Forget the mess and the stress, this chain has bearings that run reliably with little or no need for lubrication. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping.

Slide rods or other attachments straight through the rollers. With hollow pins, there’s no need to take this chain apart or add attachment links like you would with standard roller chain. Pair the chain with sprockets to transmit power between rotating shafts. It’s commonly used in conveying applications.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Say goodbye to messy grease and time-consuming maintenance. This chain has plastic bearings that run smoothly without lubrication. Paired with stainless steel pins and side plates, it’s lightweight, quiet-running, and resistant to mild chemicals. The chain withstands starts and stops better than all-plastic chain, but it handles only a fraction of the load of all-metal chain. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping.

Thanks to extra space between components, this chain flexes side to side to take on misaligned sprockets or curved conveyor paths. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping. Also known as bow chain.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

No more hang-ups thanks to the flat, oblong side plates that create a level surface to keep items moving along conveyor lines. Unlike standard roller chain, there are no divots to snag products. Pair this chain with sprockets to transmit power between rotating shafts.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Drive out chain pins with a twist of the handle. Breakers allow you to disassemble chain in order to remove or add links.

Place these steel inserts between two roller links. If they can be inserted past your ANSI number, the chain is worn out.

Mount these tensioners directly onto your chain drive. They have adjustable straps that take up slack and apply constant tension. Because they engage with the side plates instead of the rollers, they increase the life of your roller chain.

Skip the hassle of adding attachment links, this chain arrives with them already installed. No disassembly required, just pick your length and get moving. Use this chain to mount brackets and guides, move items directly, or trip switches with tabs or pins in conveying, timing, and aligning setups. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Connecting Link—Use a single link to join both ends of your chain. Start by removing the spring clip or cotter pin from the link’s side plate. Then, slide the link pins into the mating rollers at each end of your chain and snap the clip back on. Also known as master links.

Adding Link—Attach with a connecting link to extend the length of your chain. Each link adds a length equal to the chain’s pitch. Also known as roller links.

Tighten the hex head screw with a wrench to remove chain pins without damaging side plates. Breakers allow you to disassemble chain in order to remove or add links.

Also known as captured guides, deep-channel guides prevent chain from slipping off track. Use them to minimize friction, reduce noise, and prolong the life of your roller chain. They can be cut to the exact length you need.

Minimize friction, reduce noise, and prolong the life of your roller chain. Guides can be cut to the exact length you need.

Push both chain pins out of your roller chain with the pull of a handle. These chain breakers make it easy to disassemble your chain to add or remove links. Since they mount to a work surface, they give you extra leverage and are convenient for frequent jobs.

At less than 4" in height, these tensioners are good for use on low-clearance drives. Built-in springs put constant tension on roller chain to absorb and buffer shock, reduce vibration, and improve drive performance.

These guides align chain more precisely than open-channel guides. Use them to minimize friction, reduce noise, and prolong the life of your roller chain. They can be cut to the exact length you need.

Install these rings between strands of chain to absorb slack without the need for realignment, lubrication, or tools—good for use in confined spaces where maintenance may be difficult.

Built-in springs put constant tension on roller chain to absorb and buffer shock, reduce vibration, and improve drive performance.