1" Rope | McMaster-Carr

Filter by

System of Measurement

Length

Construction

Braided Cover with Braided Core

Color

Material

Weight Capacity

Application

Attachment Type

Strand Color

Performance

REACH

Can Be Spliced

Maximum Temperature

Cover Material

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

RoHS

Fitting Type

Environment

Finish

Vertical Capacity

10,000 lb. to 19,999 lb.

Wire Rope Construction

Loop Inside Width

For Use With

43 Products

Wet-Environment Sure-Grip Rope—Not for Lifting

This polypropylene rope floats in water, resists rot, and doesn’t lose strength when wet. It also resists acid, oil, and gas. The twisted construction gives rope a grooved surface, allowing you to grip it tight without it slipping.

Note: The safety factor for capacity is 12:1.

	Can Be Spliced	Choose a Color	Choose a Length, ft.		Per Ft.
Polypropylene







	Twisted

	1"	1,000	200	Yes	Black, White, Yellow	10, 25, 100, 200, 300, 600	3837T23	00000


	1"	1,800	200	Yes	Light Green	10, 25, 100, 200, 600, 1,200	3875T8	0000

Extra-Sure-Grip Rope—Not for Lifting

Softer than all other sure-grip rope, this manila rope is more comfortable to grip. Its twisted construction gives it a grooved surface, so you can grip it tight without it slipping.

Note: The safety factor for capacity is 12:1.

	Color	Can Be Spliced	Choose a Length, ft.		Per Ft.
Manila







	Twisted

	1"	650	160	Brown	Yes	10, 25, 50, 100, 200, 600, 1,200	3825T36	00000

Shock-Absorbing Wear-Resistant Rope—Not for Lifting

A braided nylon core protected by a braided cover makes this rope resistant to both wear and sudden forces, such as those found in towing applications and dock lines. The braided construction also prevents the rope from rotating under load. When wet, this rope can lose up to 20% of its strength. It resists rot.

Note: The safety factor for capacity is 12:1.

Nylon Cover—Nylon-covered rope resists mildew.

	Color	Can Be Spliced	Choose a Length, ft.		Per Ft.
Nylon







	Braided Nylon Cover with Braided Core

	1"	2,500	300	White with Blue and Red Strands	Yes	5, 10, 50, 100, 300, 600	3836T38	00000

Shock-Absorbing Sure-Grip Rope—Not for Lifting

Use this nylon rope when you need to compensate for sudden force, such as in towing applications or dock lines. It is rot and mildew resistant. When wet, the rope can lose up to 20% of its strength. The twisted construction gives this rope a grooved surface, allowing you to grip it tight without it slipping.

Note: The safety factor for capacity is 12:1.

	Color	Can Be Spliced	Choose a Length, ft.		Per Ft.
Nylon







	Twisted

	1"	1,800	300	White	Yes	10, 25, 50, 100, 300, 600	3827T22	00000

Low-Stretch Sure-Grip Rope—Not for Lifting

Choose this polyester rope for applications that require minimal stretch, such as in tie-down applications. It resists UV rays, rot, oil, and gas, and will not lose strength when wet. The twisted construction gives it a grooved surface, allowing you to grip it tight without it slipping.

Note: The safety factor for capacity is 12:1 safety factor.

	Color	Can Be Spliced	Choose a Length, ft.		Per Ft.
Polyester Plastic







	Twisted

	1"	1,600	200	White	Yes	10, 50, 100, 300, 600	3828T26	00000

UV-Resistant Wet-Environment Sure-Grip Rope—Not for Lifting

Also known as truck tie-down rope, this rope has added UV-ray inhibitors to protect it from deterioration when used outdoors. Rope is polypropylene so it floats in water, resists rot, and doesn’t lose strength when wet. It also resists acid, oil, and gas. The twisted construction gives rope a grooved surface, allowing you to grip it tight without it slipping.

Note: The safety factor for capacity is 12:1.

	Color	Can Be Spliced	Choose a Length, ft.		Per Ft.
Polypropylene







	Twisted

	1"	1,000	200	Black with Orange Strands	Yes	10, 100, 200, 300, 600	3818T26	00000

Lightweight Low-Stretch Sure-Grip Rope—Not for Lifting

Made of a polyester/polypropylene blend, this rope is approximately 15% lighter than standard polyester rope. Use it for applications that require minimal stretch, such as in tie-down applications. It resists UV rays, rot, oil, and gas, and will not lose strength when wet. The twisted construction gives it a grooved surface, allowing you to grip it tight without it slipping.

Note: The safety factor for capacity is 12:1.

	Color	Can Be Spliced	Choose a Length, ft.		Per Ft.
Polyester/Polypropylene







	Twisted

	1"	1,900	200	Light Blue with Green and Red Strands	Yes	5, 10, 50, 100, 300, 600	8878T77	00000

Crosby Forged Single-Saddle Wire Rope Clamps—Not for Lifting

These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. They’re also known as wire rope clips. Clamps have a thick coating for corrosion resistance.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

	For Wire Rope				Clamp										Each
	Dia.	Construction	Number of Clamps Required	Rope Turnback	Wd.	Ht.	Thk.	Color	Fabrication	Req. Torque, ft·lbf	Rope Cap. Adjustment Factor	Specs. Met	Mil. Spec.		1-9	10-Up
Galvanized Steel



		1"	6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core	5	26"	3 1/2"	4 1/4"	2 11/16"	Red	Forged	225	90%	ASME B30.26	Fed. Spec. FF-C-450	3465T22	000000	000000

Marlin Spikes

For Rope

For Wire Rope

Fray rope for splicing and to attach fittings. The spike length may vary slightly.

				For Rope		For Wire Rope
Lg.	Dia.	Hole Dia.	Material		Each		Each
8"	1"	5/16"	Steel	3876T12	000000	3876T17	000000
10"	1"	5/16"	Steel	3876T13	00000	3876T18	00000
12"	1"	5/16"	Steel	3876T14	00000	3876T19	00000

Heavy Duty Wire Rope Thimbles—For Lifting

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

Galvanized Steel—Galvanized steel thimbles have a thick coating for corrosion resistance.

18-8 Stainless Steel—18-8 stainless steel thimbles are more corrosion resistant than steel thimbles.

316 Stainless Steel—316 stainless steel thimbles are the most corrosion resistant thimbles we offer. They provide excellent resistance to salt water and chemicals.

		Loop
	For Dia.	Inside Lg.	Inside Wd.	Mil. Spec.		Each
Galvanized Steel



		1"	4 1/2"	2 1/2"	Fed. Spec. FF-T-276	3495T24	000000


		18-8 Stainless Steel



				1"	4 13/16"	2 9/16"	Fed. Spec. FF-T-276	3495T43	00000


				316 Stainless Steel



						1"	4 13/16"	2 9/16"	Fed. Spec. FF-T-276	3495T62	00000

Forged Stainless Steel Single-Saddle Wire Rope Clamps—Not for Lifting

Made of 316 stainless steel, these clamps are corrosion resistant. They must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. They’re also known as wire rope clips.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

	For Wire Rope				Clamp							Each
	Dia.	Construction	Number of Clamps Required	Rope Turnback	Wd.	Ht.	Thk.	Fabrication	Req. Torque, ft·lbf	Rope Cap. Adjustment Factor		1-9	10-Up
316 Stainless Steel



		1"	6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core	5	26"	3 15/32"	4 19/64"	2 19/32"	Forged	225	80%	1973N23	0000000	0000000

Medium Duty Wire Rope Thimbles—Not for Lifting

Also known as standard-pattern thimbles, these provide better protection against fraying than light-duty thimbles.

Warning: Do not use with coated rope unless the coating is removed.

Galvanized Steel—Zinc-plated and galvanized steel thimbles are corrosion resistant.

18-8 Stainless Steel—18-8 stainless steel thimbles are more corrosion resistant to chemicals than steel thimbles.

316 Stainless Steel—316 stainless steel thimbles are the most corrosion resistant thimbles we offer. They provide excellent resistance to salt water and chemicals.

		Loop
	For Dia.	Inside Lg.	Inside Wd.	Mil. Spec.		Each
Galvanized Steel



		1"	4 1/4"	2 1/2"	Fed. Spec. FF-T-276	3494T21	000000


		18-8 Stainless Steel



				1"	3 1/4"	2"	Fed. Spec. FF-T-276	3868T53	00000


				316 Stainless Steel



						1"	3 1/4"	2"	Fed. Spec. FF-T-276	3868T33	00000

Cast Wire Rope Clamps—Not for Lifting

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

Galvanized Iron—Galvanized iron clamps have a thicker coating than zinc-plated clamps for added corrosion resistance.

Zinc-Plated Iron—Zinc-plated iron clamps are mildly corrosion resistant.

18-8 Stainless Steel—18-8 stainless steel clamps are more corrosion resistant than galvanized clamps.

	For Wire Rope				Clamp							Each
	Dia.	Construction	Number of Clamps Required	Rope Turnback	Wd.	Ht.	Thk.	Fabrication	Req. Torque, ft·lbf	Rope Cap. Adjustment Factor		1-24	25-99	100-Up
Iron



		1"	1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core	6	31"	2 11/16"	3 25/32"	15/16"	Cast	130	Not Rated	30325T72	000000	000000	00000


		Galvanized Iron



				1"	1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core	6	31"	2 11/16"	3 25/32"	15/16"	Cast	130	Not Rated	30325T91	00000	00000	00000


				Zinc-Plated Iron



						1"	1 × 7 Strand Core 1 × 19 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core	6	31"	2 11/16"	3 25/32"	15/16"	Cast	130	Not Rated	30325T37	00000	00000	00000


						18-8 Stainless Steel



								1"	1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core	5	26"	3"	4 3/8"	2 7/16"	Cast	225	80%	31985T29	00000	00000	00000

Wire Rope Slings

These slings are more abrasion and cut resistant than web and round slings, yet lighter in weight than mesh and chain slings. They include a tag that shows capacities in each configuration.

Warning: Never use to lift people or items over people.

With Crimped Eye

With

Crimped

Eye

Choker

Basket

Vertical

Crimped eye slings are secured with a metal sleeve.

6 × 19 Wire Rope—6 × 19 construction is more flexible than 7 × 7.

			Capacity, lb.
	Length	Dia.	Choker	Vertical	Basket	Eye Lg.	Material	Max. Temp., ° F	Specs. Met		Each
6 × 19 Wire Rope—IWRC







				Steel

				5 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T315	0000000


				6 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T316	000000
				7 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T317	000000
				8 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T318	000000
				9 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T319	000000
				10 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T32	000000
				11 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T321	000000
				12 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T322	000000
				13 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T323	000000
				14 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T324	000000
				15 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T325	000000


				16 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T326	000000
				17 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T327	000000
				18 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T328	000000
				19 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T329	000000
				20 ft.	1"	14,400	19,600	40,000	16"	Steel	400	OSHA Compliant 29 CFR 1910.184 ASME B30.9	3550T33	000000

Crosby Forged Double-Saddle Wire Rope Clamps—Not for Lifting

These clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. They provide a saddle for both the long (live) and the short (dead) end of the wire rope. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. Also known as fist grip wire rope clips.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

	For Wire Rope				Clamp									Each
	Dia.	Construction	Number of Clamps Required	Rope Turnback	Wd.	Ht.	Thk.	Fabrication	Req. Torque, ft·lbf	Rope Cap. Adjustment Factor	Specs. Met	Mil. Spec.		1-9	10-Up
Galvanized Steel



		1"	6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core	5	37"	3 1/16"	4 1/2"	2 1/4"	Forged	225	90%	ASME B30.26	Fed. Spec. FF-C-450	3466T37	000000	000000