Measure speed on an easy-to read digital display. Contact tachometers come in direct contact with the object measured and are an excellent choice for dirty and dusty environments.

Install this tachometer in a convenient location. It updates twice per second when the reading exceeds 120 rpm.

Capture high-speed readings from a distance in noncontact mode or use the speed wheel to switch to contact mode. This tachometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

Shine a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. They have a _1/4"-20 female threaded bushing for tripod mounting.

Install in a convenient location. Use the buttons on the front panel to program the unit.

This tachometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Measure speed on an easy-to read digital display. Contact tachometers come in direct contact with the object measured and are an excellent choice for dirty and dusty environments.

Detect unwanted slowdowns in a rotary shaft that could cause machine damage and downtime. These switches are often used on drivetrains, conveyors, and other power-driven components. They come with a pulser disc, which you’ll need to attach to the shaft by drilling and tapping a hole. Once mounted, the disc rotates with the shaft and creates magnetic signals that the switch senses. When the speed falls below a set point, the switch will trigger an alarm or turn off the system.

Switches are UL listed and rated NEC Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G. They have an explosion-proof housing and are also rated NEMA 4X for washdown and corrosion protection.

Continuously measure the speed and running time of your engine to monitor its performance and detect mechanical issues early. These meters can be programmed based on engine run time to light up for maintenance reminders, such as oil changes, filter replacements, and inspections. Wrap the signal wire four to five times around your spark plug to secure it in place. They’re battery powered, so they will start showing readings as soon as you turn on the engine. It adjusts to nine different engine types for accurate readings.

Integrate these stroboscopes into fast-moving lines to check quality. They’re often used to inspect printed labels, rolled metal, and packaging. Channels on three sides allow you to attach them to T-slotted framing and other equipment. They shine bright and uniform pulsing light at moving parts to make them appear slower. This helps your machine vision camera and other digital inspection equipment identify defects. Connect them to sensors to trigger flashes at precise intervals in systems where timing and coordination are crucial. For synchronized usage along your line, you can daisy-chain multiple together. All come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

For visibility in all conditions, they have three light intensity settings. The lowest is often used for highly reflective surfaces, and the highest works well on dark and high-contrast materials. For quick changes between processes, their memory stores up to 10 light patterns.

Take speed and temperature measurements. This tachometer has a contact tip on one end and a noncontact sensor on the other.

This tachometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It takes both speed and temperature measurements. This unit has a contact tip on one end and a noncontact sensor on the other.

Noncontact tachometers emit a beam of light or laser that reflects off a piece of reflective tape attached to the rotating point.

Noncontact tachometers emit a beam of light or laser that reflects off a piece of reflective tape attached to the rotating point.

This tachometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Noncontact tachometers emit a beam of light or laser that reflects off a piece of reflective tape attached to the rotating point.

Measure speed and inspect moving equipment.

Carry these stroboscopes when performing facility maintenance checks. Shine its bright flashing light at a moving object to make it appear slow moving. This helps you evaluate belts, pulleys, and other parts for signs of wear without shutting down your machines. It has a female threaded bushing, so you can mount it to a tripod to hold it steady. This stroboscope comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

An aluminum housing makes this stroboscope strong and durable. It works by shining a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. It has a 3-pin female M16 threaded connector.

This stroboscope comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. An aluminum housing makes it strong and durable. It works by shining a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. It has a 3-pin female M16 threaded connector.

Shine a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. This unit has a _1/4"-20 female threaded bushing for tripod mounting.

This stroboscope comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It shines a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. It has a _1/4"-20 female threaded bushing for tripod mounting.

Keep your conveyor’s rollers turning at the right speed to reduce downtime caused by jams. These transmitters send signals to your programmable logic controller (PLC), so it can switch circuits on or off when a roller reaches a set speed. No need to drill a mounting hole—they attach by magnet.

Switch these tachometers from contact to noncontact mode by attaching the included adapter. They come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Contact tachometers come in direct contact with the object measured and are an excellent choice for dirty and dusty environments.