Adding and Connecting Roller Chain and Links

Filter by

Roller Chain Trade Number

Link Type

Adding and Connecting

Strand Type

Pitch

Material

Component

Roller Chain Type

Chain Style

Roller Width

Roller Diameter

Chain Standard

Working Load

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 9,999 lb.

10,000 lb. or greater

Chain Pitch Type

Performance

Finish

Corrosion-Resistant Coated

Nickel Plated

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Specifications Met

Lubrication

Pinhole Diameter

Bearing Seal Type

119 Products

Roller Chain Type

Standard

Figure-eight shaped side plates grip sprockets without slipping

100 products

Flat Edge

Flat side plates won’t snag items to keep them moving along conveyor lines

13 products

Roller Chain Type

Hollow Pin

Slide rods or attachments through the rollers—no need to break the chain

6 products

Duty Rating

Heavy

Thick side plates absorb jolts from abrupt starts and stops

21 products

Roller Chain and Links

Adding-and-Connecting

Links

Image of Attribute. Front orientation. Contains Annotated.

Pair this chain with sprockets to transmit power between rotating shafts. Like the chain on a bike, the side plates have a figure-eight shape that grips the sprockets without slipping.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Corrosion-Resistant-Coated Steel—Combines the strength of steel with the corrosion resistance of stainless steel. The coating has been tested to withstand 500 hours of salt spray, so it holds up well in wet and outdoor conditions.

Corrosion-Resistant 304 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion resistant roller chain won’t degrade when exposed to salt water and harsh chemicals.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain—except for trade number 25, which requires a separate connecting link. Remove the side plate to install. Also known as half links and offset links.

	Roller Chain						Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.		Each
Single Strand







				Steel

				25	ANSI	1/4"	0.130"	1/8"	140	6261K105	00000


				35	ANSI	3/8"	0.200"	3/16"	560	6261K261	0000
				41	ANSI	1/2"	0.306"	1/4"	500	6261K262	0000
				40	ANSI	1/2"	0.312"	5/16"	940	6261K263	0000
				50	ANSI	5/8"	0.400"	3/8"	1,620	6261K264	0000
				60	ANSI	3/4"	0.469"	1/2"	2,470	6261K265	0000
				80	ANSI	1"	0.625"	5/8"	4,290	6261K266	00000
				100	ANSI	1 1/4"	0.750"	3/4"	6,600	6261K271	00000
				120	ANSI	1 1/2"	0.875"	1"	8,870	6261K272	00000
				140	ANSI	1 3/4"	1.000"	1"	11,740	6261K273	00000
				160	ANSI	2"	1.125"	1 1/4"	15,490	6261K274	00000


				04B	ISO	6 mm	4.00 mm	2.80 mm	130	6027K42	0000
				05B	ISO	8 mm	5.00 mm	3.00 mm	270	6027K43	0000
				06B	ISO	3/8"	0.250"	0.225"	380	6027K65	0000
				081	ISO	1/2"	0.306"	0.122"	300	6027K45	0000
				08B	ISO	1/2"	0.335"	0.305"	700	6027K66	0000
				10B	ISO	5/8"	0.400"	0.380"	1,100	6027K46	0000
				12B	ISO	3/4"	0.475"	0.460"	1,500	6027K47	0000
				16B	ISO	1"	0.625"	0.670"	3,600	6027K48	00000




						Corrosion-Resistant-Coated Steel

						35	ANSI	3/8"	0.200"	3/16"	560	7210K126	0000


						40	ANSI	1/2"	0.312"	5/16"	940	7210K226	0000
						50	ANSI	5/8"	0.400"	3/8"	1,600	7210K326	0000
						60	ANSI	3/4"	0.469"	1/2"	2,450	7210K426	0000
						80	ANSI	1"	0.625"	5/8"	4,100	7210K526	00000
						100	ANSI	1 1/4"	0.750"	3/4"	6,350	7210K626	00000
						120	ANSI	1 1/2"	0.875"	1"	8,500	7210K726	00000
						08B	ISO	1/2"	0.335"	0.305"	700	1222N913	0000
						10B	ISO	5/8"	0.400"	0.380"	1,100	1222N923	0000
						12B	ISO	3/4"	0.475"	0.460"	1,500	1222N933	00000
						16B	ISO	1"	0.625"	0.670"	3,600	1222N943	00000




								Corrosion-Resistant 304 Stainless Steel

								25	ANSI	1/4"	0.130"	1/8"	20	6264K3	00000


								35	ANSI	3/8"	0.200"	3/16"	60	6264K71	0000
								41	ANSI	1/2"	0.306"	1/4"	75	6264K123	00000
								40	ANSI	1/2"	0.312"	5/16"	95	6264K72	00000
								50	ANSI	5/8"	0.400"	3/8"	150	6264K73	00000
60								ANSI	3/4"	0.469"	1/2"	230	6264K74	00000
80	ANSI							1"	0.625"	5/8"	390	6264K75	00000
100	ANSI							1 1/4"	0.750"	3/4"	580	6264K76	00000
120	ANSI							1 1/2"	0.875"	1"	860	6264K77	00000
05B	ISO							8 mm	5.00 mm	3.00 mm	25	60295K72	00000
06B	ISO	3/8"						0.250"	0.225"	60	60295K73	00000


08B	ISO	1/2"	0.335"					0.305"	110	60295K74	00000
10B	ISO	5/8"	0.400"					0.380"	150	60295K75	00000
12B	ISO	3/4"	0.475"					0.460"	200	60295K76	00000
16B	ISO	1"	0.625"					0.670"	460	60295K77	00000




		Highly Corrosion-Resistant 316 Stainless Steel

		40	ANSI					1/2"	0.312"	5/16"	95	5960K21	00000


		50	ANSI					5/8"	0.400"	3/8"	150	5960K22	00000


		Double Strand







										Steel

										35-2	ANSI	3/8"	0.200"	3/16"	810	6261K841	0000


				40-2	ANSI					1/2"	0.312"	5/16"	1,350	6261K842	0000
				50-2	ANSI					5/8"	0.400"	3/8"	2,350	6261K843	00000
				60-2	ANSI					3/4"	0.469"	1/2"	3,300	6261K844	00000
				80-2	ANSI					1"	0.625"	5/8"	5,600	6261K845	00000
				100-2	ANSI					1 1/4"	0.750"	3/4"	8,600	6261K923	00000
				120-2	ANSI					1 1/2"	0.875"	1"	11,500	6261K92	00000
				140-2	ANSI					1 3/4"	1.000"	1"	15,300	6261K709	00000
				160-2	ANSI					2"	1.125"	1 1/4"	20,200	6261K94	000000
				06B-2	ISO					3/8"	0.250"	0.225"	650	6027K5	00000
				08B-2	ISO					1/2"	0.335"	0.305"	1,200	6027K6	0000


				10B-2	ISO					5/8"	0.400"	0.380"	1,800	6027K7	00000
				12B-2	ISO					3/4"	0.475"	0.460"	2,600	6027K8	00000




						Corrosion-Resistant-Coated Steel

						40-2	ANSI			1/2"	0.312"	5/16"	1,350	2331K12	00000


						50-2	ANSI			5/8"	0.400"	3/8"	2,350	2331K14	00000
						60-2	ANSI			3/4"	0.469"	1/2"	3,300	2331K16	00000
						80-2	ANSI			1"	0.625"	5/8"	5,600	2331K18	00000
						08B-2	ISO			1/2"	0.335"	0.305"	1,200	1222N953	00000
						10B-2	ISO			5/8"	0.400"	0.380"	1,800	1222N963	00000
						12B-2	ISO			3/4"	0.475"	0.460"	2,600	1222N973	00000
						16B-2	ISO			1"	0.625"	0.670"	4,800	1222N983	00000




										Corrosion-Resistant 304 Stainless Steel

										40-2	ANSI	1/2"	0.312"	5/16"	190	2327K12	00000


										50-2	ANSI	5/8"	0.400"	3/8"	300	2327K22	00000
										60-2	ANSI	3/4"	0.469"	1/2"	460	2327K32	00000


Triple Strand







												Steel

		40-3										ANSI	1/2"	0.312"	5/16"	2,020	6261K753	00000


		50-3	ANSI									5/8"	0.400"	3/8"	3,500	6261K723	0000
		60-3	ANSI									3/4"	0.469"	1/2"	4,870	6261K763	00000
		80-3	ANSI									1"	0.625"	5/8"	8,250	6261K718	00000

Heavy Duty Roller Chain and Links

Adding-and-Connecting

Links

Minimize shock loads—the thick side plates on this chain absorb jolts from motor startups, emergency braking, and sudden reversing. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Steel with Through-Hardened Pins—Even stronger than standard steel chain, the pins in this chain are treated to withstand the most extreme shock loads.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.

	Roller Chain						Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.		Each
Single Strand







				Steel

				50H	ANSI	5/8"	0.400"	3/8"	1,620	7265K425	00000


				60H	ANSI	3/4"	0.469"	1/2"	2,000	7265K525	0000
				80H	ANSI	1"	0.625"	5/8"	3,400	7265K625	0000
				100H	ANSI	1 1/4"	0.750"	3/4"	5,200	7265K725	00000
				120H	ANSI	1 1/2"	0.875"	1"	7,000	7265K825	00000
				140H	ANSI	1 3/4"	1.000"	1"	9,200	7265K925	00000
				160H	ANSI	2"	1.125"	1 1/4"	12,300	7265K928	00000




						Steel with Through-Hardened Pins

						50H	ANSI	5/8"	0.400"	3/8"	1,870	5522N83	00000


						60H	ANSI	3/4"	0.469"	1/2"	2,200	5522N85	00000
						80H	ANSI	1"	0.625"	5/8"	3,300	5522N49	00000
						100H	ANSI	1 1/4"	0.750"	3/4"	5,080	5522N53	00000
						120H	ANSI	1 1/2"	0.875"	1"	6,930	5522N56	00000


						Double Strand







										Steel

										50H-2	ANSI	5/8"	0.400"	3/8"	2,400	5871K33	00000


										60H-2	ANSI	3/4"	0.469"	1/2"	3,400	5871K34	00000
										80H-2	ANSI	1"	0.625"	5/8"	5,800	5871K35	00000

Low-Maintenance Roller Chain and Links

Adding-and-Connecting

Links

Forget the mess and the stress, this chain has bearings that run reliably with little or no need for lubrication. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping.

Oil-Embedded Open Bearings—Made from porous bronze saturated with oil, these bearings don’t require lubrication.

Sealed Bearings—These bearings come with seals to retain the grease you add and reduce the need for additional lubrication. They also keep grease off your equipment and prevent dirt from sticking to the chain.

Steel—The go-to for roller chain, steel is strong and economical. It’s best for dry environments since moisture will cause it to rust.

Corrosion-Resistant Nickel-Plated Steel—A step up from plain steel, the nickel plating adds a layer of rust protection in wet environments. However, if scratched, the underlying steel may still rust. The plating may also hinder welding.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.

	Roller Chain							Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.	Lubrication		Each
Oil-Embedded Open Bearings







				Steel

				40	ANSI	1/2"	0.312"	19/64"	810	Lubricated	7311K226	000000


				50	ANSI	5/8"	0.400"	23/64"	1,400	Lubricated	7311K326	00000
				60	ANSI	3/4"	0.469"	31/64"	1,950	Lubricated	7311K426	00000
				80	ANSI	1"	0.625"	39/64"	3,300	Lubricated	7311K526	00000




						Corrosion-Resistant Nickel-Plated Steel

						40	ANSI	1/2"	0.312"	19/64"	680	Lubricated	2336K12	00000


						50	ANSI	5/8"	0.400"	23/64"	1,200	Lubricated	2336K14	00000
						60	ANSI	3/4"	0.469"	31/64"	1,600	Lubricated	2336K16	00000


						Sealed Bearings







										Steel

										40	ANSI	1/2"	0.312"	5/16"	830	Required	60125K914	00000


										50	ANSI	5/8"	0.400"	3/8"	1,500	Required	60125K915	00000
										60	ANSI	3/4"	0.469"	1/2"	2,050	Required	60125K633	00000

Clog-Resistant Flat-Edge Roller Chain and Links

Adding-and-Connecting

Links

Debris falls through this chain, so it doesn’t jam the rollers and bring everything to a halt. Originally designed to move lumber while letting splinters and sawdust drop to the floor, this chain has the largest roller spacing in our offering. Flat, oblong side plates create a level surface that keeps items moving along conveyor lines with no hang-ups. Unlike standard roller chain, there are no divots to snag products. Pair this chain with sprockets to transmit power between rotating shafts.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.

						Adding-and-Connecting Links
	Roller Chain Trade No.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.		Each
Single Pitch







				Steel

				81X	2.609"	0.906"	1 1/16"	2,700	5597N17	000000

Flat-Edge Roller Chain and Links

Adding-and-Connecting

Links

No more hang-ups thanks to the flat, oblong side plates that create a level surface to keep items moving along conveyor lines. Unlike standard roller chain, there are no divots to snag products. Pair this chain with sprockets to transmit power between rotating shafts.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Double Pitch—This chain has links that are twice as long as those on a single-pitch chain, making it lighter in weight and more energy-efficient over long drives. However, it operates at slower speeds. Use it with standard sprockets that have at least 24 teeth.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Corrosion-Resistant 304 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.

C2060H and C2080H—Best for minimizing shock loads from abrupt starts and stops. The thick side plates on this chain absorb jolts from motor startups, emergency braking, and sudden reversing.

	Roller Chain						Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.		Each
Double Pitch







				Steel

				C2040	ANSI	1"	0.312"	5/16"	600	60815K213	00000


				C2050	ANSI	1 1/4"	0.400"	3/8"	1,000	60815K223	0000
				C2060H	ANSI	1 1/2"	0.469"	1/2"	1,400	60815K233	0000
				C2080H	ANSI	2"	0.625"	5/8"	2,400	60815K243	00000




						Corrosion-Resistant-Coated Steel

						C2040	ANSI	1"	0.312"	5/16"	600	1060N512	0000


						C2050	ANSI	1 1/4"	0.400"	3/8"	1,000	1060N522	0000
						C2060H	ANSI	1 1/2"	0.469"	1/2"	1,400	1060N532	0000
						C2080H	ANSI	2"	0.625"	5/8"	2,400	1060N542	00000




								Corrosion-Resistant 304 Stainless Steel

								C2040	ANSI	1"	0.312"	5/16"	95	2335K13	00000


								C2050	ANSI	1 1/4"	0.400"	3/8"	150	2335K23	00000
								C2060H	ANSI	1 1/2"	0.469"	1/2"	230	2335K33	00000
								C2080H	ANSI	2"	0.625"	5/8"	390	2335K43	00000

Hollow-Pin Roller Chain and Links

Adding-and-Connecting

Link

Slide rods or other attachments straight through the rollers. With hollow pins, there’s no need to take this chain apart or add attachment links like you would with standard roller chain. Pair the chain with sprockets to transmit power between rotating shafts. It’s commonly used in conveying applications.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Corrosion-Resistant 304 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.

	Roller Chain							Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.	Pinhole Dia.		Each
Single Strand







				Steel

				40	ANSI	1/2"	0.312"	5/16"	390	0.157"	7272K326	000000


				50	ANSI	5/8"	0.400"	3/8"	700	0.202"	7272K426	00000
				60	ANSI	3/4"	0.469"	1/2"	940	0.236"	7272K526	00000
				80	ANSI	1"	0.625"	5/8"	1,700	0.316"	7272K626	00000




						Corrosion-Resistant 304 Stainless Steel

						40	ANSI	1/2"	0.312"	5/16"	95	0.157"	2326K12	00000


						50	ANSI	5/8"	0.400"	3/8"	150	0.202"	2326K14	00000