About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel Flat Rollers without Seal | |||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,500 | 5,600 | 4,800 | 250° | Needle Roller | __ | 0000000 | 000000 |
| 1 1/2" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,500 | 11,000 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,300 | 5,600 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,300 | 11,000 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
Black-Oxide Steel Flat Rollers with Seal | |||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,500 | 5,600 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 1/2" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,500 | 11,000 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,300 | 5,600 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,300 | 11,000 | 4,800 | 250° | Needle Roller | __ | 0000000 | 000000 |
Black-Oxide Steel Crowned Rollers with Seal | |||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,500 | 5,600 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 1/2" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,500 | 11,000 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/32" | 1/32" | 2,300 | 5,600 | 4,800 | 250° | Needle Roller | __ | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 2,300 | 11,000 | 4,800 | 250° | Needle Roller | __ | 0000000 | 000000 |
Steel Flat Rollers with Seal | |||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/2" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 3,100 | 11,000 | 4,900 | 250° | Needle Roller | Mounting Hardware | 000000 | 00000 |
Steel Crowned Rollers with Seal | |||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/2" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 3/32" | 1/32" | 3,100 | 11,000 | 4,900 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
High-Load Threaded Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Crowned rollers have a slight curve, invisible to the naked eye, which helps them stay centered on surfaces that are slightly misaligned or not perfectly flat.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel | |||||||||||||||
Flat Rollers with Seal | |||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/32" | 6,000 | 7,000 | 6,200 | 250° | Cylindrical Roller | Mounting Hardware | 0000000 | 000000 |
Black-Oxide Steel | |||||||||||||||
Flat Rollers without Seal | |||||||||||||||
| 1 1/2" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 1/16" | 1/16" | 1,800 | 9,000 | 6,300 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 1/16" | 1/16" | 1,800 | 9,000 | 6,300 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Crowned Rollers with Seal | |||||||||||||||
| 1 1/2" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 1/16" | 1/16" | 1,800 | 9,000 | 6,300 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/8" | 1 1/2" | 7/8"-14 | 3/4" | 1 1/16" | 1/16" | 1,800 | 9,000 | 6,300 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Maintenance-Free Threaded Track Rollers
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Roller | Stud | Thread | Shoulder | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 1/8" | 1/32" | 1,200 | 160 | 250° | Plain | Mounting Hardware | 000000 | 000000 |
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 1/8" | 1/32" | 1,200 | 160 | 250° | Plain | Mounting Hardware | 0000000 | 00000 |
Steel Crowned Rollers without Seal | ||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 1/8" | 1/32" | 1,200 | 160 | 250° | Plain | Mounting Hardware | 00000000 | 00000 |
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 1/8" | 1/32" | 1,200 | 160 | 250° | Plain | Mounting Hardware | 00000000 | 00000 |
Ultra-Quiet Threaded Track Rollers
The soft rubber or plastic surface on these rollers creates less noise than the metal surfaces found on other track rollers. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Urethane-coated rollers provide better traction and abrasion resistance than nylon-coated rollers.
Roller | Stud | Thread | Shoulder | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Static Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Urethane-Coated Steel Flat Rollers with Seal | ||||||||||||
| 1 3/4" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 1/8" | 1/32" | Not Rated | 200° | Needle Roller | 0000000 | 000000 |
Threaded Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Ht. Adjustment Capability | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 1 5/8" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Steel Crowned Rollers with Seal | ||||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Extreme-Temperature Threaded Track Rollers
Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Roller | Stud | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Temp. Range, °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | |||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 100 | 100 | -450° to 750° | Plain | 0000000 | 0000000 |
Maintenance-Free Ultra-Corrosion-Resistant Threaded Track Rollers
With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Roller | Stud | Thread | Shoulder | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Static Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Fiberglass-Reinforced Nylon Flat Rollers with Seal | |||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/16" | 1/16" | 1,800 | 250° | Plain | Mounting Hardware | 0000000 | 000000 |
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 1 3/16" | 1/16" | 1,800 | 250° | Plain | Mounting Hardware | 0000000 | 00000 |
Corrosion-Resistant Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
440C stainless steel rollers offer better corrosion resistance than chrome-plated steel rollers.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 2,500 | 4,400 | 4,000 | 250° | Needle Roller | 0000000 | 0000000 |
| 1 5/8" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 2,300 | 4,400 | 4,000 | 250° | Needle Roller | 0000000 | 000000 |
Chrome-Plated Steel Flat Rollers with Seal | ||||||||||||||
| 1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 1,600 | 4,000 | 4,300 | 250° | Needle Roller | 000000 | 000000 |
Shaft-Mount Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
Roller | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | ID | ID Tolerance | Each | |
Black-Oxide Steel Flat Rollers without Seal | ||||||||||||
| 1 1/2" | 7/8" | 7/16" | 15/16" | 2,500 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 000000 |
| 1 5/8" | 7/8" | 7/16" | 15/16" | 2,300 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 00000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||
| 1 1/2" | 7/8" | 7/16" | 15/16" | 2,500 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/16" | 15/16" | 2,300 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 00000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||
| 1 1/2" | 7/8" | 7/16" | 15/16" | 2,500 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 00000 |
| 1 5/8" | 7/8" | 7/16" | 15/16" | 2,300 | 11,000 | 4,800 | 220° | Needle Roller | 7/16" | -0.0004" to 0.0002" | 0000000 | 00000 |
High-Load Shaft-Mount Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
Rollers with seal are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
Thrust-Load-Rated Shaft-Mount Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as yoke-style cam followers, they have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
Roller | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Black-Oxide Steel Flat Rollers with Seal | |||||||||||
| 1 1/2" | 7/8" | 7/16" | 15/16" | 14,000 | 1,100 | 1,600 | 290 | 250° | Ball | 0000000 | 0000000 |
Corrosion-Resistant Shaft-Mount Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring. Rollers have end seals to protect rolling elements from dirt and contamination.
Roller | Radial Load Cap., lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||
| 1 1/2" | 7/8" | 7/16" | 15/16" | 2,500 | 11,000 | 4,000 | 250° | Needle Roller | 0000000 | 0000000 |
Shaft-Mount V-Groove Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
Roller | Groove | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||
| 2 1/2" | 7/8" | 7/16" | 15/16" | 3/4" | 3/8" | Not Rated | 780 | 1,800 | 480 | 225° | Tapered Roller | 0000000 | 0000000 |
Flanged Shaft-Mount Track Rollers
Shaft-mount track rollers have more mounting flexibility than threaded track rollers. Because they’re flanged, they can handle both radial and thrust (top and side) loads. The flange also provides guidance and helps rollers stay on track. All are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
Roller | Shoulder | Flange | Static Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Dia. | Lg. | OD | Thick. | Max. Speed, rpm | Radial | Thrust | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||||||
| 1 1/2" | 7/8" | 7/16" | 15/16" | 7/8" | 1/32" | 2 3/16" | 7/32" | 14,000 | 1,100 | 280 | 225° | Tapered Roller | 0000000 | 0000000 |