McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    60 Products

    Pipe Flashings for Corrugated-Metal Roofs

    Image of Product. Front orientation. Pipe Flashings. Pipe Flashings for Corrugated-Metal Roofs.
    These flashings allow pipes that penetrate your roof to expand, contract, and vibrate without disturbing the watertight seal. Trim the rubber cap to fit a range of pipe sizes. All caps resist water, sunlight, and ozone.
    Silicone Rubber Cap—Silicone rubber caps withstand higher temperatures than EPDM caps. They’re often used with gas vents and hot roof pipes for heaters and stoves.
    Flange
    For No.
    of Pipes
    For Pipe
    OD
    Lg.
    Wd.
    Overall
    Ht.
    Temp. Range,
    ° F
    Base
    Material
    Cap
    Color
    Includes
    Each
    EPDM Cap
    11/4" to 4"7 5/8"7 5/8"5 1/2"-60 to 270AluminumGrayStainless Steel Clamps7503T3000000
    14" to 8"12 1/4"12 1/4"5 1/2"-60 to 270AluminumGrayStainless Steel Clamps7503T400000
    17" to 13"17 1/4"17 1/4"7 1/8"-60 to 270AluminumGrayStainless Steel Clamps7503T5000000
    113" to 26"30 1/4"30 1/4"7 7/8"-60 to 270AluminumGrayStainless Steel Clamps7503T11000000
     
    Silicone Rubber Cap
    11/4" to 4"7 5/8"7 5/8"5 1/2"-100 to 500AluminumOrangeStainless Steel Clamps7503T2100000
    14" to 8"12 1/4"12 1/4"5 1/2"-100 to 500AluminumOrangeStainless Steel Clamps7503T31000000
    17" to 13"17 1/4"17 1/4"7 1/8"-100 to 500AluminumOrangeStainless Steel Clamps7503T41000000
     

    Pipe Flashings for Single-Ply and Built-Up Roofs

    Image of Product. Front orientation. Pipe Flashings. Pipe Flashings for Single-Ply and Built-Up Roofs, For 1 Pipe.
    Image of Product. Front orientation. Pipe Flashings. Pipe Flashings for Single-Ply and Built-Up Roofs, For 2 Pipes.

    For 1 Pipe

    For 2 Pipes

    These flashings allow pipes that penetrate your roof to expand, contract, and vibrate without disturbing the watertight seal. Trim the rubber cap to fit your pipe.
    For No.
    of Pipes
    For Pipe OD
    Flange
    Dia.
    Overall
    Ht.
    Temp. Range,
    ° F
    Base
    Material
    Cap
    Color
    Includes
    Each
    Rubber Cap
    12" to 6"14"8"-60 to 270AluminumBlackStainless Steel Clamps7503T10000000
    23/8" to 1", 1" to 2"14"6 1/2"-60 to 270AluminumBlackStainless Steel Clamps7503T2000000
     

    Gas Chimney Vent Pipe and Fittings

    For use with gas-fired equipment, such as boilers and furnaces, these vent pipes and fittings withstand temperatures up to 400° F. Also known as type B gas vents.
    To join pipes and connectors, insert a male end into a female end and secure with the included locking band.
    Roof Flashings
    Image of Product. Front orientation. Chimney Pipe and Fittings. Gas Chimney Vent Pipe and Fittings, Roof Flashings.
    Roof flashing requires a storm collar (sold separately).
    Steel
    Chimney
    Pipe Size
    ID
    For Max.
    Roof Pitch
    Ga.
    Each
    44 1/2"6/12282117K52000000
    55 1/2"6/12282117K5300000
    66 1/2"6/12282117K5400000
    78"6/12282117K5500000
    89"6/12282117K5600000
     
    Storm Collars
    Image of Product. Front orientation. Chimney Pipe and Fittings. Gas Chimney Vent Pipe and Fittings, Storm Collars.
    Steel
    Chimney
    Pipe Size
    ID
    Ga.
    Each
    44 1/2"282117K6200000
    55 1/2"282117K6300000
    66 1/2"282117K6400000
    78"282117K6500000
    89"282117K6600000
     

    Duct Vent Caps

    Image of Product. Front orientation. Duct and Fittings. Duct Vent Caps, Sloped Roof Mount.

    Sloped Roof Mount

    Cover wall and roof vents to prevent cold air and debris from entering your system. These caps have damper to reduce backdrafts and a screen that blocks birds from sneaking in.
    Painted Steel—Strong for a long life, these caps have a black finish to prevent rust.
    For
    Duct
    Painted Steel
    Ht.
    Wd.
    Dia.
    Ht.
    Wd.
    Lg.
    Color
    Each
    Sloped Roof Mount
     
    For Rectangular and Round Duct
    10"3 1/4"8"6 5/8"14 1/4"18 3/4"Black6904K34000000
     

    Pipe Flashings for 40° Shingled Roofs

    Image of Product. Front orientation. Pipe Flashings. Pipe Flashings for 40° Shingled Roofs.
    Use these flashings on plumbing vent pipes and two-walled, air-insulated vent pipes (also known as Type B roof vents). They allow pipes that penetrate your roof to expand, contract, and vibrate without disturbing the watertight seal.
    Flange
    For No.
    of Pipes
    For Pipe OD
    Lg.
    Wd.
    Overall
    Ht.
    Max. Temp.,
    ° F
    Base Material
    Cap
    Color
    Each
    Rubber Cap
    11 1/4" to 1 1/2"12 1/2"9"2 1/4"180Galvanized SteelBlack2390K41000000
    12"12 1/2"9"2 1/4"180Galvanized SteelBlack2390K4200000
    13"14 1/2"11"2 1/4"180Galvanized SteelBlack2390K4300000
    14"15"12"3 1/4"180Galvanized SteelBlack2390K4400000
     

    High-Temperature Chimney Vent Pipe and Fittings

    Built to withstand temperatures up to 1000° F, these vent pipes and fittings are for use with boilers, furnaces, stoves, and other equipment that is fired by gas, oil, wood, or coal.
    To join pipes and connectors, twist a male end into a female end and secure with the included locking band.
    Roof Flashings
    Image of Product. Front orientation. Chimney Pipe and Fittings. High-Temperature Chimney Vent Pipe and Fittings, Roof Flashings.
    Aluminum Zinc
    Alloy-Coated Steel
    Chimney
    Pipe Size
    For Max.
    Roof Pitch
    Ga.
    Includes
    Each
    66/1228Storm Collar1716K7110000000
    86/1228Storm Collar1716K8000000
    106/1228Storm Collar1716K9000000
     
    Storm Collars
    Image of Product. Front orientation. Chimney Pipe and Fittings. High-Temperature Chimney Vent Pipe and Fittings, Storm Collars.
    Aluminum Zinc
    Alloy-Coated Steel
    Chimney
    Pipe Size
    Ga.
    Each
    6281716K96000000
    8281716K9700000
    10281716K9800000
     

    Pipe Flashing Seals

    Image of Product. Top orientation. Pipe Flashing Seals.
    Slide these seals over roof flashings for added protection and to create an extra-watertight seal without the need for caulk. They’re also known as storm or rain collars.
    For No.
    of Pipes
    For Pipe OD
    OD
    Overall
    Ht.
    Temp. Range,
    ° F
    Material
    Color
    Each
    11 1/4" to 1 1/2"3 7/8"1 1/8"-50 to 180Rubber
    		Black4521N1100000
    11 1/2" to 3"5 1/2"1 5/8"-50 to 180Rubber
    		Black4521N120000
    13" to 4"6 1/2"1 3/4"-50 to 180Rubber
    		Black4521N130000

    Aluminum Foil Tape

    Image of Product. Front orientation. Repair and Duct Tape. Aluminum Foil Tape.
    Create permanent, watertight seals for roof flashing, seams, and pipes. An aluminum-foil backing shields the adhesive from UV rays and harsh weather, so the bond stays strong over time. It adheres to virtually any building material, including metal, wood, plastic, concrete, brick, asphalt, and glass.
    Wd.
    Lg.,
    ft.
    Overall
    Thk.
    Adhesive
    Material
    Temp. Range,
    ° F
    Tensile
    Strength
    Choose a
    Color
    Each
    2"330.011"Rubber
    		20 to 20020 lbf/in. wd.Silver7450A2000000
    2"330.05"Asphalt-40 to 200Not RatedGray, Silver76395A100000
    3"330.05"Asphalt-40 to 200Not RatedGray, Silver76395A200000
    4"330.05"Asphalt-40 to 200Not RatedGray, Silver76395A300000
    6"330.05"Asphalt-40 to 200Not RatedGray, Silver76395A400000
    9"330.05"Asphalt-40 to 200Not RatedSilver76395A1600000
    12"330.05"Asphalt-40 to 200Not RatedSilver76395A18000000
    18"330.05"Asphalt-40 to 200Not RatedSilver76395A21000000

    Self-Fusing Rubber Sealing Tape

    Image of Product. Front orientation. Repair and Duct Tape. Self-Fusing, Sealing.
    Bonds to itself for a permanent, watertight seal. This tape has no adhesive, so it won't dry out and crack, which can cause standard tape to fail over time. The rubber backing molds to irregular surfaces and withstands demanding conditions, making this tape a good choice for patching and sealing anything from roofs to pipes.
    Butyl Rubber—Creates an airtight, impermeable seal. It also stretches and conforms better than EPDM rubber tape.
    EPDM Rubber—A good choice for outdoor applications, it withstands sunlight, ozone, and weathering.
    Polyolefin/Rubber—Sticks to most surfaces, including vinyl, fiberglass, PVC, wood, tile, and even damp nonporous surfaces.
    Wd.
    Lg.,
    ft.
    Overall
    Thk.
    Temp. Range,
    ° F
    Tensile
    Strength
    Color
    Each
    Butyl Rubber
    1/2"250.125"-40 to 20015 lbf/in. wd.Gray76385A35000000
    1"500.125"-20 to 18010 lbf/in. wd.Black76385A1400000
    1 1/2"500.125"-20 to 18010 lbf/in. wd.Black76385A1500000
    2 1/2"250.125"-40 to 20015 lbf/in. wd.Gray76385A1900000
    3"250.051"-40 to 180Not RatedBlack76385A8500000
    4"250.125"-20 to 18010 lbf/in. wd.Black76385A2200000
    8"250.125"-20 to 18010 lbf/in. wd.Black76385A17000000
     
    EPDM Rubber
    6"250.075"-20 to 180Not RatedBlack7529A52000000
    6"250.08"-20 to 180Not RatedWhite7529A53000000
    9"250.084"-20 to 180Not RatedBlack7529A51000000
     
    Polyolefin/Rubber
    4"250.0295"-20 to 180Not RatedBlack6165N1100000
    4"250.0295"-20 to 180Not RatedWhite6165N1200000
    6"250.0295"-20 to 180Not RatedBlack6165N1300000
    6"250.0295"-20 to 180Not RatedWhite6165N1400000
     

    All-Weather Application Sealants

    Image of Product. Front orientation. Sealants. All-Weather Application Sealants.
    Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
    Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
    Cannot Be Sold To—Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).
    Container
    Temp.,
    ° F
    Size, fl.
    oz.
    Type
    Begins to
    Harden
    Reaches Full
    Strength, day
    Elongation
    Joint Compression/Expansion
    Tolerance
    Tensile Strength,
    psi
    Hardness Rating
    Application
    Temp. Range, ° F
    Min.
    Max.
    For Joining
    Cannot Be Sold To
    Color
    (Clarity)
    Each
    Polymer
    9Cartridge10 min.3450%-50% to 50%385Medium Soft (Durometer 44A)0 to 140-10150Glass
    Masonry
    Metal
    Wood
    Metal to Glass
    Wood to Glass    		—Clear (Clear)74565A111000000
    9.5Cartridge20 min.3570%-50% to 50%230Soft (Durometer 32A)0 to 140-10150Glass
    Masonry
    Metal
    Wood
    Metal to Glass
    Wood to Glass    		—Black (Opaque)74565A11300000
    9.5Cartridge20 min.3570%-50% to 50%230Soft (Durometer 32A)0 to 140-10150Glass
    Masonry
    Metal
    Wood
    Metal to Glass
    Wood to Glass    		—White (Opaque)74565A11200000
    10Cartridge1 sec.5870%-25% to 25%405Soft (Durometer 20A)0 to 140-40180Masonry
    Metal
    Wood    		—Clear (Clear)74565A700000
    10Cartridge1 sec.5870%-25% to 25%405Soft (Durometer 25A)0 to 140-40180Masonry
    Metal
    Wood    		California
    Canada    		White (Opaque)74565A800000
     
    back to top