Rotary Stages | McMaster-Carr

Filter by

Table Diameter

10"

12"

16"

Positioning Table Type

Overall Height

Base Length

Export Control Classification Number (ECCN)

EAR99

Mounting Hole Center-to-Center

DFARS Specialty Metals

RoHS

T-Slot Width

Base Width

Material

Number of Mounting Holes

Number of T-Slots

Mounting Hole Diameter

5/16"

1/2"

5/8"

Rotation Adjustment Dial Graduations

Height

Positioner Type

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Width

1 1/2"

Horizontal Load Capacity

Graduations

Gear Ratio

Center Bore Type

Vertical Load Capacity

Lathe Chuck Diameter

35 Products

Precision-Adjust Rotary Tables


Standard Table	Mounted Horizontally

Heavy Duty Table	Heavy Duty Tilting Table

Turn workpieces 360° for precise alignment during milling, drilling, and grinding. With finely ground worm gears, these tables give you fine control of your workpiece’s alignment to fractions of a degree. The gears also keep the tabletop from moving once your workpiece is in position, even if you bump it or press against it while you machine. Markings on the handle’s dial and the tabletop’s edge tell you how far you’ve moved, so you don’t overshoot your mark. The tabletop and base are ground so flat their surfaces vary less than the thickness of a single sheet of copy paper, so they give you the flattest and squarest possible surface for accurate work. The base also has both keyways and bolt slots to mount these tables in both vertical and horizontal orientations.

Heavy Duty Table—These tables move in smaller increments for finer control than our standard rotary tables. They’re also machined three times flatter, virtually eliminating uneven positioning. Once the table is in position, dual locks prevent even the slightest table rotation. Hardened and oil-immersed gears extend their life, especially in high-demand machining.

Heavy Duty Tilting Table—The same upgraded performance as our heavy duty standard tables but with an adjustable tilt. Tilt these tables between 0° and 90° to cut your workpieces at an angle. Compared to our standard rotary tables, these move in smaller increments for finer control. They’re also machined three times flatter to virtually eliminate uneven positioning. Dual locks prevent even the slightest table rotation after the table is in position. Hardened and oil-immersed gears extend their life, especially in high-demand machining.

Gear Ratio—Gear ratio describes how far the table rotates with every turn of the handle. For example, a 90:1 gear ratio means a 90° turn of the handle rotates the table 1°.

Tailstocks—Support long workpieces to improve stability during indexing and machining.

	Rotary Tables																			Tailstocks
		Load Cap., lb.			Base			T-Slots					Rotation Graduations
	Table Dia.	Horizontal	Vertical	Gear Ratio	Lg.	Wd.	Overall Ht.	No. of	Wd.	Ctr. Bore Type	Ctr. Bore Dia.	Machine Taper No.	Adjustment Dial	Table	Flatness Tolerance	Material	Mounting Fasteners Included		Each		Each
Standard Table



		8"	160	80	40:1	12"	9 1/2"	3 7/8"	2	5/8"	Straight	1 5/8"	—	1/20°	1°	0.002"	Iron	No	5209A1	000000000	8795N13	0000000


		10"	200	100	40:1	12"	9 1/2"	3 7/8"	2	5/8"	Straight	1 5/8"	—	1/20°	1°	0.002"	Iron	No	5209A2	00000000	8795N13	000000


		Heavy Duty Table



				6"	90	40	90:1	8"	6 5/16"	3 1/8"	3	3/8"	Morse Taper	—	Morse 3	1/10°	1°	0.0006"	Steel	No	5209A5	000000	8795N11	000000


				8"	175	85	90:1	10 1/2"	8 5/8"	4 1/8"	6	1/2"	Morse Taper	—	Morse 3	1/4°	1°	0.0006"	Steel	No	5209A6	00000000	8795N12	000000
				10"	195	110	90:1	12 3/4"	11"	4 1/2"	6	1/2"	Morse Taper	—	Morse 3	1/4°	1°	0.0006"	Steel	No	5209A7	00000000	8795N13	000000
				12"	265	130	90:1	15 5/16"	13"	5"	6	5/8"	Morse Taper	—	Morse 4	1/10°	1°	0.0006"	Iron	No	5209A8	00000000	8795N14	000000
				16"	310	130	90:1	20"	17"	5 1/8"	6	5/8"	Morse Taper	—	Morse 4	1/10°	1°	0.0006"	Iron	No	5209A9	00000000	8795N14	000000


				Heavy Duty Tilting Table



						6"	75	35	90:1	9 3/4"	6"	8 1/2"	3	3/8"	Morse Taper	—	Morse 3	1/4°	1°	0.0006"	Steel	No	5209A31	00000000	———	0

Precision-Adjust Cross-Slide Rotary Tables


Standard Table	Tilting Table

These tables do it all. They rotate 360° and slide on the X-Y axes to position your work with exact alignment. Cut with trapezoid-shaped Acme threads, the internal X-Y screws minimize backlash and won’t deform. They’re precision ground to ensure accurate cuts every time.

Mount these tables on your milling machine, drill press, or grinder. They reduce the height of your setup by over 30% compared to stacking rotary and milling tables. Balanced to prevent unintentional movement, the crank handles take less effort to turn than hand wheels. With bulbous grips, these handles fit comfortably in your palm. Graduations engraved on the bases of the handle and table help you line up your work in fractions of a degree. Tighten the locking clamp on the side of the table base to keep the table steady as you machine.

Tilting Table—The most versatile tables we offer. They also tilt in 1° increments to any angle between 0° and 90°, so you can machine parts from any direction. Tighten the hex bolts on the side plates to keep the table at your desired tilt.

Gear Ratio—Gear ratio describes how far the table rotates with every turn of the handle. For example, a 90:1 gear ratio means a 90° turn of the handle rotates the table 1°.

		Load Cap., lb.			Base		Max. Travel				T-Slots				Rotation Graduations
	Table Dia.	Horizontal	Vertical	Gear Ratio	Lg.	Wd.	X-Axis	Y-Axis	X- and Y-Axis Adjustment Dial Graduations	Overall Ht.	No. of	Wd.	Ctr. Bore Type	Ctr. Bore Dia.	Adjustment Dial	Table	Flatness Tolerance	Material	Mounting Fasteners Included		Each
Standard Table



		8"	160	80	40:1	6 1/4"	7 1/2"	4"	4"	0.001"	5 1/2"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A4	000000000


		10"	200	100	40:1	6 1/4"	7 1/2"	4"	4"	0.001"	5 3/8"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A7	00000000


		Tilting Table



				8"	160	80	40:1	5"	9"	4"	4"	0.001"	5"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A5	00000000


				10"	200	100	40:1	5"	9"	4"	4"	0.001"	5 3/4"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A8	00000000

Electric Welding Positioners

Mount a workpiece on these motorized turntables for smooth and continuous 360° rotary motion useful for creating circular welds. Turntables tilt and lock in place at angles up to 90° in 15° increments. Once the workpiece is attached to the turntable or chuck, press the foot pedal to start the motor. As the part rotates, your hands are free to focus on the weld.

Load capacity is reduced as the table is tilted.

25 lb. Load Capacity with 5" Dia. Turntable

Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, Turntable, 25 lb. Load Capacity with Horizontal Table.

		Base						Table Slots					Electrical
Rotation Speed Range, rpm	Max. Ground Current, amp	Lg.	Wd.	Overall Ht.	Wt., lb.	Tilt Increments	Max. Range of Motion	No. of	Lg.	Wd.	Voltage, V AC	Freq., Hz	Connection	No. of Blades	Cord Lg., ft.	Features		Each
0.4 to 6	400	7"	5"	9"	14	15°	360°	3	1 3/8"	3/8"	120	50, 60	Straight Blade	3	8	Grounding Stud	7860A356	000000000

Welding Positioner Chucks

		Each
Three-Jaw Chuck	7860A42	0000000

200 lb. Load Capacity with 12" Dia. Turntable

Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, 200 lb. Load Capacity with Horizontal Table, Turntable.

Remote Control Box—Positioners with a remote control box let you control the turntable cordlessly.

		Base						Table Holes				Electrical
Rotation Speed Range, rpm	Max. Ground Current, amp	Lg.	Wd.	Overall Ht.	Wt., lb.	Tilt Increments	Max. Range of Motion	No. of	Thread Size	Voltage, V AC	Freq., Hz	Connection	No. of Blades	Cord Lg., ft.	Features		Each
0 to 10	300	12"	12"	12"	55	15°	360°	3, 9	5/16"-18, 1/2"-13	120	60	Straight Blade	3	6	Grounding Stud, Remote Control Box	7860A21	000000000

Welding Positioner Chucks

		Each
Three-Jaw Chuck	7860A32	000000000

250 lb. Load Capacity with10" Dia. Turntable

Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, Turntable, 250 lb. Load Capacity with Horizontal Table.

		Base						Table Slots					Electrical
Rotation Speed Range, rpm	Max. Ground Current, amp	Lg.	Wd.	Overall Ht.	Wt., lb.	Tilt Increments	Max. Range of Motion	No. of	Lg.	Wd.	Voltage, V AC	Freq., Hz	Connection	No. of Blades	Cord Lg., ft.	Features		Each
1 to 6	400	12 1/2"	10 3/4"	9 7/8"	38	15°	360°	4	3 1/4"	7/16"	120	50, 60	Straight Blade	3	8	Grounding Stud	7860A394	000000000

Welding Positioner Chucks

		Each
Three-Jaw Chuck	7860A42	0000000

200 lb. Load Capacity with Three-Jaw Chuck

Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, 200 lb. Load Capacity with Three-Jaw Chuck.

Remote Control Box—Positioners with a remote control box let you control the turntable cordlessly.

	Chuck			Base									Electrical
Rotation Speed Range, rpm	OD	Cap.	Max. Ground Current, amp	Lg.	Wd.	Overall Ht.	Wt., lb.	Tilt Increments	Max. Range of Motion	Through-Hole Dia.	Voltage, V AC	Freq., Hz	Connection	No. of Blades	Cord Lg., ft.	Features		Each
0 to 10	6"	1/4" to 3 1/2"	300	14"	12"	12"	60	15°	360°	1.5"	120	60	Straight Blade	3	6	Grounding Stud, Remote Control Box	7860A22	000000000

Turntables

		Each
Turntable	7860A31	000000000

Rotary Angle Indexers


Indexer with Workpiece Shown in Vise	Indexer with Workpiece

Transform your machine vise into an indexing system in seconds. These indexers help you position round workpieces at precise, repeatable angles for machining flats, hexes, and key slots. Slide them onto the end of a workpiece and secure with the set screw. These indexers attach directly to your workpiece, so you can move them from setup to setup without losing your reference point. These indexers are etched with graduation marks up to 360° so you can line up your workpiece with a machinist square. A hex, square, and octagon are cut into the face, so you don’t need to check the graduations for 45°, 60°, or 90° increments.

For Workpiece Dia.	Angle Measured Range	Graduations	Angle Numeric Increments	Graduation Type	Lg.	Wd.	Thk.	Material	Includes		Each
1/4" to 1"	0° to 360°	5°	10°	Etched	1 1/2"	1 1/2"	3/4"	Zinc-Plated Steel	Set Screw	7866N102	000000
1" to 2"	0° to 360°	1°	10°	Etched	3"	3"	1 1/2"	Zinc-Plated Steel	Set Screw	7866N101	000000

Rotary Table Mounting Kits for Lathe Chucks

Use these kits to mount lathe chucks to your rotary table—they come with everything you need for a precise, rigid setup. Choose a kit that’s compatible with the brand and model of your rotary table.

	For Mfr. Model No.		Each
For Haas



	6"	HRC160, HRT160, HRT160SP, HRT160SS, TR160, TR200Y, TRT160	7698N121	0000000


	8"	HRC210, HRT210, HRT210SP, HRT210SS, TR210, TRT210	7698N122	000000
	10"	HRC210, HRT210, HRT210SP, HRT210SS, TR210, TRT210	7698N123	000000
	12"	HRT310, HRT310SP, TR310	7698N124	000000


	For Kitagawa



			8"	GT200, MR200	7698N125	000000


			10"	GT250, MR250	7698N126	00000000


			For DMG Mori



					8"	DDRT200	7698N127	000000


					10"	DDRT260	7698N128	000000


					For Hurco



							8"	H200	7698N129	000000


							10"	H250	7698N131	00000000

Tailstocks

Stabilize long workpieces for precise machining. These tailstocks hold your workpiece by its end to keep it straight and aligned. Adjust the center height to use them with a variety of rotary tables, indexing heads, and other fixture setups. Made of cast iron, they resist vibration and wear, so they’ll hold up to heavy duty machining tasks.

	Base				Mounting Slot
Ctr. Ht.	Lg.	Wd.	Ht.	Overall Ht.	No. of	Wd.	Mounting Fasteners Included	Material	Includes		Each
3 1/8" to 4 1/4"	5 3/8"	3 3/4"	3/4"	5 1/4"	2	5/8"	No	Cast Iron	Standard-Point Dead Center	8795N11	0000000
4 1/2" to 6"	6 1/8"	4 3/8"	7/8"	6 5/8"	2	5/8"	No	Cast Iron	Standard-Point Dead Center	8795N12	000000
5 1/8" to 8 1/8"	7 3/8"	5 1/2"	7/8"	9 1/4"	2	5/8"	No	Cast Iron	Standard-Point Dead Center	8795N13	000000
7 1/4" to 10 1/4"	8 1/8"	5 3/4"	1"	11 1/4"	2	5/8"	No	Cast Iron	Standard-Point Dead Center	8795N14	000000