1 1/4" Wide Rollers | McMaster-Carr

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.

	Roller		Stud		Thread
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Bearing Type	Lubrication	Lubricant	Temp. Range, ° F	Includes	Choose a Hardness (Hardness Rating)		Each
Neoprene Roller with Steel Stud



		1 1/2"	1 1/4"	5/16"	5/8"	5/16"-18	1/2"	Ball	Lubricated	Tena-Film #2500-2-ST	-40 to 200	Mounting Hardware	Durometer 35A (Soft) Black , Durometer 60A (Medium) Black , Durometer 80A (Hard) Black	22875T4	000000

Abrasion-Resistant Threaded-Stud Idler Rollers

These polyurethane rollers are nonmarring and wear resistant. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.

	Roller		Stud		Thread
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Bearing Type	Lubrication	Lubricant	Temp. Range, ° F	Includes	Choose a Hardness (Hardness Rating)		Each
Polyurethane Rubber Roller with Steel Stud



		1 1/2"	1 1/4"	5/16"	5/8"	5/16"-18	1/2"	Ball	Lubricated	Tena-Film #2500-2-ST	-65 to 200	Mounting Hardware	Durometer 35A (Soft) Yellow , Durometer 60A (Medium) Blue , Durometer 80A (Hard) Red	2372T4	000000

Shaft-Mount Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.

Crowned Roller Profile—Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

With Seal—Rollers with seal have end seals to protect rolling elements from dirt and contamination.

	Roller					Load Capacity, lb.
	Dia.	Wd.	For Shaft Dia.	Overall Wd.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type	ID	ID Tolerance		Each
Black-Oxide Steel Flat Rollers Without Seal



		2"	1 1/4"	5/8"	1 5/16"	1,400	21,000	8,000	220	Needle	5/8"	-0.0005" to 0.0001"	6831K19	000000


		2 1/4"	1 1/4"	5/8"	1 5/16"	1,300	21,000	8,000	220	Needle	5/8"	-0.0005" to 0.0001"	6831K21	00000


		Black-Oxide Steel Flat Rollers With Seal



				2"	1 1/4"	5/8"	1 5/16"	1,400	21,000	8,000	220	Needle	5/8"	-0.0005" to 0.0001"	6831K49	00000


				2 1/4"	1 1/4"	5/8"	1 5/16"	1,300	21,000	8,000	220	Needle	5/8"	-0.0005" to 0.0001"	6831K51	00000


				Black-Oxide Steel Crowned Rollers With Seal



						2"	1 1/4"	5/8"	1 5/16"	1,400	21,000	8,000	220	Needle	5/8"	-0.0005" to 0.0001"	3689K22	00000


						2 1/4"	1 1/4"	5/8"	1 5/16"	1,300	21,000	8,000	220	Needle	5/8"	-0.0005" to 0.0001"	3689K23	00000

Threaded Track Rollers

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

Crowned Roller Profile—Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

With Seal—Rollers with seal have end seals to protect rolling elements from dirt and contamination.

	Roller		Stud		Thread		Shoulder			Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type	Includes		Each
Black-Oxide Steel Flat Rollers Without Seal







				Hex Roller-Head Drive

				2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/32"	1/32"	1,400	10,000	8,000	250	Needle	—	1460T26	000000


				2"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 13/32"	1/32"	1,400	21,000	8,000	250	Needle	—	1470T26	000000
				2 1/4"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/32"	1/32"	1,300	10,000	8,000	250	Needle	—	1460T27	000000


				Black-Oxide Steel Flat Rollers With Seal







								Hex Roller-Head Drive

								2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/32"	1/32"	1,400	10,000	8,000	250	Needle	—	1460T56	000000


								2"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 13/32"	1/32"	1,400	21,000	8,000	250	Needle	—	1470T56	000000
								2 1/4"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/32"	1/32"	1,300	10,000	8,000	250	Needle	—	1460T57	000000


								Black-Oxide Steel Crowned Rollers With Seal







												Hex Roller-Head Drive

												2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/32"	1/32"	1,400	10,000	8,000	250	Needle	—	3659K24	000000


												2"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 13/32"	1/32"	1,400	21,000	8,000	250	Needle	—	1480T26	000000
												2 1/4"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/32"	1/32"	1,300	10,000	8,000	250	Needle	—	3659K25	000000


												Steel Flat Rollers With Seal







																Hex Roller-Head Drive

																2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/64"	1/32"	2,200	16,000	9,600	250	Needle	Mounting Hardware	3652K24	00000


																2"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 13/32"	1/32"	2,200	21,000	9,600	250	Needle	Mounting Hardware	3307K7	000000


Steel Crowned Rollers With Seal







																Hex Roller-Head Drive

																2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/64"	1/32"	2,200	16,000	9,600	250	Needle	Mounting Hardware	3652K44	000000


																2"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 13/32"	1/32"	2,200	21,000	9,600	250	Needle	Mounting Hardware	3307K21	000000

Abrasion-Resistant One-Way-Locking Threaded Idler/Drive Rollers

These urethane rubber rollers spin freely in one direction and lock to transmit power in the other. They are nonmarring and wear resistant. Idler direction is clockwise when facing the roller end.

	Roller		Stud		Thread
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Roller Bearing Type	Lubrication	Lubricant	Temp. Range, ° F	Hardness (Hardness Rating)		Each
Urethane Rubber Roller with Steel Stud



		1 1/2"	1 1/4"	5/16"	11/16"	5/16"-18	1/2"	Needle	Lubricated	Aeroshell #14	-65 to 200	Durometer 60A (Medium) Blue	3655K21	000000

High-Load Shaft-Mount Track Rollers


With Seal

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

With Seal—Rollers with seal are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.

	Roller					Load Capacity, lb.
	Dia.	Wd.	For Shaft Dia.	Overall Wd.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type	ID	ID Tolerance		Each
Steel Flat Rollers With Seal



		2"	1 1/4"	5/8"	1 5/16"	4,100	17,000	12,000	250	Cylindrical	0.625"	0.624" to 0.625"	3670K7	0000000


		2 1/4"	1 1/4"	5/8"	1 5/16"	4,100	17,200	12,400	250	Cylindrical	0.625"	0.624" to 0.625"	3670K13	000000

High-Load Threaded Track Rollers


Black-Oxide Steel	Black-Oxide Steel

Steel

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.

Crowned Roller Profile—Crowned rollers have a slight curve, invisible to the naked eye, which helps them stay centered on surfaces that are slightly misaligned or not perfectly flat.

With Seal—Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.

	Roller		Stud		Thread		Shoulder			Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type	Includes		Each
Black-Oxide Steel Flat Rollers Without Seal







				Hex Roller-Head Drive

				2"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 15/32"	1/16"	1,400	18,000	10,000	245	Needle	Mounting Hardware	3643K35	000000


				2 1/4"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 15/32"	1/16"	1,400	18,000	10,000	245	Needle	Mounting Hardware	3643K36	00000


				Black-Oxide Steel Crowned Rollers With Seal







								Hex Roller-Head Drive

								2"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 15/32"	1/16"	1,400	18,000	10,000	245	Needle	Mounting Hardware	3643K72	00000


								2 1/4"	1 1/4"	1 1/8"	2"	1 1/8"-12	1"	1 15/32"	1/16"	1,400	18,000	10,000	245	Needle	Mounting Hardware	3643K73	00000


								Steel Flat Rollers With Seal







												Hex Roller-Head Drive

												2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 1/8"	1/32"	4,100	17,000	12,000	250	Cylindrical	Mounting Hardware	3643K17	000000

Abrasion-Resistant Drive Rollers

These urethane rubber rollers are nonmarring and wear resistant. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.

	Roller			Hub			Set Screws
	Dia.	Wd.	For Shaft Dia.	Dia.	Wd.	Shaft Mount Type	No. Required	Included	Temp. Range, ° F	Choose a Hardness (Hardness Rating)		Each
Urethane Rubber Rollers with Aluminum Hub



		1 1/2"	1 1/4"	3/8"	7/8"	3/8"	Set Screw	2	Yes	-65 to 200	Durometer 35A (Soft) Yellow , Durometer 60A (Medium) Blue , Durometer 80A (Hard) Red	2475K61	000000


		1 1/2"	1 1/4"	1/2"	7/8"	3/8"	Set Screw	2	Yes	-65 to 200	Durometer 35A (Soft) Yellow , Durometer 60A (Medium) Blue , Durometer 80A (Hard) Red	2475K62	00000

Shaft-Mount V-Groove Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.

With Seal—Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.

	Roller				Groove			Load Capacity, lb.
	Dia.	Wd.	For Shaft Dia.	Overall Wd.	Wd.	Dp.	Max. Rotation Speed	Static Radial	Dynamic Radial	Static Thrust	Max. Temp., ° F	Bearing Type		Each
Steel V-Groove Rollers With Seal



		3"	1 1/4"	5/8"	1 5/16"	15/16"	1/2"	Not Rated	1,810	3,400	1,100	225	Tapered Roller Bearing	6321K59	0000000

One-Way-Locking Threaded Idler/Drive Rollers

These rollers spin freely in one direction and lock to transmit power in the other. Made of neoprene, they are oil, flame, gasoline, and weather resistant. Idler direction is clockwise when facing the roller end.

	Roller		Stud		Thread
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Roller Bearing Type	Lubrication	Lubricant	Temp. Range, ° F	Hardness (Hardness Rating)		Each
Neoprene Roller with Steel Stud



		1 1/2"	1 1/4"	5/16"	11/16"	5/16"-18	1/2"	Needle	Lubricated	Aeroshell #14	-40 to 200	Durometer 60A (Medium) Black	3655K11	000000

Corrosion-Resistant Shaft-Mount Track Rollers

	Roller					Load Capacity, lb.
	Dia.	Wd.	For Shaft Dia.	Overall Wd.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type		Each
440C Stainless Steel Flat Rollers With Seal



		2"	1 1/4"	5/8"	1 5/16"	1,400	17,000	7,200	250	Needle	7796K89	0000000

Flanged Shaft-Mount Track Rollers

Shaft-mount track rollers have more mounting flexibility than threaded track rollers. Because they’re flanged, they can handle both radial and thrust (top and side) loads. The flange also provides guidance and helps rollers stay on track. All are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.

	Roller		Shoulder		Flange					Load Capacity
	Dia.	Wd.	Dia.	Lg.	OD	Thick.	For Shaft Dia.	Overall Wd.	Max. Rotation Speed, rpm	Static Radial, lb.	Dynamic Radial	Static Thrust, lb.	Max. Temp., ° F	Bearing Type		Each
Steel Flat Rollers With Seal



		2"	1 1/4"	1"	1/32"	2 11/16"	5/16"	5/8"	1 5/16"	11,000	2,200	Not Rated	560	225	Tapered Roller Bearing	6321K79	0000000


		2 1/4"	1 1/4"	1"	1/32"	2 15/16"	5/16"	5/8"	1 5/16"	11,000	2,200	Not Rated	560	225	Tapered Roller Bearing	6321K81	000000

Thrust-Load-Rated Shaft-Mount Track Rollers

These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as yoke-style cam followers, they have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.

	Roller					Load Capacity, lb.
	Dia.	Wd.	For Shaft Dia.	Overall Wd.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Static Thrust	Max. Temp., ° F	Bearing Type	ID		Each
Black-Oxide Steel Flat Rollers With Seal



		2"	1 1/4"	5/8"	1 5/16"	11,000	2,200	3,600	1,100	250	Ball Bearing	0.625"	6321K19	0000000

Maintenance-Free Threaded Track Rollers

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. Some rollers have end seals to block dirt and contamination.

Crowned Roller Profile—Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

	Roller		Stud		Thread		Shoulder			Load Capacity
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial, lb.	Max. Temp., ° F	Bearing Type	Includes		Each
Steel Flat Rollers Without Seal







				Hex Roller-Head Drive

				2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 1/2"	1/32"	1,200	Not Rated	290	250	Plain Bearing	Mounting Hardware	6721K12	000000


				2 1/4"	1 1/4"	7/8"	2"	7/8"-14	1"	1 1/2"	1/32"	1,200	Not Rated	290	250	Plain Bearing	Mounting Hardware	6721K13	00000


				Steel Crowned Rollers Without Seal







								Hex Roller-Head Drive

								2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 1/2"	1/32"	1,200	Not Rated	290	250	Plain Bearing	Mounting Hardware	6721K123	00000

Threaded V-Groove Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.

Hex Stud-End Drive


Hex Stud End Drive

With Seal—Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.

	Roller		Stud		Thread		Shoulder		Groove			Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Wd.	Dp.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Static Thrust	Max. Temp., ° F	Bearing Type	Includes		Each
Steel V-Groove Rollers With Seal



		2 1/2"	1 1/4"	3/4"	1 3/4"	3/4"-16	7/8"	1"	1/16"	1"	1/2"	6,000	1,100	1,000	680	225	Ball Bearing	Mounting Hardware	6318K63	0000000

Threaded Track Rollers with Adjustable Shoulder

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.

Crowned Roller Profile—Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

	Roller		Stud		Thread		Shoulder				Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Ht. Adjustment Capability	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type	Includes		Each
Steel Flat Rollers With Seal







				Hex Roller-Head Drive

				2"	1 1/4"	7/8"	1"	7/8"-14	1"	1 3/16"	1"	0.03"	2,200	16,000	9,600	250	Needle	Mounting Hardware	3647K22	000000


				2 1/4"	1 1/4"	7/8"	1"	7/8"-14	1"	1 3/16"	1"	0.03"	2,200	16,000	9,600	250	Needle	Mounting Hardware	3647K23	000000


				Steel Crowned Rollers With Seal







								Hex Roller-Head Drive

								2"	1 1/4"	7/8"	1"	7/8"-14	1"	1 3/16"	1"	0.03"	2,200	16,000	9,600	250	Needle	Mounting Hardware	3647K42	000000


								2 1/4"	1 1/4"	7/8"	1"	7/8"-14	1"	1 3/16"	1"	0.03"	2,200	16,000	9,600	250	Needle	Mounting Hardware	3647K43	000000

Drive Rollers

Tapped hubs allow you to mount these drive rollers onto a shaft or stud to transmit power. Also known as contact wheels and feed rollers.

Neoprene Roller—Neoprene rollers resist oil, flames, gasoline, and weather.

	Roller			Hub			Set Screws
	Dia.	Wd.	For Shaft Dia.	Dia.	Wd.	Shaft Mount Type	No. Required	Included	Temp. Range, ° F	Choose a Hardness (Hardness Rating)		Each
Neoprene Rollers with Aluminum Hub



		1 1/2"	1 1/4"	3/8"	7/8"	3/8"	Set Screw	2	Yes	-40 to 200	Durometer 35A (Soft) Black , Durometer 60A (Medium) Black , Durometer 80A (Hard) Black	2474K61	000000


		1 1/2"	1 1/4"	1/2"	7/8"	3/8"	Set Screw	2	Yes	-40 to 200	Durometer 35A (Soft) Black , Durometer 80A (Hard) Black	2474K62	00000

Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Mount them directly onto your shaft or build a custom roller by adding your own hub.

	Roller
	Dia.	Wd.	For Shaft Dia.	Shaft Mount Type	Temp. Range, ° F	Choose a Hardness (Hardness Rating)		Each
Neoprene Rollers with Steel Liner



		1 1/2"	1 1/4"	7/8"	Press Fit	-40 to 200	Durometer 35A (Soft) Black , Durometer 60A (Medium) Black	2476K31	000000

Abrasion-Resistant Rollers


Urethane Rubber Rollers with Steel Insert

These urethane rubber rollers are nonmarring and wear resistant. Mount them directly onto your shaft or build a custom roller by adding your own hub.

Steel Insert—Rollers with steel insert have a retaining ring groove for securing a ball bearing.

	Roller
	Dia.	Wd.	For Shaft Dia.	Shaft Mount Type	Temp. Range, ° F	Choose a Hardness (Hardness Rating)		Each
Urethane Rubber Rollers with Steel Insert



		1 1/2"	1 1/4"	7/8"	Press Fit	-65 to 200	Durometer 35A (Soft) Yellow , Durometer 60A (Medium) Blue	2477K31	000000

Corrosion-Resistant Threaded Track Rollers


440C Stainless Steel	Chrome-Plated Steel

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.

440C Stainless Steel Rollers—440C stainless steel rollers offer better corrosion resistance than chrome-plated steel rollers.

	Roller		Stud		Thread		Shoulder			Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type		Each
440C Stainless Steel Flat Rollers With Seal







				Hex Roller-Head Drive

				2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/64"	1/32"	1,400	6,700	7,200	250	Needle	8043K55	0000000


				Chrome-Plated Steel Flat Rollers With Seal







								Hex Roller-Head Drive

								2"	1 1/4"	7/8"	2"	7/8"-14	1"	1 13/64"	1/32"	1,200	8,200	7,200	250	Needle	3376K8	000000

Threaded V-Groove Track Rollers with Adjustable Shoulder

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.

Hex Stud-End Drive

With Seal—Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.

	Roller		Stud		Thread		Shoulder		Groove			Load Capacity, lb.
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Wd.	Dp.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial	Static Thrust	Max. Temp., ° F	Includes		Each
Steel V-Groove Rollers With Seal



		2 1/2"	1 1/4"	3/4"	1 3/4"	3/4"-16	57/64"	1 3/8"	1/16"	1"	1/2"	6,000	1,100	1,000	470	225	Mounting Hardware	2282K53	0000000

Extreme-Temperature Threaded Track Rollers

Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.

	Roller		Stud		Thread			Load Capacity		Temp., ° F
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Max. Rotation Speed, rpm	Static Radial	Dynamic Radial, lb.	Min.	Max.	Bearing Type		Each
Steel Flat Rollers With Seal







				Slotted Roller-Head Drive

				2"	1 1/4"	7/8"	2"	7/8"-14	1"	100	Not Rated	140	-450	750	Plain Bearing	6717K26	0000000

Ultra-Quiet Threaded Track Rollers


Urethane Coated

The soft rubber or plastic surface on these rollers creates less noise than the metal surfaces found on other track rollers. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.

Polyurethane-Coated Steel Rollers—Polyurethane-coated rollers provide better traction and abrasion resistance than nylon-coated rollers.

	Roller		Stud		Thread		Shoulder			Load Capacity
	Dia.	Wd.	Dia.	Lg.	Size	Lg.	Dia.	Lg.	Max. Rotation Speed	Static Radial	Dynamic Radial	Max. Temp., ° F	Bearing Type		Each
Polyurethane-Coated Steel Flat Rollers With Seal







				Hex Roller-Head Drive

				2 1/4"	1 1/4"	7/8"	2"	7/8"-14	1"	1 9/16"	1/32"	Not Rated	Not Rated	Not Rated	200	Needle	3649K23	0000000