These loosely knitted fiberglass seals are more flexible, compressible, and conformable than High-Temperature Rope Edge Seals.

Made of 96% silica, these seals resist temperatures up to 1800° F.

Made from tightly woven calcium alumina silicate, these seals can handle temperatures from –300° to 1100° F.

These loosely-knitted fiberglass seals are more flexible and conformable than High-Temperature Slotted Edge Seals. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

These seals have a strong Inconel core covered with woven silica yarn that’s been treated to withstand temperatures up to 2300° F. They resist most refrigerants, salts, and grease.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

Also known as 100% GFO, these expanded PTFE seals contain graphite powder, which dissipates heat away from the shaft and allows pumps to run cool at high speeds.

These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications.

Built for high-speed pump and valve applications, these super-tough seals are made of expanded-graphite yarn with carbon-yarn corners.

Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps.

These seals require lighter packing pressure than standard oil- and water-resistant packing seals, so they cause less friction and reduce shaft wear. They’re made of graphite-impregnated aramid fiber and are for use in pumps and valves.