90mm Rollers | McMaster-Carr

Filter by

System of Measurement

Roller Profile

Roller Width

Roller Mount Type

Shaft Diameter

For Load Direction

Combined Radial and Thrust

Track Roller Type

Dynamic Radial Load Capacity

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

Bearing Type

Ball

Maximum Rotation Speed

Stud Diameter

Stud Length

With Seal

Thread Size

Static Radial Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 39,999 lb.

Material

Overall Width

Groove Width

Groove Depth

Maximum Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

4 Products

High-Load Shaft-Mount Track Rollers


Without Seal

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Crowned Roller Profile—Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

Without Seal—Lubricate rollers without seal through a hole and groove in the inner ring.

	Roller, mm					Load Capacity, lb.
	Dia.	Wd.	For Shaft Dia., mm	Overall Wd., mm	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type	ID, mm	ID Tolerance, mm		Each
Steel Flat Rollers Without Seal



		90	30	50	32	80	33,200	21,600	245	Cylindrical	50	-12 to 0	3670K56	0000000


		Steel Crowned Rollers Without Seal



				90	30	40	32	100	27,400	19,400	245	Cylindrical	40	-12 to 0	3670K49	000000

Threaded Track Rollers

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

	Roller, mm		Stud, mm		Thread		Shoulder, mm			Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg., mm	Dia.	Lg.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type		Each
Black-Oxide Steel Flat Rollers Without Seal







				Hex Roller-Head Drive

				90	35	30	63	M30 × 1.5 mm	32	68	1	2,200	19,000	10,000	250	Needle	1470T661	0000000

Threaded V-Groove Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.

Hex Stud-End Drive


Hex Stud End Drive

With Seal—Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.

	Roller, mm		Stud, mm		Thread		Shoulder, mm		Groove, mm			Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg., mm	Dia.	Lg.	Wd.	Dp.	Max. Rotation Speed	Static Radial	Dynamic Radial	Static Thrust	Max. Temp., ° F	Bearing Type	Includes		Each
Steel V-Groove Rollers With Seal



		90	42.9	24	57.9	M24 × 3 mm	35	32	1.6	28	14	Not Rated	2,260	1,980	1,400	225	Ball Bearing	Mounting Hardware	6318K88	0000000