14mm Rods | McMaster-Carr

The most widely used aluminum, 6061 is made into everything from pipe fittings to containers to airplane parts. It balances strength and corrosion resistance, plus it's easy to machine and weld.

Don't see the size you need? Check out our Made-to-Order 6061 Aluminum Rods.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

Image of Product. Front orientation. Aluminum. Multipurpose 6061 Aluminum Rods.

Dia. Tolerance, mm	Fabrication	Temper Designation	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long



14	-0.230 to 0.230	Extruded	T6	ASTM B221	4634T38	00000	000000	000000

Tight-Tolerance Ultra-Machinable 12L14 Carbon Steel Rods

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance. The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts, such as shaft couplings, studs, and pins. For added wear resistance, they can be surface hardened with heat treating.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Yield Strength, psi	Mechanical Finish	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long	8 ft. Long
14	-0.012 to 0	Cold Worked	65,000	Precision Ground	Rockwell B80 (Medium)	Rockwell C65	ASTM A108	5544T352	000000	000000	000000	000000	000000

Tight-Tolerance Air-Hardening A2 Tool Steel Rods

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe. Also known as drill rod, this A2 tool steel is more wear resistant than O1 and keeps a sharper cutting edge. It’s air-hardening, so it doesn’t require baths or quenching after heat treatment. This tool steel is often used for punches, blades, and hammers.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Heat Treatment	Hardness	Max. Hardness After Heat Treatment	Mechanical Finish	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
14	-0.0250 to 0.0250	Hot Rolled	Annealed	Rockwell B101 (Hard)	Rockwell C62	Precision Ground	ASTM A681	8116K44	000000	000000	0000000

Multipurpose Low-Carbon Steel Rods

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into low-strength fasteners, pins, and axles. You can surface harden this material for added wear resistance.

If you don't see the size you're looking for, check out our Made-to-Order Low-Carbon Steel Rods.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

Cold Worked—Cold-worked products have a finished look and quality. The cold-working process gives the steel consistent strength, hardness, and dimensions throughout.

Dia., mm	Dia. Tolerance, mm	Fabrication	Yield Strength, psi	Mechanical Finish	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
14	-0.01 to 0	Cold Worked	50,000	Ground, Polished, Turned	Rockwell B70 (Medium)	Not Rated	ASTM A108	8920K5	000000	000000	0000000

Extra-Hard C2 Tungsten Carbide

Machine long-lasting tools, such as end mills and inserts, with this Tungsten. Tungsten carbide, sometimes called carbide, is harder than our Corrosion-Resistant Tungsten with excellent wear resistance. Its extreme hardness lets cutting edges stay sharp far longer than high-speed steel.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Rods with Coolant Hole

Rods with a coolant hole let coolant flow into tools that need it, saving you the effort of drilling a hole yourself.

Dia. Tolerance, mm	ID, mm	ID Tolerance, mm	Lg., mm	Lg. Tolerance, mm	Mechanical Finish	Yield Strength	Hardness	Temper Rating		Each



14	-0.006 to 0	2	-0.25 to 0.25	84	0 to 0.84	Precision Ground	Not Rated	Rockwell C80 (Extra Hard)	Not Rated	4702N121	0000000

Tight-Tolerance Extreme-Strength 17-4 PH Stainless Steel Rods

Machine high-strength parts that require pinpoint precision. Ready to turn in your lathe, these rods come precision ground to tight tolerances. 17-4 PH stainless steel combines the strength of 400 series stainless steel with 300 series corrosion resistance. Ideal for the most demanding applications, these rods are often used to create fasteners, pipe fittings, and other cylindrical parts. They maintain their corrosion resistance in temperatures as hot as 1100° F. Also known as 630 stainless steel.

Heat Treatment Condition A—The most machinable and formable state of 17-4 PH stainless steel. These rods are a good option when you’re performing your own heat treatment. They can be heat treated to boost their yield strength up to 170,000 psi.

Heat Treatment Condition H900—Heat treated for maximum strength, hardness, and wear resistance. However, these rods aren't as tough as rods that have been heat treated to other conditions. They’re also more prone to stress corrosion cracking.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Dia. Tolerance, mm	Max. Temp., ° F	Fabrication	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1/2 ft. Long	1 ft. Long	2 ft. Long	3 ft. Long	4 ft. Long	6 ft. Long
Heat Treatment Condition A



	14	-0.013 to 0	1,100	Cold Worked	Rockwell C28 (Hard)	Rockwell C47	ASTM A564, SAE AMS5643	3180T18	000000	000000	000000	000000	0000000	0000000


	Heat Treatment Condition H900



			14	-0.013 to 0	1,100	Cold Drawn, Hot Rolled	Rockwell C40 (Hard)	—	ASTM A564, SAE AMS5643	1141T51	00000	00000	000000	000000	—	000000

Tight-Tolerance Multipurpose 4140 Alloy Steel Rods

Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance. Also known as chrome-moly steel, this versatile alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress. For added wear resistance, you can surface harden these rods with heat treating.

Note: Rods may be made from either 4140 or 4142 alloy steel. They are interchangeable in most applications.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Heat Treatment	Yield Strength, psi	Mechanical Finish	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long	12 ft. Long
14	-0.013 to 0	Cold Drawn	Annealed	60,000	Precision Ground	Rockwell B90 (Medium)	Rockwell C60	ASTM A108	5836T255	000000	000000	000000	0000000	0000000

Rotary Shafts

Pair with gears, sprockets, and bearings to transmit rotary motion. Turned, ground, and polished to tight tolerances, these shafts reduce vibration, evenly distribute loads, and improve accuracy.

Carbon Steel—Strong and easy to machine. These shafts work best in dry environments since moisture will cause steel to rust.

				Material
	Lg., mm	Straightness Tolerance	Diameter Tolerance	Hardness	Hardness Rating		Each
Carbon Steel







				14 mm Diameter

				200	0.3 mm/300 mm	-0.051 mm to 0 mm	Brinell 197	Medium	4138N51	000000


				400	0.3 mm/300 mm	-0.051 mm to 0 mm	Brinell 197	Medium	4138N52	00000
				1,000	0.3 mm/300 mm	-0.051 mm to 0 mm	Brinell 197	Medium	4138N53	00000
				2,000	0.3 mm/300 mm	-0.051 mm to 0 mm	Brinell 197	Medium	4138N54	00000

Highly Corrosion-Resistant 316 Stainless Steel Rods

One of the most corrosion-resistant types of stainless steel, 316 stands up to the harshest chemicals, including bleach, chlorine, and phosphoric acid. It's a step up from 304, which has similar strength and temperature performance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

Image of Product. Front orientation. Stainless Steel. Highly Corrosion-Resistant 316 Stainless Steel Rods.

Dia. Tolerance, mm	Material	Fabrication	Hardness		1 ft. Long	1 1/2 ft. Long	3 ft. Long



14	-0.043 to 0	316 Stainless Steel	Cold Drawn	Rockwell B80 (Medium)	1335T34	000000	0000000	0000000

Machinable 303 Stainless Steel Rods

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

Image of Product. Front orientation. Stainless Steel. Machinable 303 Stainless Steel Rods.

Dia., mm	Dia. Tolerance, mm	Fabrication	Hardness	Specs. Met		1 ft. Long	1 1/2 ft. Long	3 ft. Long
14	-0.043 to 0	Cold Drawn	Rockwell B85 (Medium)	EN 10088-3	1274T54	000000	000000	000000

Tight-Tolerance Low-Carbon Steel Rods

These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in a lathe. Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into low-strength fasteners, pins, and axles. For added wear resistance, this material can be surface hardened with heat treating.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Yield Strength	Hardness	Mechanical Finish	Specs. Met		3 ft. Long	6 ft. Long
14	-0.013 to 0	Cold Drawn	Not Rated	Not Rated	Precision Ground	ASTM A108	6103N605	000000	000000

Multipurpose Flame-Retardant Garolite G-10/FR4 Rods

Made of a flame-retardant epoxy resin with fiberglass fabric reinforcement, these G-10/FR4 rods are a good all-around choice. They are strong, machinable, and electrically insulating. Garolite G-10/FR4 is also called epoxy-grade industrial laminate and phenolic.

If you don’t see the size you’re looking for, please specify a length under additional rod lengths.

Extreme Strength, Flame Retardant, High Strength, High Temperature, Highly Absorbent, Highly Electrical Insulating, Moisture Resistant, Ultra Impact Resistant Rod

Image of Product. Front orientation. Garolite. Multipurpose Flame-Retardant Garolite G-10/FR4 Rods.

	Dia. Tolerance, mm	Temp. Range, ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Hardness	For Use Outdoors	Mil. Spec.	Flammability Rating		1 ft. Long	4 ft. Long
Green



	14	-0.026 to 0.026	-100 to 245	35,000 to 50,000	5.5 to 12	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	8669K639	000000	000000

Ultra-Machinable 360 Brass Rods

With the highest lead content, 360 is the easiest brass alloy to machine. Known as free-machining and free-cutting brass, it handles high-speed drilling, milling, and tapping with minimal wear on your tools. You’ll often see it made into gears, pinions, and lock components.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Long Rods

				1 m Long
Dia., mm	Dia. Tolerance, mm	Temper Designation	Specs. Met		Each
14	-0.08 to 0.08	Not Rated	EN 12164	1452N22	000000

Highly Machinable 4140 Alloy Steel Rods

Often called ETD-150, this modified alloy steel is drawn at high temperatures for excellent strength and machinability. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress. It is used for a wide range of parts, such as gears, axles, and shafts. These rods have been hardened for added resistance to abrasion and impact.

Note: Rods may be made from either 4140 or 4142 alloy steel. They are interchangeable in most applications.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Heat Treatment	Yield Strength, psi	Hardness	Specs. Met		1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long
14	-0.025 to 0	Cold Worked	Hardened	130,000	Rockwell C32 (Hard)	ASTM A108	6818T42	000000	000000	000000	000000

Tight-Tolerance Hardened Machinable 416 Stainless Steel Rods

The best balance of superior wear resistance, precision, and machinability. These 416 stainless steel rods come hardened to increase strength and resist denting and deforming. Precision ground to tight tolerances, they're all set to turn in your lathe.

416 is the easiest type of stainless steel to machine. Alloyed with sulfur, it cuts quickly without clogging your cutting tools. It won't wear down when it grinds against other metal parts, so it's a good choice for gears, screws, and shafts. It also maintains its corrosion resistance in temperatures as hot as 1200° F. However, it's not as corrosion resistant as other types of stainless steel, such as 304 and 17-4 PH.

Premium—Extra sulfur means you can machine faster, create smoother finishes, and control chips better than with standard 416 stainless steel. Also called Project 70+.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Dia. Tolerance, mm	Fabrication	Hardness	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
Premium



	14	-0.0127 to 0	Cold Worked	Rockwell C30 (Hard)	ASTM A582	3821T107	000000	000000	0000000

Rod End Nuts

Attach these nuts to rods, pipes, and tubes to make pivoting and hinge movements where misalignment is not a concern. They’re often used to control air- and hydraulic-powered arms as well as other components in power transmission systems. Made of zinc-plated steel, these nuts resist being dislodged. They’re heavy, however, and may corrode over time as the plating wears down.

Round Shank

	ID, mm	Overall Dia., mm	Shank Ctr. Lg., mm	Shank Thread Lg., mm	Tensile Strength	Material		Each
Right-Hand Shank Thread



	M8 × 1.25 mm	8.1	14	19	11	Not Rated	Zinc-Plated Steel	5621N14	00000

Ultra-High-Temperature Quartz Glass Rods and Discs

Able to withstand temperatures up to 2100° F, this quartz glass is useful in high-temperature applications that also require optical clarity, such as high-intensity lighting, fiber-optic production, and optical lens systems. It provides excellent UV transmission, as well as high transmission in the visible and infrared ranges.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Rods

					Temp.			12" Long
	Dia., mm	Dia. Tolerance, mm	Edge Fabrication	Lg. Tolerance	Min.	Max., ° F	Color		Each
Annealed



		14	-0.380 to 0.380	Ground	-0.125" to 0.125"	Not Rated	2,100	Clear	1357T167	000000

Dowel Pins

Precisely align machine parts and prevent movement during assembly. These dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. They can also be used as a pivot, shaft, or hinge to join moving components. Since dowel pins can be hard to remove, they are best suited for permanent fixtures that don't require frequent adjustments or disassembly.

Steel

High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.

Material Certificate—Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.

	Min. Hardness	Specs. Met	Certificate Type	Pkg. Qty.		Pkg.
High-Strength Alloy Steel







	14 mm Diameter

	24	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A684	00000


	28	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A685	0000
	30	0.007 to 0.018	30,500 lbf	Rockwell C52	DIN 6325-m6, ISO 8734	—	1	91595A901	0000
	32	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A694	0000
	40	0.007 to 0.018	Not Rated	Rockwell C52	DIN 6325-m6, ISO 8734	Material Certificate	1	91595A905	0000
	45	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A698	0000
	50	0.007 to 0.018	Not Rated	Rockwell C52	DIN 6325-m6, ISO 8734	—	1	91595A909	0000
	60	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A709	0000
	70	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A834	0000
	80	0.007 to 0.018	Not Rated	Rockwell C52	DIN 6325-m6, ISO 8734	—	1	91595A913	0000
	90	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A850	00000


	100	0.007 to 0.018	30,500 lbf	Rockwell C58	DIN 6325-m6, ISO 8734	—	1	91595A856	00000

Corrosion-Resistant Stainless Steel About Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant pins, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals. Like 18-8 stainless steel, they're strong enough to join most components but won't withstand stress and vibration as well as steel.

Material Certificate—Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.

	Min. Hardness	Specs. Met	Certificate Type	Pkg. Qty.		Pkg.
18-8 Stainless Steel







	14 mm Diameter

	20	0.007 to 0.018	Not Rated	Not Rated	ISO 2338-m6	—	1	91585A444	00000


	30	0.007 to 0.018	Not Rated	Not Rated	ISO 2338-m6	—	1	91585A445	0000
	40	0.007 to 0.018	Not Rated	Not Rated	ISO 2338-m6	—	1	91585A446	0000
	50	0.007 to 0.018	Not Rated	Not Rated	ISO 2338-m6	Material Certificate	1	91585A447	0000


	Highly Corrosion-Resistant 316 Stainless Steel







					14 mm Diameter

					20	0.007 to 0.018	Not Rated	Not Rated	ISO 2338-m6	—	1	93600A348	0000


					30	0.007 to 0.018	Not Rated	Not Rated	ISO 2338-m6	Material Certificate	1	93600A349	0000
					50	0.007 to 0.018	Not Rated	Not Rated	ISO 2338-m6	—	1	93600A352	00000

Corrosion-Resistant Rod End Nuts

Made of stainless steel for excellent corrosion resistance, these nuts make pivoting and hinge movements where misalignment is not a concern. Attach them to rods, pipes, and tubes to control air- and hydraulic-powered arms as well as other components in power transmission systems. They have a rubber bushing to reduce noise and vibration.

Round Shank

	ID, mm	Overall Dia., mm	Shank Ctr. Lg., mm	Shank Thread Lg., mm	Tensile Strength	Material		Each
Right-Hand Shank Thread



	M8 × 1.25 mm	8.1	14	19	11	Not Rated	303 Stainless Steel	8404N12	000000

Tight-Tolerance Oil-Hardening O1 Tool Steel Rods

Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance. They’re also known as drill rod. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion. It can also be surface hardened with heat treating for added wear resistance.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Heat Treatment	Yield Strength, psi	Mechanical Finish	Hardness	Max. Hardness After Heat Treatment	Specs. Met		3 ft. Long	6 ft. Long
14	-0.0250 to 0.0250	Hot Rolled	Annealed	50,000	Precision Ground	Rockwell B90 (Medium)	Rockwell C65	ASTM A681	8893K284	000000	000000

Keyed Rotary Shafts

Match with a machine key to prevent slipping while transmitting torque to gears and other components. Turned, ground, and polished to tight tolerances, these shafts reduce vibration, evenly distribute loads, and improve accuracy.

Fully Keyed

Mount components anywhere along the length of these shafts. For secure torque transmission, slide a component from either end and lock it into place with an ANSI machine key (sold separately).

Carbon Steel—Strong and easy to machine. These shafts work best in dry environments since moisture will cause steel to rust.

		Keyway						Material
	Lg., mm	Lg.	Wd.	Dp.	ANSI Keys Included	Straightness Tolerance	Dia. Tolerance, mm	Hardness	Hardness Rating		Each
Carbon Steel







				14 mm Diameter

				200	200 mm	5 mm	3 mm	No	0.33 mm/300 mm	-0.0635 to 0	Rockwell B95	Medium	1439K26	000000


				400	400 mm	5 mm	3 mm	No	0.33 mm/300 mm	-0.0635 to 0	Rockwell B95	Medium	1439K27	00000
				1,000	1,000 mm	5 mm	3 mm	No	0.33 mm/300 mm	-0.0635 to 0	Rockwell B95	Medium	1439K28	00000
				2,000	2,000 mm	5 mm	3 mm	No	0.33 mm/300 mm	-0.0635 to 0	Rockwell B95	Medium	1439K29	000000

Highly Wear-Resistant 420 Stainless Steel Rods

Highly wear resistant, 420 stainless steel is used for wrenches, shafts, and other parts that frequently grind against metal. High carbon content boosts its hardness and strength. Yet like other 400 series stainless steel, 420 is less corrosion resistant than 304. It maintains its corrosion resistance in temperatures up to 1150° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
14	0 to 0.0127	Cold Worked	Rockwell C25 (Hard)	Rockwell C50	ASTM A276	3234T37	000000	0000000	0000000

Tight-Tolerance Machinable 416 Stainless Steel Rods

The easiest type of stainless steel to machine into precision parts. Ground to tight diameter tolerances, these rods are all set to turn in your lathe.

Even at whirring speeds, 416 cuts precisely without clogging your cutting tools because it's alloyed with sulfur. It won't wear down when it grinds against other metal parts, so it's a good choice for gears, screws, and shafts. It also maintains its corrosion resistance in temperatures as hot as 1200° F. However, it's not as corrosion resistant as other types of stainless steel, such as 304 and 17-4 PH.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
14	-0.0127 to 0	Cold Worked	Rockwell B80 (Medium)	Rockwell C40	ASTM A582	88955K87	000000	0000000	0000000

Tight-Tolerance Ultra-Wear-Resistant 440C Stainless Steel Rods

Smoother and straighter than standard 440C stainless steel rods, these rods are made to tight tolerances with centerless grinding. They’re used to create cylindrical parts where a consistent diameter is key, such as bearings and drive shafts. The high carbon content in 440C stainless steel helps it withstand abrasion and wear better than any other stainless steel. Like tool steel, it can be heat treated to become extremely hard. It also maintains its corrosion resistance in temperatures up to 800° F. However, it’s more likely to break than bend from impacts.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long
14	-0.0127 to 0	Cold Worked	Rockwell C20 (Hard)	Rockwell C60	ASTM A276, SAE AMS5630	9094K42	000000	000000	000000	000000

Wear-Resistant 410 Stainless Steel Rods

Highly wear resistant, 410 stainless steel is used for parts such as tapping screws, which cut into sheet metal without deforming. It's less corrosion resistant than 304, 17-4 PH, and other stainless steel, but still more so than steel. 410 is one of the most common wear-resistant types of stainless steel. It maintains its corrosion resistance in temperatures up to 1200° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Fabrication	Hardness	Max. Hardness After Heat Treatment	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
14	-0.012 to 0	Cold Worked	Rockwell B80 (Medium)	Rockwell C40	ASTM A276	86705K71	000000	0000000	0000000