About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
Selecting Compatible Lead Screws and Nuts
More
About Shafts
More
About Tool Steel
More
High-Strength Easy-to-Machine 1144 Carbon Steel Rods
- Yield Strength: 100,000 psi
- Hardness:
Inch sizes: Rockwell C25 (Hard)
Metric sizes: Rockwell C19 (Medium) - Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Not Rated
- Fabrication: Cold Drawn
- Specifications Met: ASTM A108, ASTM A311
Made with more carbon and manganese than other easy-to-machine carbon steels, 1144 carbon steel has a higher yield strength and hardness. Also known as Stressproof, these rods are stress-relieved to minimize warping during machining. Use them to fabricate parts that require stress resistance, such as gears, shafts, and bushings. For added wear resistance, these rods can be surface hardened with heat treating. All meet ASTM A108 and ASTM A311 standards for quality and performance.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Tight-Tolerance Multipurpose Air-Hardening A2 Tool Steel Rods
Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe. They’re also known as drill rod. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: See Table
- Hardness: See Table
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: See Table
- Specifications Met: ASTM A681
Tight-Tolerance Multipurpose Oil-Hardening O1 Tool Steel Rods
- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment:
Inch sizes: Rockwell C65
Metric sizes: Rockwell C62 - Specifications Met: ASTM A681
Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance. They’re also known as drill rod. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Tight-Tolerance Easy-to-Machine W1 Tool Steel Rods
- Yield Strength: 50,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C65
- Specifications Met: ASTM A686
These rods, also called drill rod, are ground and held to strict diameter and straightness tolerances. They are ready to be turned in a lathe. With lower amounts of alloy elements than other tool steels, W1 offers excellent machinability. This water-hardening material is often used for hammers, files, taps, and reamers. These rods are decarb-free for a uniform surface that will consistently accept heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
304/304L stainless steel contains less carbon than standard 304 for better weldability.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 30,000 psi
- Hardness: Rockwell B75 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A276
Easy-to-Machine 303 Stainless Steel
Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 25,000 psi
- Hardness:
Inch Sizes: Rockwell B77 (Medium)
Metric Sizes: Rockwell B85 (Medium) - Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A582
Metric Sizes: EN 10088-3
Tight-Tolerance Easy-to-Machine 303 Stainless Steel
This material has tighter tolerances than standard 303 stainless steel. Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.
Rods are precision ground and held to a strict straightness tolerance, so they are ready for turning in a lathe.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: See Table
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A582, SAE AMS5640
Corrosion-Resistant 316 Stainless Steel
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.
316/316L stainless steel contains less carbon than standard 316 for better weldability.
If you don’t see the rod size you’re looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength:
Inch Sizes: 30,000 psi
Metric Sizes: 29,000 psi - Hardness:
Inch Sizes: Rockwell B75 (Medium)
Metric Sizes: Rockwell B80 (Medium) - Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A276
- Yield Strength: 30,000 psi
- Hardness: Rockwell B75 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A276
To Order: Please specify length in increments of 0.125" within the range listed.
| Dia. | Dia. Tolerance | Fabrication | Max. Temp., °F | Straightness Tolerance | Choose a Length | Per Inch | |
316/316L Stainless Steel  | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/16" | -0.003" to 0.003" | Cold Worked | 1500° | 1/8" per 5 ft. | 13"-90" | 000000000 | 00000 |
High-Strength 17-4 PH Stainless Steel
With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel. This material maintains its corrosion resistance in temperatures up to 1100° F.
If you don't see the rod size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness: Rockwell C30 (Hard)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C45
- Specifications Met: ASTM A564, SAE AMS5643
- Yield Strength: Not Rated
- Hardness: Rockwell C30 (Hard)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C45
- Specifications Met: ASTM A564, SAE AMS5643
To Order: Please specify length in increments of 0.125" within the range listed.
| Dia. | Dia. Tolerance | Fabrication | Straightness Tolerance | Magnetic Properties | Choose a Length | Per Inch | |
| 1 1/16" | -0.003" to 0.003" | Cold Drawn | 1/16" per 5 ft. | Magnetic | 13"-90" | 000000000 | 00000 |
Easy-to-Machine 416 Stainless Steel
One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts. This material maintains its corrosion resistance in temperatures up to 1200° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 40,000 psi
- Hardness: Rockwell B80 (Medium)
- Heat Treatment: Annealed
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C35
- Specifications Met: ASTM A582, SAE AMS5610, ASTM A484
Bearing-Quality 440C Stainless Steel
One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It’s often used for bearings, valves, and knife blades. This material maintains its corrosion resistance in temperatures up to 800° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 65,000 psi
- Hardness: Rockwell C20 (Hard)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
- Specifications Met: ASTM A276, SAE AMS5630
Ultra-Machinable 360 Brass Rods and Discs
- Yield Strength:
Inch sizes: 15,000 psi
Metric sizes: 23,000 psi - Hardness: See table
- Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B16
Metric sizes: European Standard EN 12164
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Ball Screws and Nuts
Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start ball screws and nuts, they have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts. To ensure compatibility, select components that have the same thread direction and size. Ball nuts are furnished with a tube to keep ball bearings in place. Do not remove the tube until you are ready to install the nuts onto the screws.
Black-oxide alloy steel ball screws and nuts have mild corrosion resistance.
Travel distance per turn, also known as screw lead, is the distance a ball nut moves with one revolution of the ball screw.
For technical drawings and 3-D models, click on a part number.
Secure a way wiper on the end of a ball nut to sweep chips and other contaminants out of the way as it moves across the ball screw.
Flange | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Dia. | Thick. | No. of Thread Starts | Travel Distance per Turn | Bolt Circle Dia. | Hardness | Dynamic Thrust Load Cap., lbs. | Max. Backlash | Each | ||
Black-Oxide Alloy Steel | |||||||||||||
| D | 1/2"-5 | 2 57/64" | 1 1/16" | 2 19/32" | 17/32" | 1 | 0.2" | 2 3/32" | Rockwell C56 | 1,200 | 0.015" | 00000000 | 0000000 |
Fast-Travel Corrosion-Resistant Ball Screws and Nuts
Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start. Suitable for use in harsh environments, these ball screws and nuts are made of stainless steel. Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. To ensure compatibility, select components that have the same thread size. Ball nuts are furnished with a tube to keep ball bearings in place. Do not remove the tube until you are ready to install the nuts onto the screws.
Travel distance per turn, also known as screw lead, is the distance a ball nut moves with one revolution of the ball screw.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Lg. | Dia. | No. of Thread Starts | Travel Distance per Turn | External Thread Size | Hardness | Dynamic Thrust Load Cap., lbs. | Max. Backlash | Temperature Range, °F | Each | |
17-4 PH Stainless Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2"-4 | 1 3/4" | 1 1/16" | 2 | 0.5" | 15/16"-16 | Rockwell C38 | 140 | 0.007" | -65° to 300° | 0000000 | 0000000 |
Flange | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Dia. | Thick. | No. of Thread Starts | Travel Distance per Turn | Bolt Circle Dia. | Hardness | Dynamic Thrust Load Cap., lbs. | Max. Backlash | Temperature Range, °F | Each | |
17-4 PH Stainless Steel | |||||||||||||
| 1/2"-4 | 1 29/32" | 1 1/16" | 2 19/32" | 17/32" | 2 | 0.5" | 2 3/32" | Rockwell C38 | 140 | 0.007" | -65° to 300° | 0000000 | 0000000 |
Keyed Rotary Shafts
Combine these shafts with a machine key (not included) to transmit torque to gears, sprockets, and other power transmission components. All have an ANSI standard keyway (keys not included; see our selection of key stock). Their edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, or polished to tight diameter and straightness tolerances.
Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. 1045 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Lg. | Wd. | Dp. | ANSI Keys Included | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Each | |
Inch—1045 Carbon Steel | ||||||||||
1 1/16" Dia. (Tolerance: -0.0025" to 0") | ||||||||||
| 12" | 12" | 0.25" | 1/8" | No | 0.013" per ft. | Chamfered | Medium | Rockwell B95 | 00000000 | 000000 |
| 24" | 24" | 0.25" | 1/8" | No | 0.013" per ft. | Chamfered | Medium | Rockwell B95 | 00000000 | 00000 |
| 36" | 36" | 0.25" | 1/8" | No | 0.013" per ft. | Chamfered | Medium | Rockwell B95 | 00000000 | 00000 |
| 72" | 72" | 0.25" | 1/8" | No | 0.013" per ft. | Chamfered | Medium | Rockwell B95 | 00000000 | 00000 |