We will reply to your message within an hour.
More
Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.
Draw lightweight surfaces together with these latches.
Use these L-handle latches to draw lightweight surfaces together.
Lift and turn the handle 180° to open and close these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
Use a 5/16" hex key to open and close these locks.
Lift and turn the handle 180° to open and close this lock.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
The mounting screws on these latches are concealed to prevent tampering.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.
The T-handle lays flush in the recess, so you won’t bump into or catch your clothes on these latches. Also called quarter-turn latches, they have a cam that rotates 90° to secure enclosures.
Fold the ring handle into the recess to stay out of the way when not in use.
With a flat inset grip, the handle is recessed to stay out of the way.
Designed for smaller-than-standard through holes, these latches are often used for securing doors and drawers.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
Designed for use in 1/2" dia. through holes.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
Raise the handle and it swings smoothly for easy latching and unlatching.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.
Choose these locks if you need each one to open with a different key.
Open these locks with both a master key and their own unique key.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.
When not in use, fold the handle into the recess to keep it out of the way. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a female hex key (sold separately), so they match a keying system that’s common for industrial enclosures and other machinery but are more secure than locks that open with a male hex key or screwdriver.
Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments.
Spot when these locks are open with just a glance—a red indicator shows they're unlocked. Also known as compression cam locks, their cam seals more tightly against a door or drawer than a standard cam to reduce rattling from vibration.
Install these locks in smaller-than-standard diameter through holes to secure enclosure doors and file drawers. They open with a hex key, so they’re great for a facility where you don’t need a complicated keying system.
These locks require a hex key to open.
For a simplified keying system, these cam locks open and close with a slotted screwdriver. Also called quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.
A master key opens all of these locks, which also have their own unique keys.
A hex key (not included) opens and closes these cam locks, simplifying your keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.
Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. They’re keyed alike, so they’re a good choice when you need several locks that open with the same key.
Secure enclosure doors with these L-handle locks. Choose them if you need several locks that open with the same key.
Open each of these locks with a different key.
Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code.
Similar to locks on a hotel safe, each user sets a new combination.
Secure these latches with a padlock.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Turn the handle to keep doors, drawers, and hatches closed.
Hold doors, drawers, and hatches closed with the turn of a handle.
Twist these latches to hold small lightweight doors and panels closed.
Often used on casement windows.