60 mm Shaft Diameter Roller Bearings

Filter by

System of Measurement

Width

For Load Direction

Combined Radial and Thrust

Combined Radial, Thrust, and Moment

Bearing Seal Type

Bearing Type

Bearing Trade Number

Bearing Construction

Dynamic Radial Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

For Housing ID

90.000 mm to 90.035 mm

Shaft Type

Material

Lubrication

Rotation Speed

10,000 rpm to 19,999 rpm

Static Radial Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

REACH

Shaft Mount Type

RoHS

Dynamic Thrust Load Capacity

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Static Thrust Load Capacity

20,000 lb. to 99,999 lb.

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

50 Products

Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.

						Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Ring Material	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Max. Temp., ° F		Each
Open Bearing



		60	110	28	22212	Steel	40,000	39,100	4,800	Required	390	2721T8	0000000

Thin-Profile Crossed-Roller Bearings

For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		60	71	5	590	910	1,200	Required	0 to 175	Two Lubrication Holes	1378N63	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				60	76	8	1,250	1,950	500	Lubricated	0 to 175	Lubrication Groove, Lubrication Hole	1378N69	000000

Tapered-Roller Bearings

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

					Radial Load Cap., lb.		Thrust Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Dynamic	Static	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F		Each
For Combined Radial and Thrust Load—Open with Steel Ring



		60	95	17.5	32012	5,600	29,500	4,100	37,000	1,800	Required	-60 to 200	6677K81	000000

Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

				Radial Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	For Shaft Surface Smoothness, Ra, μin	Temp. Range, ° F	Specs. Met		Each
For Radial Load—Open with Steel Ring



		60	68	12	3,900	7,150	4,450	Required	8	-20 to 280	DIN 618, ISO 3245	5905K566	000000


		60	68	20	7,500	16,850	4,450	Required	8	-20 to 280	DIN 618, ISO 3245	5905K567	00000
		60	68	32	11,900	30,300	4,450	Required	8	-20 to 280	DIN 618, ISO 3245	5905K568	00000

Ball Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 440C Stainless Steel—Combine the strength of steel with the corrosion resistance of stainless steel. These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they'll weaken when exposed to salt water and harsh chemicals, such as bleach.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				60	78	10	1	2,550	9,400	-50	130	Standard	6812	6656K148	000000


				60	85	13	1	4,500	8,900	-50	130	Standard	6912	6656K149	00000
				60	110	22	1	11,600	9,300	-20	230	Standard	6212	5972K3	00000
				60	130	31	1	18,300	7,900	-20	230	Standard	6312	5972K128	00000


				Shielded







								Steel

								60	78	10	1	2,550	8,000	-40	150	Standard	6812-2Z	6656K236	00000


								60	85	13	1	4,500	7,500	-40	150	Standard	6912-2Z	6656K237	00000
								60	95	18	1	7,050	8,500	-20	230	Standard	6012-2Z	5972K274	000000
								60	95	18	3	6,900	7,500	-20	230	Standard	6012-2Z	4481N22	000000
								60	110	22	1	11,600	6,000	-20	230	Standard	6212-2Z	5972K346	00000
								60	110	22	3	12,400	6,300	-20	230	Standard	6212-2Z	4481N38	000000
								60	130	31	1	18,400	5,300	-20	230	Standard	6312-2Z	5972K362	00000
								60	130	31	3	19,150	5,600	-20	230	Standard	6312-2Z	4481N52	000000


								Sealed







												Steel

												60	95	18	1	7,050	3,700	-20	230	Standard	6012-2RS	5972K236	000000


												60	95	18	3	6,900	4,500	-30	210	Standard	6012-2RS	4481N68	000000
												60	110	22	1	11,600	3,500	-20	230	Standard	6212-2RS	5972K54	00000
												60	110	22	3	12,400	4,000	-30	210	Standard	6212-2RS	4481N82	000000
												60	130	31	1	18,300	3,300	-20	230	Standard	6312-2RS	5972K65	00000
												60	130	31	3	19,150	3,400	-30	210	Standard	6312-2RS	4481N92	000000




														Corrosion-Resistant 440C Stainless Steel

														60	95	18	1	6,600	4,000	-20	210	Standard	6012-2RS	6138K117	000000


60	110													22	1	11,800	4,000	-20	210	Standard	6212-2RS	6138K118	000000
60	130													31	1	18,400	3,400	-20	210	Standard	6312-2RS	6138K119	000000

Self-Aligning Ball Bearings

Open

Misalignments correct themselves on the fly in these bearings. Two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

								Temp. Range
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Min.	Max., ° F	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				60	110	28	1	7,600	5,300	4°	Not Rated	210	Standard	2212	6660K352	0000000

High-Load Crossed-Roller Bearings

The thicker inner and outer raceways on these bearings can handle heavier loads than the thin-profile crossed-roller bearings. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		60	90	13	4,200	5,450	1,000	Required	0 to 230	Lubrication Groove, Two Lubrication Holes	1378N12	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				60	90	13	4,200	5,400	800	Lubricated	0 to 210	Lubrication Groove, Two Lubrication Holes	1378N22	000000

Permanently Lubricated Ball Bearings

Install and forget these self-lubricating bearings. Their lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				60	110	22	1	9,050	3,300	10	200	Standard	6212	2349K711	0000000


				60	130	31	1	14,150	3,000	10	200	Standard	6312	2349K724	000000


				Sealed







								Steel

								60	95	18	1	5,100	3,700	10	200	Standard	6012-2RS	2349K753	000000


								60	110	22	1	10,000	3,500	10	200	Standard	6212-2RS	2349K765	000000
								60	130	31	1	14,150	3,100	10	200	Standard	6312-2RS	2349K779	000000

High-Precision Angular Contact Ball Bearings

Sealed

Our most precise bearings for tackling radial and thrust loads at once, with tolerances tighter than a speck of dust. Rated ABEC 7 out of 9, they meet strict tolerance standards established by the Annular Bearing Engineers Committee (ABEC). Choose them for equipment that requires both high speed and pinpoint accuracy, such as machine tool spindles. For example, a bearing on a spindle withstands a radial load as it spins at high speeds and a thrust load when the cutting tool touches the workpiece. These bearings don’t handle as much force from radial loads as standard ones, but you can pair them with a cylindrical roller bearing to increase their load capacity.

Single Row—Single-row bearings withstand thrust loads from one direction.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Single Row







				Sealed

				60	95	18	7	Steel	8,300	14,900	Lubricated	15°	0	230	7012	4487N17	000000000

Washers for Needle-Roller Thrust Bearings

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

For Shaft Dia., mm	OD, mm	Thk., mm	Washer Material	Specs. Met		Each
60	85	1	Steel	DIN 5405-3, ISO 303	5909K299	00000
60	85	4.75	Steel	—	5909K581	00000

Needle-Roller Thrust Bearings


Bearings	Washers

Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.

A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Thrust Bearings										Thin Washers			Thick Washers
	For Shaft Dia., mm	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Specs. Met		Each	Thk., mm		Each	Thk., mm		Each
Steel



		60	85	3	Steel	10,000	4,000	0 to 240	DIN 5405-2	5909K5	000000	1	5909K299	00000	4.75	5909K581	000000

High-Load Cylindrical-Roller Thrust Bearings

Thick, pop-can-shaped rollers balance strength and speed. These bearings reduce friction and support heavier loads than ball or needle-roller thrust bearings.

They come as three separate pieces—one cage and two washers. The cage holds the rollers in place, while the washers create a surface for the rollers to run on. This design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Includes		Each
Steel



	60	85	17	Nylon	23,150	3,950	-25 to 245	Two Washers	4300N22	0000000

Mounted Ball Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The sturdy housing bolts down to support shafts as they turn.

Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris.

Powder-Coated Cast Iron Housing—A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Locknut—Tighten the nut for a strong hold that stands up to heavy vibrations without letting go. An adapter sleeve is required and sold separately.

Sealmaster—Famous for exceptional sealing, Sealmaster bearings include a signature three-part seal in the inner ring. This design blocks out gritty debris and purges old grease to extend the life of the bearing.

SKF—Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Required Adapter Sleeves
			Overall, mm
	For Shaft Dia., mm	Ctr. Ht., mm	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				60	69.9	241.3	74.7	11,700	3,000	Steel	Sealed	2°	Sealmaster	7835T59	0000000	———	0




						Locknut

						60	76.2	265	70.8	12,850	3,000	Steel	Sealed	2°	SKF	7835T162	000000	7835T164	000000

Flange-Mounted Linear Ball Bearings

The flanged housing makes these bearings a good solution for vertical linear motion applications. All are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.

Fixed Alignment


Round Flange	Square Flange

		Overall, mm			Flange, mm				Load Capacity, lb.				Mounting Holes
	For Shaft Dia., mm	Lg.	Wd.	Ht.	Thk.	OD	Bolt Circle Dia., mm	OD, mm	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia., mm		Each
Steel Bearings with Round Flange



		60	209	134	134	18	134	112	90	1,650	4,450	-4 to 176	Stainless Steel, Steel	4	11	6483K131	0000000


		Steel Bearings with Square Flange



				60	125	106	106	18	—	112	90	1,050	2,200	-4 to 176	Stainless Steel, Steel	4	11	6483K151	000000

High-Temperature Linear Ball Bearings

The choice for low-friction motion in high-temperature environments. Bearings are for use with round end-supported shafts and have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included).

Fixed Alignment


With Retaining Ring Grooves

With Retaining Ring Grooves—For bearings with retaining ring grooves, secure with two retaining rings (sold individually).

	Bearings															Retaining Rings
								Load Capacity, lb.			Temp., ° F
	For Shaft Dia., mm	Overall Lg., mm	OD, mm	For Housing ID	With Retaining Ring Grooves	Retaining Ring Groove End-to-End Lg., mm	With End Seals	Dynamic	Static	Dynamic Load Cap. @ Temp.	Min.	Max.	For Shaft Material		Each	Pkg. Qty.		Pkg.
Steel Bearings with Steel Balls



		60	110	90	90.000 mm to 90.035 mm	Yes	85	No	1,050	2,200	1,050 lb. @ 230° F	-4	230	Stainless Steel, Steel	63255K93	0000000	1	98541A210	00000

Mounted Ball Bearings with Four-Bolt Flange

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The four-bolt flange supports shafts with a stronger connection to the mounting surface than two-bolt alternatives.

Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall, mm
	For Shaft Dia., mm	Lg.	Wd.	Flange Thk., mm	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each
Powder-Coated Cast Iron Housing







				Set Screw

				60	174.6	68.3	20.6	11,700	3,000	Steel	Sealed	2°	Sealmaster	1485N9	0000000

Thrust Ball Bearings

For silky-smooth motion, the balls inside these bearings roll nearly friction-free. You'll often find them at the end of a shaft or between a stationary and rotating surface, such as on a propeller or rotary table.

These bearings come as three separate pieces—one cage and two washers. The cage holds the balls in place, while the washers create a surface for the balls to roll on. This design is easy to lubricate, but the oil will attract dust and grime since it's exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Includes		Each
Steel



	60	85	17	Steel	9,300	3,700	-40 to 250	Two Washers	7806K722	0000000