About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
Abrasion-Resistant Flex-Grip Drive Rollers
These urethane rollers are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
Ultra-flexible rollers have larger sidewall holes than flexible rollers, so they compress more and better protect delicate material.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
Ultra-Flexible Urethane Roller with Aluminum Hub | |||||||||||
| 5" | 1" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 000000 |
| 5" | 1" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 5" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 5" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
Abrasion-Resistant Keyed Drive Rollers
These urethane rollers are wear and chemical resistant. They’re also nonmarring. Use them with a keyed shaft to prevent slippage in high-torque applications. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||||
| 5" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 0000000 |
| 5" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
Keyed Drive Rollers
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
SBR Rubber Roller with Cast Iron Hub | |||||||||||||
| 5" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 0000000 |
Shaft-Mount V-Groove Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||
| 5" | 2" | 1 1/8" | 2 1/16" | 1 1/2" | 3/4" | Not Rated | 27,200 | 17,000 | 13,000 | 225° | Tapered Roller | 0000000 | 0000000 |