Filter by
System of Measurement
Roller Diameter
Door Mounting Hardware
Component
Weight Capacity
Track Capacity
Finish
For Use With
Bearing Material
Roller Mount Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Track Rollers
 |
Eyebolt |
 |
Unthreaded Hole |
Use these rollers as replacements on an existing door hanger or as the starting point for a customized hanger. Choose rollers that fit the inside width or diameter of your door track.
Ball Bearing—Rollers with ball bearings travel more smoothly and quietly than rollers with roller bearings.
Acetal Bearing—Acetal bearings are quieter and more corrosion resistant than steel bearings. The acetal is self-lubricating to help bearings travel smoothly.
Steel Bearing—Steel bearings are stronger and more durable than acetal bearings.
Eyebolt—Rollers with an eyebolt mount pivot if doors or curtains sway to reduce stress on your track. Attach them to doors with bolts, S-hooks, or shackles.
Unthreaded Hole—Rollers with an unthreaded-hole mount have a horizontal plate with a hole. Add a bolt or a mounting plate to attach a door.
Roller Tracks for Doors
 |
Combine tracks, mounting brackets, hangers, and end stops to create a system for hanging doors.
Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
Hangers with Bolt
 |  |
Standard Hangers | Offset Hangers |
Choose a hanger that fits your inside track width. These hangers are sold individually and come with bolts to attach to the door. They adjust vertically within the bolt's thread length. Hangers with more rollers distribute heavy loads more evenly, giving your door more support and smoother movement. Two hangers per door are required.
Offset Hangers—Offset hangers have a 1/2" offset to provide clearance between your door and wall.
304 Stainless Steel—304 stainless steel components have better corrosion resistance than galvanized steel and powder-coated steel components. They won’t rust when exposed to mild chemicals or detergents.
Rollers | Bearing | Thread | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Inside Track Wd. | Wt. Cap. per Pair, lb. | Ht. | Max. Vert. Adjustment | No. of | Dia. | Type | Material | Size | Lg. | Mounting Fasteners Included | Each | |||
Standard Hangers | ||||||||||||||
Zinc-Plated Steel | ||||||||||||||
| 1 3/4" | 400 | 4 1/4" | 1 3/8" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 2 1/8" | Yes | 1143A61 | 000000 | ||
| 1 3/4" | 400 | 5 1/2" | 2 3/4" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 3 3/8" | Yes | 1143A62 | 00000 | ||
| 1 3/4" | 400 | 6 1/2" | 3 3/4" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 4 3/8" | Yes | 1143A63 | 00000 | ||
304 Stainless Steel | ||||||||||||||
| 1 3/4" | 400 | 4 13/16" | 2 3/16" | 2 | 2 1/8" | Ball | 304 Stainless Steel | 1/2"-13 | 2 3/16" | Yes | 1090A2 | 000000 | ||
Offset Hangers | ||||||||||||||
Zinc-Plated Steel | ||||||||||||||
| 1 3/4" | 400 | 11 7/8" | 7" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 7" | Yes | 1143A71 | 00000 | ||
Hangers with Mounting Plate
 |  |
Zinc-Plated Steel | 304 Stainless Steel |
Choose a hanger that fits your inside track width. These hangers are sold individually and come with mounting plates and fasteners to attach to the door. Hangers with more rollers distribute heavy loads more evenly, giving your door more support and smoother movement. Two hangers per door are required.
Steel, stainless steel, and iron hangers adjust vertically between the bottom of the track and the top of the door.
Aluminum hangers attach to the top of doors, including those made of T-slotted framing.
304 Stainless Steel—304 stainless steel components have better corrosion resistance than galvanized steel and powder-coated steel components. They won’t rust when exposed to mild chemicals or detergents.
Vert. Adjustment | Rollers | Bearing | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Inside Track Wd. | For Door Thk. | Wt. Cap. per Pair, lb. | Ht. | Mounting Plate Ht. | Min. | Max. | No. of | Dia. | Type | Material | Mounting Fasteners Included | Each | |||
Standard Hangers | |||||||||||||||
Zinc-Plated Steel | |||||||||||||||
| 1 3/4" | 1 1/2" to 2 1/4" | 400 | 11 1/16" | 6" | 1 1/4" | 2 1/2" | 2 | 2 1/8" | Roller | Steel | Yes | 1206A18 | 0000000 | ||
304 Stainless Steel | |||||||||||||||
| 1 3/4" | 1 1/2" to 2 1/4" | 400 | 10 13/16" | 6" | 1 1/4" | 2 1/2" | 2 | 2 1/8" | Ball | 304 Stainless Steel | Yes | 1090A5 | 000000 | ||
Curved Roller Tracks for Doors, Curtains, and Strip Doors
 |
Curved and straight track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors. Combine tracks, mounting brackets, hangers, and trolleys that fit the same inside track width to create a system. Select components that will support the capacity of the door or curtain you intend to hang up.
Hangers with Eyebolt
 |
Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door or curtain. Hangers with an eyebolt use an S-hook or shackle (not included) to hang curtains or strip doors.
Rollers | Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap., lb. | For Inside Track Wd. | Ht. | Material | No. of | Dia. | Material | Type | Eyebolt ID | Mounting Fasteners Included | Each | |||
For 600 lb. Track Capacity | |||||||||||||
| 225 | 1 3/4" | 6" | Zinc-Plated Steel | 2 | 2 1/8" | Steel | Roller | 1" | No | 1212A8 | 000000 | ||
Hangers with Mounting Plate
 |  |
Style B | Style C |
Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door. Hangers with a mounting plate attach to the top of your door and extend down the side.
Style C—Style C hangers adjust vertically between the bottom of the track and the top of the door.
Powder-Coated Steel—Powder-coated steel components are durable to resist wear and tear over time.
Rollers | Bearing | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Wt. Cap., lb. | For Inside Track Wd. | Ht. | Mounting Plate Ht. | Material | No. of | Dia. | Material | Type | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | |||
For 600 lb. Track Capacity | ||||||||||||||||
| B | 75 | 1 3/4" | 3" | 2 23/32" | Zinc-Plated Steel | 1 | 2 1/8" | Plastic | Roller | — | No | 1/4" | 1222A1 | 000000 | ||
| C | 300 | 1 3/4" | 13 1/8" | 6 27/32" | Powder-Coated Steel | 1 | 2 1/8" | Steel | Ball | Gray | Yes | 5/16" | 1862A37 | 000000 | ||
Hangers with Bolt
 |  |
1 Roller | 2 Rollers |
Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door. Hangers with a bolt fasten through the top of your door. You can adjust them vertically within the bolt's thread length.
Rollers | Bearing | Thread | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap. per Pair, lb. | For Inside Track Wd. | Ht. | Max. Vert. Adjustment | Material | No. of | Dia. | Material | Type | Size | Lg. | Mounting Fasteners Included | Each | |||
For 600 lb. Track Capacity | |||||||||||||||
| 300 | 1 3/4" | 5 3/8" | 2 3/4" | Steel | 2 | 2 1/8" | Steel | Roller | 1/2"-13 | 2 3/4" | Yes | 1291A26 | 000000 | ||
| 600 | 1 3/4" | 6 13/16" | 3 1/2" | Steel | 1 | 2 1/8" | Steel | Ball | 5/8"-11 | 3 1/2" | Yes | 1862A36 | 000000 | ||
Slim-Tread Drive Rollers
 |  |
A narrow O-ring tread provides both a sure grip and a delicate touch, making these rollers good for light duty tasks such as those involving paper and tape. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power. O-ring is Buna-N, which is nonmarring and resistant to oil and abrasion.
Roller | Hub | Set Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temp. Range, ° F | Hardness (Hardness Rating) | Each | |||
Buna-N Rollers with Acetal Hub | |||||||||||||
| 2 1/8" | 3/16" | 1/4" | 1" | 1/2" | Set Screw | 1 | Yes | -30 to 250 | Durometer 70A (Hard) Black | 2471K25 | 000000 | ||
Low-Profile Roller Tracks for Doors
Hangers with Mounting Plate
 |
Two hangers per door are required.
Rollers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap. per Pair, lb. | For Max. Door Thk. | Ht. | Mounting Plate Ht. | Material | No. of | Dia. | Material | Mounting Fasteners Included | Each | ||
| 150 | 1 3/4" | 5 1/2" | 3" | Zinc-Plated Steel | 2 | 2 1/8" | Plastic | Yes | 12635A65 | 000000 | |
Drive Rollers
 |  |
Tapped hubs allow you to mount these drive rollers onto a shaft or stud to transmit power. Also known as contact wheels and feed rollers.
Urethane Rubber Roller—Urethane rubber rollers resist abrasion, wear, and oil. They’re also nonmarring.
Roller | Hub | Set Screws | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Thread Size | Temp. Range, ° F | Hardness (Hardness Rating) | Each | |||
Urethane Rubber Rollers with Aluminum Hub | ||||||||||||||
| 2 1/8" | 1/4" | 1/2" | 1" | 3/8" | Set Screw | 2 | Yes | 10-32 | -40 to 180 | Durometer 55A (Medium) Black | 60885K101 | 000000 | ||
| 2 1/8" | 3/4" | 1/2" | 1" | 3/8" | Set Screw | 2 | Yes | 10-32 | -40 to 180 | Durometer 55A (Medium) Black | 60885K117 | 00000 | ||
