3799K19	00000
				M16 × 2 mm	130	44	16	32	Partially Threaded	17	75,000	DIN 444	1	3799K715	00000
				M16 × 2 mm	130	50	16	32	Partially Threaded	17	75,000	DIN 444	1	3799K21	00000
				M20 × 2.5 mm	140	52	18	40	Partially Threaded	22	75,000	DIN 444	1	3799K716	00000




						Carbon Steel

						M6 × 1 mm	25	11	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K801	00000


						M6 × 1 mm	30	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K802	00000
						M6 × 1 mm	35	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K803	0000
						M6 × 1 mm	40	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K804	0000
						M6 × 1 mm	45	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K805	00000
						M6 × 1 mm	50	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K806	00000
						M6 × 1 mm	60	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K807	00000
						M6 × 1 mm	70	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K808	00000
						M6 × 1 mm	80	18	6	14	Partially Threaded	7	55,000	DIN 444	5	6066K809	00000
						M8 × 1.25 mm	25	9	8	18	Partially Threaded	9	55,000	DIN 444	5	6066K81	00000
						M8 × 1.25 mm	30	20	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K811	0000


						M8 × 1.25 mm	35	22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K812	0000
						M8 × 1.25 mm	40	22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K813	0000
						M8 × 1.25 mm	45	22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K814	0000
M8 × 1.25 mm						50	22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K815	0000
M8 × 1.25 mm	60					22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K816	0000
M8 × 1.25 mm	70					22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K817	0000
M8 × 1.25 mm	80					22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K818	0000
M8 × 1.25 mm	90					22	8	18	Partially Threaded	9	55,000	DIN 444	1	6066K819	0000
M8 × 1.25 mm	100	22				8	18	Partially Threaded	9	55,000	DIN 444	1	6066K82	0000
M8 × 1.25 mm	110	22	8			18	Partially Threaded	9	55,000	DIN 444	1	6066K821	0000


M8 × 1.25 mm	120	22	8			18	Partially Threaded	9	55,000	DIN 444	1	6066K822	0000
M8 × 1.25 mm	130	28	8			18	Partially Threaded	9	55,000	DIN 444	1	6066K823	0000
M8 × 1.25 mm	140	28	8			18	Partially Threaded	9	55,000	DIN 444	1	6066K824	0000
M10 × 1.5 mm	30	12	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K825	0000
M10 × 1.5 mm	35	17	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K826	0000
M10 × 1.5 mm	40	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K827	0000
M10 × 1.5 mm	45	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K828	0000
M10 × 1.5 mm	50	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K829	0000
M10 × 1.5 mm	60	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K83	0000
M10 × 1.5 mm	70	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K831	0000


M10 × 1.5 mm	80	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K832	0000
M10 × 1.5 mm	90	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K833	0000
M10 × 1.5 mm	100	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K834	00000
M10 × 1.5 mm	110	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K835	00000
M10 × 1.5 mm	120	26	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K836	00000
M10 × 1.5 mm	130	32	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K837	00000
M10 × 1.5 mm	140	32	10			20	Partially Threaded	12	55,000	DIN 444	1	6066K838	00000
M12 × 1.75 mm	45	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K841	0000
M12 × 1.75 mm	50	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K842	0000
M12 × 1.75 mm	60	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K843	0000


M12 × 1.75 mm	70	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K844	0000
M12 × 1.75 mm	80	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K845	0000
M12 × 1.75 mm	90	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K846	0000
M12 × 1.75 mm	100	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K847	0000
M12 × 1.75 mm	110	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K848	0000
M12 × 1.75 mm	120	30	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K849	0000
M12 × 1.75 mm	130	36	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K85	00000
M12 × 1.75 mm	140	36	12			25	Partially Threaded	14	55,000	DIN 444	1	6066K851	00000
M16 × 2 mm	40	13	16			32	Partially Threaded	17	55,000	DIN 444	1	6066K852	0000
M16 × 2 mm	50	23	16	32		Partially Threaded	17	55,000	DIN 444	1	6066K853	0000
M16 × 2 mm	60	38	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K854	00000
M16 × 2 mm	70	38	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K855	0000
M16 × 2 mm	80	38	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K856	00000
M16 × 2 mm	90	38	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K857	00000
M16 × 2 mm	100	38	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K858	00000
M16 × 2 mm	110	38	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K859	00000
M16 × 2 mm	120	38	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K86	00000
M16 × 2 mm	130	44	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K861	00000
M16 × 2 mm	140	44	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K862	00000
M16 × 2 mm	150	44	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K863	00000
M16 × 2 mm	160	44	16	32	Partially Threaded	17	55,000	DIN 444	1	6066K864	00000
M20 × 2.5 mm	80	46	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K865	00000
M20 × 2.5 mm	90	46	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K866	00000
M20 × 2.5 mm	100	46	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K867	00000
M20 × 2.5 mm	110	46	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K868	00000
M20 × 2.5 mm	120	46	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K869	00000
M20 × 2.5 mm	130	52	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K87	00000
M20 × 2.5 mm	140	52	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K871	00000
M20 × 2.5 mm	150	52	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K872	00000
M20 × 2.5 mm	160	52	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K873	00000
M20 × 2.5 mm	180	52	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K874	00000
M20 × 2.5 mm	200	52	18	40	Partially Threaded	22	55,000	DIN 444	1	6066K875	00000

Corrosion-Resistant Partially Threaded Rod End Bolts

Pivot and hinge components in wet and corrosive environments with these stainless steel or brass rod end bolts. They're commonly known as swing bolts and eyebolts. With no moving parts, they're less likely to wear out than ball joint rod ends, although they don't compensate for misalignment as effectively. Use them to guide and connect components, such as tubing, or as a turnbuckle to tension wire and cable. They can also be used as tie downs and hinges.

With external threads, these bolts hold fast to female threaded components in applications where high shear strength is required, such as water pumps, alternators, and motor mounts. Because the shank is only partially threaded, they handle a greater amount of force from the side than bolts with a fully threaded shank.

Brass—Brass rod end bolts resist corrosion in humid and wet environments, but not as well as stainless steel bolts. They're also not as strong. Often, brass bolts are chosen for their look, or to match other components, such as hinges.

DIN 444—DIN 444 rod end bolts meet an international standard for rod end dimensions.

	Shank
	Thread Size	Ctr. Lg., mm	Thread Lg., mm	ID, mm	Overall Wd., mm	Shank Threading	Overall Thk., mm	Tensile Strength, psi	Specs. Met		Each
Right-Hand Shank Thread







				Brass

				M6 × 1 mm	40	18	6	14	Partially Threaded	7	50,000	DIN 444	3544N101	00000


				M6 × 1 mm	50	18	6	14	Partially Threaded	7	50,000	DIN 444	3544N102	0000
				M6 × 1 mm	60	18	6	14	Partially Threaded	7	50,000	DIN 444	3544N103	0000
				M8 × 1.25 mm	40	22	8	18	Partially Threaded	9	50,000	DIN 444	3544N104	0000
				M8 × 1.25 mm	50	22	8	18	Partially Threaded	9	50,000	DIN 444	3544N105	0000
				M8 × 1.25 mm	60	22	8	18	Partially Threaded	9	50,000	DIN 444	3544N106	00000
				M8 × 1.25 mm	70	22	8	18	Partially Threaded	9	50,000	DIN 444	3544N107	00000
				M8 × 1.25 mm	80	22	8	18	Partially Threaded	9	50,000	DIN 444	3544N108	00000
				M10 × 1.5 mm	50	26	10	20	Partially Threaded	12	50,000	DIN 444	3544N109	00000
				M10 × 1.5 mm	60	26	10	20	Partially Threaded	12	50,000	DIN 444	3544N11	00000
				M10 × 1.5 mm	70	26	10	20	Partially Threaded	12	50,000	DIN 444	3544N111	00000


				M10 × 1.5 mm	80	26	10	20	Partially Threaded	12	50,000	DIN 444	3544N112	00000
				M10 × 1.5 mm	90	26	10	20	Partially Threaded	12	50,000	DIN 444	3544N113	00000
				M10 × 1.5 mm	100	26	10	20	Partially Threaded	12	50,000	DIN 444	3544N114	00000
				M12 × 1.75 mm	60	30	12	25	Partially Threaded	14	50,000	DIN 444	3544N115	00000
				M12 × 1.75 mm	70	30	12	25	Partially Threaded	14	50,000	DIN 444	3544N116	00000
				M12 × 1.75 mm	80	30	12	25	Partially Threaded	14	50,000	DIN 444	3544N117	00000
				M12 × 1.75 mm	90	30	12	25	Partially Threaded	14	50,000	DIN 444	3544N118	00000
				M12 × 1.75 mm	100	30	12	25	Partially Threaded	14	50,000	DIN 444	3544N119	00000
				M16 × 2 mm	70	38	16	32	Partially Threaded	17	50,000	DIN 444	3544N12	00000
				M16 × 2 mm	80	38	16	32	Partially Threaded	17	50,000	DIN 444	3544N121	00000


				M16 × 2 mm	90	38	16	32	Partially Threaded	17	50,000	DIN 444	3544N122	00000
				M16 × 2 mm	100	38	16	32	Partially Threaded	17	50,000	DIN 444	3544N123	00000
				M16 × 2 mm	110	38	16	32	Partially Threaded	17	50,000	DIN 444	3544N124	00000
				M16 × 2 mm	130	44	16	32	Partially Threaded	17	50,000	DIN 444	3544N126	00000
				M16 × 2 mm	140	44	16	32	Partially Threaded	17	50,000	DIN 444	3544N127	00000
				M20 × 2.5 mm	80	46	18	40	Partially Threaded	22	50,000	DIN 444	3544N128	00000
				M20 × 2.5 mm	90	46	18	40	Partially Threaded	22	50,000	DIN 444	3544N129	00000
				M20 × 2.5 mm	100	46	18	40	Partially Threaded	22	50,000	DIN 444	3544N13	00000
				M20 × 2.5 mm	110	46	18	40	Partially Threaded	22	50,000	DIN 444	3544N131	00000
				M20 × 2.5 mm	120	46	18	40	Partially Threaded	22	50,000	DIN 444	3544N132	00000


				M20 × 2.5 mm	130	52	18	40	Partially Threaded	22	50,000	DIN 444	3544N133	00000
				M20 × 2.5 mm	140	52	18	40	Partially Threaded	22	50,000	DIN 444	3544N134	00000




						303 Stainless Steel

						M6 × 1 mm	50	32	6	14	Partially Threaded	7	85,000	DIN 444	3799K41	00000


						M8 × 1.25 mm	50	32	8	18	Partially Threaded	9	85,000	DIN 444	3799K43	00000
						M8 × 1.25 mm	75	32	8	18	Partially Threaded	9	85,000	DIN 444	3799K44	00000
						M10 × 1.5 mm	75	40	10	20	Partially Threaded	12	85,000	DIN 444	3799K45	00000
						M10 × 1.5 mm	100	40	10	20	Partially Threaded	12	85,000	DIN 444	3799K46	00000
						M12 × 1.75 mm	100	40	12	25	Partially Threaded	14	85,000	DIN 444	3799K47	00000
M12 × 1.75 mm						130	40	12	25	Partially Threaded	14	85,000	DIN 444	3799K48	00000
M16 × 2 mm	100					50	16	32	Partially Threaded	17	85,000	DIN 444	3799K49	00000
M16 × 2 mm	130					50	16	32	Partially Threaded	17	85,000	DIN 444	3799K51	00000




		304 Stainless Steel

		M6 × 1 mm	30			18	6	14	Partially Threaded	7	85,000	DIN 444	3799K601	0000


		M6 × 1 mm	35			18	6	14	Partially Threaded	7	85,000	DIN 444	3799K602	0000
		M6 × 1 mm	40			18	6	14	Partially Threaded	7	85,000	DIN 444	3799K603	0000
		M6 × 1 mm	45			18	6	14	Partially Threaded	7	85,000	DIN 444	3799K604	0000
		M6 × 1 mm	50			18	6	14	Partially Threaded	7	85,000	DIN 444	3799K605	0000
		M6 × 1 mm	60			18	6	14	Partially Threaded	7	85,000	DIN 444	3799K606	0000
		M8 × 1.25 mm	30			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K607	0000
		M8 × 1.25 mm	35			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K608	0000
		M8 × 1.25 mm	40			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K609	00000
		M8 × 1.25 mm	45			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K61	00000
		M8 × 1.25 mm	50			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K611	00000


		M8 × 1.25 mm	60			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K612	00000
		M8 × 1.25 mm	70			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K613	00000
		M8 × 1.25 mm	80			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K614	00000
		M8 × 1.25 mm	90			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K615	00000
		M8 × 1.25 mm	100			22	8	18	Partially Threaded	9	85,000	DIN 444	3799K616	00000
		M10 × 1.5 mm	40			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K617	00000
		M10 × 1.5 mm	45			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K618	00000
		M10 × 1.5 mm	50			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K619	00000
		M10 × 1.5 mm	60			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K62	00000
		M10 × 1.5 mm	70			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K621	00000


		M10 × 1.5 mm	80			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K622	00000
		M10 × 1.5 mm	90			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K623	00000
		M10 × 1.5 mm	100			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K624	00000
		M10 × 1.5 mm	110			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K625	00000
		M10 × 1.5 mm	120			26	10	20	Partially Threaded	12	85,000	DIN 444	3799K626	00000
		M12 × 1.75 mm	50			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K627	00000
		M12 × 1.75 mm	60			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K628	00000
		M12 × 1.75 mm	70			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K629	00000
		M12 × 1.75 mm	80			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K63	00000
		M12 × 1.75 mm	90			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K631	00000


		M12 × 1.75 mm	100			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K632	00000
		M12 × 1.75 mm	110			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K633	00000
		M12 × 1.75 mm	120			30	12	25	Partially Threaded	14	85,000	DIN 444	3799K634	00000
		M16 × 2 mm	60			38	16	32	Partially Threaded	17	85,000	DIN 444	3799K635	00000
		M16 × 2 mm	70			38	16	32	Partially Threaded	17	85,000	DIN 444	3799K636	00000
		M16 × 2 mm	80	38		16	32	Partially Threaded	17	85,000	DIN 444	3799K637	00000
		M16 × 2 mm	90	38	16	32	Partially Threaded	17	85,000	DIN 444	3799K638	00000
		M16 × 2 mm	100	38	16	32	Partially Threaded	17	85,000	DIN 444	3799K639	00000
		M16 × 2 mm	110	38	16	32	Partially Threaded	17	85,000	DIN 444	3799K64	00000
		M16 × 2 mm	120	38	16	32	Partially Threaded	17	85,000	DIN 444	3799K641	00000


		M16 × 2 mm	130	44	16	32	Partially Threaded	17	85,000	DIN 444	3799K642	00000
		M16 × 2 mm	140	44	16	32	Partially Threaded	17	85,000	DIN 444	3799K643	00000
		M20 × 2.5 mm	70	46	18	40	Partially Threaded	22	85,000	DIN 444	3799K644	00000
		M20 × 2.5 mm	80	46	18	40	Partially Threaded	22	85,000	DIN 444	3799K645	00000
		M20 × 2.5 mm	90	46	18	40	Partially Threaded	22	85,000	DIN 444	3799K646	00000
		M20 × 2.5 mm	100	46	18	40	Partially Threaded	22	85,000	DIN 444	3799K647	00000
		M20 × 2.5 mm	120	46	18	40	Partially Threaded	22	85,000	DIN 444	3799K648	00000
		M20 × 2.5 mm	140	52	18	40	Partially Threaded	22	85,000	DIN 444	3799K649	00000
		M20 × 2.5 mm	160	52	18	40	Partially Threaded	22	85,000	DIN 444	3799K65	00000